Matronics Email Lists Forum Index Matronics Email Lists
BBS Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Yak-List Digest: 1 Msgs - 05/08/19

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
popesickel(at)mindspring.
Guest





PostPosted: Thu May 09, 2019 3:41 am    Post subject: Yak-List Digest: 1 Msgs - 05/08/19 Reply with quote

The experimental tail beacon is available. That’s what I’m working on for my CJ. I have made drawings of the tail cone, took all measurements
And have drawn the e etail beacon accurately in position of the CJ tail light. Our tail light comes out of the tail cone, leaving a 1 3/8” steel sleeve. It’s about 3/16” thick, so has enough meat to carefully grind the inside to meet the 1.413 opening needed for the unit to slide into. The opening, now is 1 1/8” inside, so it doesn’t have to be enlarged much. A
Small fairing can be made to streamline the tail cone to the larger tail beacon flange and I think will look like it’s made for the CJ.
That’s my project now, as I don’t want the wing unit either. I don’t feel the tail beacon will get bumped, like the wing will and I also already have strobes and don’t need that conversion. I also don’t mind the tail light being on all the time!
Sent from my iPhone

Quote:
On May 9, 2019, at 2:48 AM, Yak-List Digest Server <yak-list(at)matronics.com> wrote:

*

==================================================
Online Versions of Today's List Digest Archive
==================================================

Today's complete Yak-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Yak-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.

HTML Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 19-05-08&Archive=Yak

Text Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 19-05-08&Archive=Yak


================================================
EMail Version of Today's List Digest Archive
================================================


----------------------------------------------------------
Yak-List Digest Archive
---
Total Messages Posted Wed 05/08/19: 1
----------------------------------------------------------


Today's Message Index:
----------------------

1. 03:46 PM - ADSB Uavionix Tailbeacon adapter (bmiles)



________________________________ Message 1 _____________________________________


Time: 03:46:47 PM PST US
Subject: ADSB Uavionix Tailbeacon adapter
From: "bmiles" <miles(at)wambua.com>


I mounted the Skybeacon and it works fine but Ive ran into that thing like 5 times,
plus it doesnt look sexy.

Id much rather the tail beacon when it gets approve but has anyone heard of an
adapter for the tail beacon on a cj6


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=489137#489137










- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
Dawg



Joined: 19 May 2013
Posts: 351

PostPosted: Thu May 09, 2019 3:48 am    Post subject: Yak-List Digest: 1 Msgs - 05/08/19 Reply with quote

Take pix and build several.

😎

Quote:
On May 9, 2019, at 8:41 PM, Garry Pope <popesickel(at)mindspring.com> wrote:



The experimental tail beacon is available. That’s what I’m working on for my CJ. I have made drawings of the tail cone, took all measurements
And have drawn the e etail beacon accurately in position of the CJ tail light. Our tail light comes out of the tail cone, leaving a 1 3/8” steel sleeve. It’s about 3/16” thick, so has enough meat to carefully grind the inside to meet the 1.413 opening needed for the unit to slide into. The opening, now is 1 1/8” inside, so it doesn’t have to be enlarged much. A
Small fairing can be made to streamline the tail cone to the larger tail beacon flange and I think will look like it’s made for the CJ.
That’s my project now, as I don’t want the wing unit either. I don’t feel the tail beacon will get bumped, like the wing will and I also already have strobes and don’t need that conversion. I also don’t mind the tail light being on all the time!
Sent from my iPhone

> On May 9, 2019, at 2:48 AM, Yak-List Digest Server <yak-list(at)matronics.com> wrote:
>
> *
>
> ==================================================
> Online Versions of Today's List Digest Archive
> ==================================================
>
> Today's complete Yak-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the Yak-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 19-05-08&Archive=Yak
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 19-05-08&Archive=Yak
>
>
> ================================================
> EMail Version of Today's List Digest Archive
> ================================================
>
>
> ----------------------------------------------------------
> Yak-List Digest Archive
> ---
> Total Messages Posted Wed 05/08/19: 1
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 03:46 PM - ADSB Uavionix Tailbeacon adapter (bmiles)
>
>
>
> ________________________________ Message 1 _____________________________________
>
>
> Time: 03:46:47 PM PST US
> Subject: ADSB Uavionix Tailbeacon adapter
> From: "bmiles" <miles(at)wambua.com>
>
>
> I mounted the Skybeacon and it works fine but Ive ran into that thing like 5 times,
> plus it doesnt look sexy.
>
> Id much rather the tail beacon when it gets approve but has anyone heard of an
> adapter for the tail beacon on a cj6
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=489137#489137
>
>
>
>
>
>
>
>







- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

_________________
Dawg
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group