Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Wiring

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

DAVELEIKAM(at)wi.rr.com
Guest

Posted: Fri Feb 23, 2007 10:59 am Post subject: Wiring

Has anyone purchased or do you recommend purchasing  the wiring kit from Stein?

  

  

  

 Dave Leikam

 40496

  

  

   [quote][b]

jesse(at)saintaviation.co
Guest

Posted: Fri Feb 23, 2007 3:53 pm Post subject: Wiring

I have looked at it, and have probably purchased the equivalent a couple of times, but not the specific kit.  If you are planning on using the fuse blocks, need the tools, and stuff like that, then it would be a good way to go.  I would look through it and decide if you need all of the components, then ask him to hold any out that you don’t plan to use.  After all, it is just a list of supplies, not an actual harness.  You may need less of some wires and probably more of others when you get down to it, but it is a good place to start, IMHO.  

   

Do not archive  

     

Jesse Saint  

Saint Aviation, Inc.  

jesse(at)saintaviation.com (jesse(at)saintaviation.com)  

www.saintaviation.com  

Cell: 352-427-0285  

Fax: 815-377-3694  

          

  

  

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Dave Leikam

 Sent: Friday, February 23, 2007 1:59 PM

 To: matronics

 Subject: Wiring  

  

     

Has anyone purchased or do you recommend purchasing the wiring kit from Stein?  

    

   

    

   

    

   

    

Dave Leikam  

    

40496  

    

   

    

   

  [quote]   [b]

AV8ORJWC

Joined: 13 Jul 2006
Posts: 1149
Location: Aurora, Oregon "Home of VANS"

Posted: Fri Feb 23, 2007 4:28 pm Post subject: Wiring

I will recommend Stein.  I have been told he is a great guy, reputable businessman and can use all the positive cashflow we can forward him as a result of being victimized by the D2A fiasco.  Tim gives a hearty endorsement and that is enough for me.  

     

John Cox 

 #40600   

        

  

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Dave Leikam

 Sent: Friday, February 23, 2007 10:59 AM

 To: matronics

 Subject: Wiring  

  

     

Has anyone purchased or do you recommend purchasing the wiring kit from Stein?  

    

   

    

   

    

   

    

Dave Leikam  

    

40496  

    

   

    

   

  [quote]   [b]

LloydDR(at)wernerco.com
Guest

Posted: Fri Feb 23, 2007 7:13 pm Post subject: Wiring

I have  been working with Stein for over a year now, and I can say without a doubt he is  an honest and forthright vendor, which in this day and age is a rarity. I have  been one of the ones bit by the Direct2 fiasco, and Stein has been a pleasure to  deal with during a difficult time. He has been in the middle of a bad situation,  and has done everything in his power to make it right. For a small shop that is  saying allot, Lancair customers got the shaft and Steins customers got taken  care of. 

 I  would recommend Stein and his group to anyone needing his  services.

 Dan  Lloyd

 N289DT

 [quote]   

   --

jhstarn(at)verizon.net
Guest

Posted: Fri Feb 23, 2007 7:33 pm Post subject: Wiring

He's also a great source for 1963 VW pickup wiring etc.    KABONG  8*)

 Do Not Archive

   [quote][b]

jwt(at)roadmapscoaching.c
Guest

Posted: Fri Feb 23, 2007 7:37 pm Post subject: Wiring

I would definitely go  with Stein for all of your electrical system parts and support. They really know  their stuff and are the BEST at supporting customers. Stein is my first choice  for all electrical stuff - I love em!

  

  John Testement

jwt(at)roadmapscoaching.com (jwt(at)roadmapscoaching.com)

40321

 Richmond, VA

FWF, engine, wiring

 do not archive

   From: owner-rv10-list-server(at)matronics.com  [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Dave  Leikam

Sent: Friday, February 23, 2007 1:59 PM

To:  matronics

Subject: Wiring

 

 Has anyone purchased or do you recommend purchasing  the wiring kit from Stein?

  

  

  

 Dave Leikam

 40496

  

  

 	  Quote: 	
		  



href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List

href="http://forums.matronics.com">http://forums.matronics.com



	
-- No virus found in this  Edition.   

