Joined: 27 Mar 2019
Location: Milpitas CA
|Posted: Fri Apr 19, 2019 10:42 am Post subject: Fuel Reserve Idiot Lamp Module
Because my fuel gauges happen to be located on the right side of the panel I always felt long term that I needed something in my routine field of view on long cross country flights. I recently installed reserve idiot lights like most cars have. What you will need are two each of the following items, a little 22 AWG wire, some crimp lugs and some solder. I set my initial trip point at 190 Ohms which in my case is about 2.5gal. The module has an antibounce circuit.
I felt that the LEDs needed to be nice panel mount ones, so I used these instead of what came with the modules.
The instructions were okay except for the last part of section b). Method 1 for our SW senders should be connected as described in Method 2. He has the hookup information backwards.
|- The Matronics RV-List Email Forum -|
Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:http://www.matronics.com/Navigator?RV-List