Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Vista ventilators

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
Phil B



Joined: 31 Aug 2010
Posts: 21
Location: South Wales, UK

PostPosted: Fri Jun 22, 2018 4:52 am    Post subject: Vista ventilators Reply with quote

Has anyone installed or have any comments on installing a couple of Vista vents, light plane cabin ventilators (Aircraft Spruce part No. 13-03500) in the doors of a Europa (photo attached). I would prefer to mount them in the ¼ lights but have been told that the windshield is a stressed item. There’s no maximum speed limit on these vents and definitely need some ventilation while this hot weather continues.
Thanks in advance.


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List



Vista vent.jpg
 Description:
 Filesize:  558.12 KB
 Viewed:  7562 Time(s)

Vista vent.jpg



_________________
Phil B
Back to top
View user's profile Send private message
spcialeffects



Joined: 29 Aug 2012
Posts: 305
Location: Kent

PostPosted: Sat Jun 23, 2018 2:13 am    Post subject: Re: Vista ventilators Reply with quote

Hi Phil. Have you considered the ultimate vents? They work very well

Frank Xuereb
Kit#165


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Phil B



Joined: 31 Aug 2010
Posts: 21
Location: South Wales, UK

PostPosted: Sat Jun 23, 2018 6:45 am    Post subject: Re: Vista ventilators Reply with quote

My post should have read " I would prefer to mount them [the Vista vents] in the quarter lights [lower corners of the windscreen] but have been told that the windshield is a stressed item." Unfortunately the quarter was written as a figure and did not come through as such on the Matronics list.

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Phil B
Back to top
View user's profile Send private message
Phil B



Joined: 31 Aug 2010
Posts: 21
Location: South Wales, UK

PostPosted: Sun Jun 24, 2018 1:33 am    Post subject: Re: Vista ventilators Reply with quote

Frank,
I already have the Vista vents and was hoping to install them in the windscreen or door windows as they are transparent unlike the Ultimate vents.


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Phil B
Back to top
View user's profile Send private message
willydewey



Joined: 24 Sep 2014
Posts: 53
Location: Guildford Surrey United Kingdom

PostPosted: Mon Jun 25, 2018 1:28 am    Post subject: Re: Vista ventilators Reply with quote

Yes guys this is the time to do it in the northern hemisphere
Mine work well enough but were supplied with screws that have a tapered, angled shank., this put undue pressure on the cent and caused starring on the vent which I find unacceptable.. Better to substitute straight screws with no taper on the shank


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Give a wise man knowledge and he will be yet wiser
Back to top
View user's profile Send private message Send e-mail
Phil B



Joined: 31 Aug 2010
Posts: 21
Location: South Wales, UK

PostPosted: Mon Jun 25, 2018 11:33 pm    Post subject: Re: Vista ventilators Reply with quote

Willy,
Where did you install your Vista vents - doors or lower windscreen just iin front of the doors?


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Phil B
Back to top
View user's profile Send private message
willydewey



Joined: 24 Sep 2014
Posts: 53
Location: Guildford Surrey United Kingdom

PostPosted: Tue Jun 26, 2018 12:38 am    Post subject: Re: Vista ventilators Reply with quote

put mine in the lower front screen in front of the doors this doesnt interfere with the door latch......easy peezy
Bill


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Give a wise man knowledge and he will be yet wiser
Back to top
View user's profile Send private message Send e-mail
Phil B



Joined: 31 Aug 2010
Posts: 21
Location: South Wales, UK

PostPosted: Tue Jun 26, 2018 6:34 am    Post subject: Re: Vista ventilators Reply with quote

Thanks Bill that's where mine are now going

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Phil B
Back to top
View user's profile Send private message
Phil B



Joined: 31 Aug 2010
Posts: 21
Location: South Wales, UK

PostPosted: Mon Jul 16, 2018 10:47 am    Post subject: Re: Vista ventilators Reply with quote

Bill,
Finally went to install the Vista vents today but found the lower front screen in front of the doors is not flat and will therefore distort the Vista vent when the screws are tightened. How does this affect the operation of the vents and will it put any undue stresses on the windscreen? Any suggestions on the location of the vents?
Thanks in advance.


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Phil B
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group