  

--

 2/23/2007 4:39 AM

     [quote][b]

DAVELEIKAM(at)wi.rr.com
Guest

Posted: Fri Feb 23, 2007 8:47 pm Post subject: Wiring

I talked with Stein today and will probably order  his wire kit for starters.  He seems like a great guy and very  knowledgeable.  I think he may end up doing my panel, G900x.   

  

 Oh honey, we need to talk about the airplane money  again!

  

 Dave Leikam

 40496

  

 do not archive

 [quote]   ---

ddddsp1(at)juno.com
Guest

Posted: Fri Feb 23, 2007 10:16 pm Post subject: Wiring

STEIN all the way!!!!!        He is an awesome guy to work with.   BTW Stein,  my dimmer had a short in it and the ICOM does not have DIMMER capability anyway.  I hooked them all direct to power and they worked great! 

  

DEAN 40449 

YUGO Avionics working great! 



________________________________________________________________________

 FREE Reminder Service - NEW from AmericanGreetings.com

 Click HERE and never forget a Birthday or Anniversary again!

    [quote][b]

jhstarn(at)verizon.net
Guest

Posted: Fri Feb 23, 2007 10:46 pm Post subject: Wiring

OH NO....Please, I feel a YUGO joke coming on....  KABONG  Do Not  Archive

 [quote]   

    

DEAN 40449   

YUGO Avionics working great![b]

dc71(at)netspace.net.au
Guest

Posted: Sun Feb 25, 2007 3:27 am Post subject: Wiring

Dan, how did Lancair customers get the shaft? The deal  I was given after the D2A fiasco seemed reasonable : $1400 for a Xbow, and $2600  for a pinpoint, along with $1400 credit at Aerocraft parts. This equates to a  "free" Crossbow, if you were going to buy the parts anyway.

  

 Indran

 40228



   From: owner-rv10-list-server(at)matronics.com  [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Lloyd, Daniel  R.

Sent: Saturday, 24 February 2007 12:13 PM

To:  rv10-list(at)matronics.com

Subject: RE: RV10-List:  Wiring

 

  ... Lancair  customers got the shaft and  ...

  Dan  Lloyd

 N289DT

 [quote]   

    

[b]

LloydDR(at)wernerco.com
Guest

Posted: Sun Feb 25, 2007 6:53 pm Post subject: Wiring

$1400  in credit at full retail prices equates to more money in his pocket and less in  his customers. An offer to make your customers whole does not include forcing  them to purchase additional items from you at retail....My .02 of  course.

 Dan

 [quote]   

   --

LloydDR(at)wernerco.com
Guest

Posted: Sun Feb 25, 2007 7:14 pm Post subject: Wiring

In  addition to my other comments, you paid for a working system, does it seem right  to you that your vendor, who took your money, offers to split the cost with you?  Kind of strange in my book. The point being is that I was giving a reference for  Stein, who made his customers whole by delivering the system that they ordered  and paid for. He did not make us split it with him and get a credit to use at a  later date at full retail pricing.

 Dan

 [quote]   

   --

wvu(at)ameritel.net
Guest

Posted: Sun Feb 25, 2007 7:51 pm Post subject: Wiring

I think this is called the art of being lawyer.  He can boink you  in the rear end and you thank him when he's done with you!

 Anh

 [quote]   ---

dc71(at)netspace.net.au
Guest

Posted: Mon Feb 26, 2007 5:59 am Post subject: Wiring

In that case, I wholeheartedly agree that Steinair have supported their 

customers better than lancair with respect to the D2A demise.



I'm still thinking that either way is far better than paying full retail for a 

Crossbow 425EX - approx $7000



Indran

Quoting "Lloyd, Daniel R." <LloydDR(at)wernerco.com>:



 	  Quote: 	
		   In addition to my other comments, you paid for a working system, does it

 seem right to you that your vendor, who took your money, offers to split

 the cost with you? Kind of strange in my book. The point being is that I

 was giving a reference for Stein, who made his customers whole by

 delivering the system that they ordered and paid for. He did not make us

 split it with him and get a credit to use at a later date at full retail

 pricing.

 Dan

 

do not archive
	


------------------------------------------------------------

This email was sent from Netspace Webmail: http://www.netspace.net.au

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum