Matronics Email Lists Forum Index Matronics Email Lists
BBS Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

AW: Re: Can anyone help me with a wing template?

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> KIS-List
View previous topic :: View next topic  
Author Message
r.twellmann(at)steute.com
Guest





PostPosted: Tue Nov 13, 2018 11:59 pm    Post subject: AW: Re: Can anyone help me with a wing template? Reply with quote

Hello,

here is a DXF file of the airfoil with the appropriate cord length of 1167 mm. (yes, we use the metric system Wink)
I also added the 3 degree line you need to set the wing to the right angle.
You should find somebody who has access to a big format printer to print it out for you.
Good luck with the construction of your plane and don`t hesitate to ask if you have further questions.

Best regards from Germany,
Ralf Twellmann (KIS# 104)
Tel.: +49 / (0)5731 745-158
Fax: +49 / (0)5731 745-222
mailto:r.twellmann(at)steute.com
http://www.steute.com
-----Ursprüngliche Nachricht-----
Von: owner-kis-list-server(at)matronics.com [mailto:owner-kis-list-server(at)matronics.com] Im Auftrag von threetracker
Gesendet: Mittwoch, 14. November 2018 05:26
An: kis-list(at)matronics.com
Betreff: Re: Can anyone help me with a wing template?



Tim has suggested that since the TR-1 wing is a straight wing someone could remove a wingtip and trace the planform for me. I do have the molded wing tips and I'm going to see how the traced shape looks for constructing a template.

Thank you Tm. It might just work and it's at least worth a try. I can carefully see how accurate a shape I can get off of two wing tips where they attach to the end of the wings. That is still more accurate than a guess at the shape based on ribs and skins.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=484997#484997


- The Matronics KIS-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?KIS-List



NACA_63-215_with_3_Degrees.DXF
 Description:

Download
 Filename:  NACA_63-215_with_3_Degrees.DXF
 Filesize:  68.64 KB
 Downloaded:  19 Time(s)

Back to top
Robert Reed



Joined: 22 Oct 2009
Posts: 270
Location: Dallas/Ft.Worth

PostPosted: Wed Nov 14, 2018 5:31 am    Post subject: AW: Re: Can anyone help me with a wing template? Reply with quote

Thank you Ralf, it’s great that after all this time the KIS builders are still supporting each other.

Thank you

Bob Reed
Sent from my iPhone

Quote:
On Nov 14, 2018, at 1:58 AM, Twellmann, Ralf <r.twellmann(at)steute.com> wrote:

Hello,

here is a DXF file of the airfoil with the appropriate cord length of 1167 mm. (yes, we use the metric system Wink)
I also added the 3 degree line you need to set the wing to the right angle.
You should find somebody who has access to a big format printer to print it out for you.
Good luck with the construction of your plane and don`t hesitate to ask if you have further questions.

Best regards from Germany,
Ralf Twellmann (KIS# 104)


Tel.: +49 / (0)5731 745-158
Fax: +49 / (0)5731 745-222
mailto:r.twellmann(at)steute.com
http://www.steute.com


-----Ursprüngliche Nachricht-----
Von: owner-kis-list-server(at)matronics.com [mailto:owner-kis-list-server(at)matronics.com] Im Auftrag von threetracker
Gesendet: Mittwoch, 14. November 2018 05:26
An: kis-list(at)matronics.com
Betreff: Re: Can anyone help me with a wing template?



Tim has suggested that since the TR-1 wing is a straight wing someone could remove a wingtip and trace the planform for me. I do have the molded wing tips and I'm going to see how the traced shape looks for constructing a template.

Thank you Tm. It might just work and it's at least worth a try. I can carefully see how accurate a shape I can get off of two wing tips where they attach to the end of the wings. That is still more accurate than a guess at the shape based on ribs and skins.




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=484997#484997









<NACA 63-215 with 3 Degrees.DXF>


- The Matronics KIS-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?KIS-List
Back to top
View user's profile Send private message Send e-mail Visit poster's website
r.twellmann(at)steute.com
Guest





PostPosted: Wed Nov 14, 2018 9:48 am    Post subject: AW: Re: Can anyone help me with a wing template? Reply with quote

My pleasure, Bob.
I forgot to mention that different from the drawing i sent, the airfoil on the KIS has no crusp at the trailing edge (the shape is not curved inwards) but straight. So simply replace the curve in the aileron/ flap area with a straight line. This was done to simplify construction.
Regards, Ralf

Quote:
Am 14.11.2018 um 14:33 schrieb Robert Reed <robertr237(at)att.net>:



Thank you Ralf, it’s great that after all this time the KIS builders are still supporting each other.

Thank you

Bob Reed
Sent from my iPhone

> On Nov 14, 2018, at 1:58 AM, Twellmann, Ralf <r.twellmann(at)steute.com> wrote:
>
> Hello,
>
> here is a DXF file of the airfoil with the appropriate cord length of 1167 mm. (yes, we use the metric system Wink)
> I also added the 3 degree line you need to set the wing to the right angle.
> You should find somebody who has access to a big format printer to print it out for you.
> Good luck with the construction of your plane and don`t hesitate to ask if you have further questions.
>
> Best regards from Germany,
> Ralf Twellmann (KIS# 104)
>
>
> Tel.: +49 / (0)5731 745-158
> Fax: +49 / (0)5731 745-222
> mailto:r.twellmann(at)steute.com
> http://www.steute.com
>
>
> -----Ursprüngliche Nachricht-----
> Von: owner-kis-list-server(at)matronics.com [mailto:owner-kis-list-server(at)matronics.com] Im Auftrag von threetracker
> Gesendet: Mittwoch, 14. November 2018 05:26
> An: kis-list(at)matronics.com
> Betreff: Re: Can anyone help me with a wing template?
>
>
>
> Tim has suggested that since the TR-1 wing is a straight wing someone could remove a wingtip and trace the planform for me. I do have the molded wing tips and I'm going to see how the traced shape looks for constructing a template.
>
> Thank you Tm. It might just work and it's at least worth a try. I can carefully see how accurate a shape I can get off of two wing tips where they attach to the end of the wings. That is still more accurate than a guess at the shape based on ribs and skins.
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=484997#484997
>
>
>
>
>
>
>
>
>
> <NACA 63-215 with 3 Degrees.DXF>







- The Matronics KIS-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?KIS-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> KIS-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group