Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

V.G. update

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
Rex Rodebush



Joined: 10 Jan 2006
Posts: 209
Location: Branson West area, Missouri

PostPosted: Tue Feb 06, 2018 3:25 pm    Post subject: V.G. update Reply with quote

Things are a little slow so I thought I would update my experience with v.g.'s

I added the Stolspeed v.g.'s on my Xtra (912 100 HP with Warp Drive 3-blade prop) last September. Placement per Stolspeed's recomendation except that I used the 60mm spacing from O.B to I.B. of the wing. Also centered the pair of V.G.'s in each valley between the ribs. I also added v.g.'s to the underside of the horizontal stabilizer.

The stall speed went from 40 indicated to 32 indicated and about 30 indicated with 20 degrees of flaps. I have 14 landings with the v.g.'s and they have been the best by far. It seems I have much more time to get the plane down to just a few inches above the runway than before. It also seems the pitch control is much more stable. Before I was always overcontroling up and down after the round out. That hasn't happened with the v.g.'s.

I'm very happy with them and have no regrets. I wish I had put them on sooner.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message
byoungplumbing(at)gmail.c
Guest





PostPosted: Tue Feb 06, 2018 4:09 pm    Post subject: V.G. update Reply with quote

Very comparable to the results that I had on my mklll

Boyd Young
Do not archive
On Feb 6, 2018 4:28 PM, "Rex Rodebush" <jrrodebush(at)gmail.com (jrrodebush(at)gmail.com)> wrote:
Quote:
--> Kolb-List message posted by: "Rex Rodebush" <jrrodebush(at)gmail.com (jrrodebush(at)gmail.com)>

Things are a little slow so I thought I would update my experience with v.g.'s

I added the Stolspeed v.g.'s on my Xtra (912 100 HP with Warp Drive 3-blade prop) last September.  Placement per Stolspeed's recomendation except that I used the 60mm spacing from O.B to I.B. of the wing.  Also centered the pair of V.G.'s in each valley between the ribs.  I also added v.g.'s to the underside of the horizontal stabilizer.

The stall speed went from 40 indicated to 32 indicated and about 30 indicated with 20 degrees of flaps.  I have 14 landings with the v.g.'s and they have been the best by far.  It seems I have much more time to get the plane down to just a few inches above the runway than before.  It also seems the pitch control is much more stable.  Before I was always overcontroling up and down after the round out.  That hasn't happened with the v.g.'s.

I'm very happy with them and have no regrets.  I wish I had put them on sooner.




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=477886#477886






====================================
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Kolb-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
====================================
WIKI -
errer" target="_blank">http://wiki.matronics.com
====================================
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================





- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group