Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Horizontal Stabilizer Safety Bulletin 2017

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith601-List
View previous topic :: View next topic  
Author Message
psm(at)att.net
Guest





PostPosted: Mon Apr 23, 2018 6:51 am    Post subject: Horizontal Stabilizer Safety Bulletin 2017 Reply with quote

I'm not sure I understand the attach bracket problem.  That said, I didn't like the way the 4 aluminum parts holding the horizontal stabilizer in place on my Zodiac XL were performing.  The stabilizer could be moved easily by applying force on the end.  So I changed them to steel.  The stabilizer is firmly attached on my plane.

We should remember there was no revision control on the Zodiac XL changes.  It is possible that each one of the thousand copies of this design is different from the others.

Paul
Camas, WA
CH601 XL (I installed the upgrade but didn't change the part number to "B".  My plane was already registered when Zenith decided the upgrade changed the part number.)

On 4/23/2018 6:53 AM, Bobby Paulk wrote:

Quote:

Re: Horizontal Stabilizer Safety Bulletin 2017



While doing my "Condition" Inspection I found out about the cracked attach brackets on the Zodiac. I examined all the visible ones very carefully and found no problems. I believe the cracking is due to very poor workmanship and using an over sized washer that extended into the curved radius of the bend in the metal. The photos on the site are a sign of very poor workmanship and not a design problem. My plane was built using the fast build kit and the Horizontal Stabilizer spar and attach fittings came assembled from the factory. 
I would like to know what most builders are doing about the 2 angles inside the skin. At this time I do not believe I will remove and cut the hole to examine them.

Any input from builders would be appreciated.

Thank You



Bobby

Zodiac 601 "B"

Jabiru 3300  295 hrs.


- The Matronics Zenith601-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith601-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group