Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Z 16 question

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
wdaniell.longport(at)gmai
Guest





PostPosted: Sun Dec 18, 2022 5:19 pm    Post subject: Z 16 question Reply with quote

I am refitting my old voltage regulator after a failure of the bandc one I installed a year ago.   The bandc has built in ovp.  I am assuming that this is a manufacturing defect ...i had a very early version.

I have ordered a new one.

Meantime i am refitting a rotax regulator and I am also refitting my old ovp/relay
The z 16 shows the ovp from master to ground at the panel.
Could I install the ovp at the relay end to ground at the firewall?
Thanks
Will
William Daniell
+1 786 878 0246


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
user9253



Joined: 28 Mar 2008
Posts: 1907
Location: Riley TWP Michigan

PostPosted: Mon Dec 19, 2022 9:28 am    Post subject: Re: Z 16 question Reply with quote

If you mean that you want to connect the over-voltage protection device to
the the other end of the same wire, then yes you can.
Another option is to connect the over-voltage protection device to the
downstream side of the 5 amp alternator breaker.


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Joe Gores
Back to top
View user's profile Send private message
wdaniell.longport(at)gmai
Guest





PostPosted: Mon Dec 19, 2022 11:30 am    Post subject: Z 16 question Reply with quote

Joe
Much appreciated
Thanks
Will

On Mon, Dec 19, 2022, 12:33 user9253 <fransew(at)gmail.com (fransew(at)gmail.com)> wrote:

Quote:
--> AeroElectric-List message posted by: "user9253" <fransew(at)gmail.com (fransew(at)gmail.com)>

If you mean that you want to connect the over-voltage protection device to
the the other end of the same wire, then yes you can.
Another option is to connect the over-voltage protection device to the
downstream side of the 5 amp alternator breaker.

--------
Joe Gores




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=509726#509726






===========
-
Electric-List" rel="noreferrer noreferrer noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
===========
FORUMS -
eferrer noreferrer noreferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer noreferrer noreferrer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
="noreferrer noreferrer noreferrer" target="_blank">https://matronics.com/contribution
===========




William Daniell
+1 786 878 0246


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
nuckolls.bob(at)aeroelect
Guest





PostPosted: Mon Dec 19, 2022 1:42 pm    Post subject: Z 16 question Reply with quote

At 07:18 PM 12/18/2022, you wrote:
Quote:
I am refitting my old voltage regulator after a failure of the bandc one I installed a year ago.  The bandc has built in ovp. I am assuming that this is a manufacturing defect ...i had a very early version.

I have ordered a new one.

Take a look at the B&C current offering for
PM rectifier/regulators at:

https://tinyurl.com/2lr4u6o6

The old regulators (including the last Rotax I saw)
are 3 decades old technology.

The AVC1 R/R has ov protection plus alternator control
relay built in. Everything in one box and 30 years
'younger'.


Quote:
Meantime i am refitting a rotax regulator and I am also refitting my old ovp/relay

The z 16 shows the ovp from master to ground at the panel.

Could I install the ovp at the relay end to ground at the firewall?

Yes






Bob . . .

Un impeachable logic: George Carlin asked, "If black boxes
survive crashes, why don't they make the whole airplane
out of that stuff?"


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
wdaniell.longport(at)gmai
Guest





PostPosted: Tue Dec 20, 2022 5:23 pm    Post subject: Z 16 question Reply with quote

Bob
thanks.
Rotax regulator fitted with old style OVP at the relay end...everything stable and radio noise gone.
I am sending the AVC1 to bandc
Will
William Daniell

LONGPORT

+1 786 878 0246
On Mon, Dec 19, 2022 at 4:46 PM Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:

Quote:
At 07:18 PM 12/18/2022, you wrote:
Quote:
I am refitting my old voltage regulator after a failure of the bandc one I installed a year ago.   The bandc has built in ovp.  I am assuming that this is a manufacturing defect ...i had a very early version.

I have ordered a new one.

  Take a look at the B&C current offering for
  PM rectifier/regulators at:

https://tinyurl.com/2lr4u6o6

  The old regulators (including the last Rotax I saw)
  are 3 decades old technology.

  The AVC1 R/R has ov protection plus alternator control
  relay built in. Everything in one box and 30 years
  'younger'.


Quote:
Meantime i am refitting a rotax regulator and I am also refitting my old ovp/relay

The z 16 shows the ovp from master to ground at the panel.

Could I install the ovp at the relay end to ground at the firewall?

  Yes






  Bob . . .

  Un impeachable logic: George Carlin asked, "If black boxes
  survive crashes, why don't they make the whole airplane
  out of that stuff?"



- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group