Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

ELT and RJ11 cable.

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

indigoonlatigo(at)msn.com
Guest

Posted: Sat Mar 31, 2007 2:09 pm Post subject: ELT and RJ11 cable.

Is RJ 11 cable simply 4 wire telephone cord. Is it the stuff you can buy at 

Radio shack?



I need some right now and I rather not run down the hill for a one hour 

outing. I might just cut some off the thirty foot extension I already have 

that is being used to hook this computer up to the phone line. I'll replace 

the cable tonight before my wife even knows its gone. HONEY, What's wrong 

with the internet connection.



What, is it slower than usual??



JOhn G.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

LarryRosen

Joined: 16 Jan 2006
Posts: 415
Location: Medford, NJ

Posted: Sat Mar 31, 2007 3:40 pm Post subject: ELT and RJ11 cable.

Same stuff.



Don't even cut it leave the manufacture connectors so you don't have to 

replace them.



Larry



John Gonzalez wrote:

 	  Quote: 	
		   



 Is RJ 11 cable simply 4 wire telephone cord. Is it the stuff you can 

 buy at Radio shack?



 I need some right now and I rather not run down the hill for a one 

 hour outing. I might just cut some off the thirty foot extension I 

 already have that is being used to hook this computer up to the phone 

 line. I'll replace the cable tonight before my wife even knows its 

 gone. HONEY, What's wrong with the internet connection.



 What, is it slower than usual??



 JOhn G.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Larry Rosen
#40356
N205EN (reserved)
<http>

Tim Olson

Joined: 25 Jan 2007
Posts: 2882

Posted: Sat Mar 31, 2007 3:46 pm Post subject: ELT and RJ11 cable.

Same cable John, but it's not pinned the same from what I understand.

I don't know the pinouts, but I think the cable is either rolled

or has a couple of crossed wires or something like that.  I think

I'd wait for the real deal if you can.



Tim



John Gonzalez wrote:

 	  Quote: 	
		   

 

 Is RJ 11 cable simply 4 wire telephone cord. Is it the stuff you can buy 

 at Radio shack?

 

 I need some right now and I rather not run down the hill for a one hour 

 outing. I might just cut some off the thirty foot extension I already 

 have that is being used to hook this computer up to the phone line. I'll 

 replace the cable tonight before my wife even knows its gone. HONEY, 

 What's wrong with the internet connection.

 

 What, is it slower than usual??

 

 JOhn G.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

kdbelue(at)charter.net
Guest

Posted: Sat Mar 31, 2007 3:54 pm Post subject: ELT and RJ11 cable.

John,



In my experience, the wire is telephone wire, but the pinout is different. I 

have an Ameri-king AK-450 and a telephone cord would not work as-is. I had 

to cut off one connector and wire it differently - sorry, don't remember the 

pinout (6 years ago).

---

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

rvbuilder(at)sausen.net
Guest

Posted: Sat Mar 31, 2007 3:56 pm Post subject: ELT and RJ11 cable.

Yes



Do not archive



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

jesse(at)saintaviation.co
Guest

Posted: Sat Mar 31, 2007 4:27 pm Post subject: ELT and RJ11 cable.

I think you should be fine.  Verify that the wires are the same or opposite

on both ends, then go ahead.  I think, since it is flat cable, that the

wires are in the same order, so the question is the orientation of the ends.

You can see the colors, so that's fine.  If you are going to run the wire

and don't want the whole length, just cut one end off (keep it so you can

verify the wire order later) and run the wire, then you can get another end

and borrow a crimper to put the new end on when you are ready for it.



Do not archive



Jesse Saint

Saint Aviation, Inc.

jesse(at)saintaviation.com

www.saintaviation.com

Cell: 352-427-0285

Fax: 815-377-3694



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

LarryRosen

Joined: 16 Jan 2006
Posts: 415
Location: Medford, NJ

Posted: Sat Mar 31, 2007 4:42 pm Post subject: ELT and RJ11 cable.

I gave you bad information.



 From the Ameri-King AK-450 installation manual



Note:  The interconnecting wiring is a straight wiring configuration, 

I.e. Pin 1 to 1, Pin 2 to 2,  Pin 3 to 3, Pin 4 to 4.

......

The wiring configuration is not a telephone application.  (Telephone 

application is a cross wire configuration, i.e. Pin 1 to 4, Pin 2 to 3, 

Pin 4 to 1)  To convert from cross wire to straight wire configuration, 

just simply reverse either plug upside down.



Larry



Larry Rosen wrote:

 	  Quote: 	
		   



 Same stuff.



 Don't even cut it leave the manufacture connectors so you don't have 

 to replace them.



 Larry



 John Gonzalez wrote:

> 

> <indigoonlatigo(at)msn.com>

>

> Is RJ 11 cable simply 4 wire telephone cord. Is it the stuff you can 

> buy at Radio shack?

>

> I need some right now and I rather not run down the hill for a one 

> hour outing. I might just cut some off the thirty foot extension I 

> already have that is being used to hook this computer up to the phone 

> line. I'll replace the cable tonight before my wife even knows its 

> gone. HONEY, What's wrong with the internet connection.

>

> What, is it slower than usual??

>

> JOhn G.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Larry Rosen
#40356
N205EN (reserved)
<http>

indigoonlatigo(at)msn.com
Guest

Posted: Sat Mar 31, 2007 5:18 pm Post subject: ELT and RJ11 cable.

Thank you all for the information.

 	  Quote: 	
		  From what I learned, Telephone application is 1-1,2-2,3-3,4-4. Networking 

apllication is as you say Larry, 1-4, all others the same.

I need to cut one end off anyway. I forgot to run this wire and it is the 

last one to go in, I have no more room inside the conduits. I got both the 

solenoid wires in as I had forgotten them also. Remember dual Batts.

Thanks all for the speedy replies.

JOhn G. Do NOt Archive

 	  Quote: 	
		  From: Larry Rosen <LarryRosen(at)comcast.net>

Reply-To: rv10-list(at)matronics.com

To: rv10-list(at)matronics.com

Subject: Re: ELT and RJ11 cable.

Date: Sat, 31 Mar 2007 20:38:35 -0400

I gave you bad information.

From the Ameri-King AK-450 installation manual

Note:  The interconnecting wiring is a straight wiring configuration, I.e. 

Pin 1 to 1, Pin 2 to 2,  Pin 3 to 3, Pin 4 to 4.

.......

The wiring configuration is not a telephone application.  (Telephone 

application is a cross wire configuration, i.e. Pin 1 to 4, Pin 2 to 3, Pin 

4 to 1)  To convert from cross wire to straight wire configuration, just 

simply reverse either plug upside down.

Larry

Larry Rosen wrote:

>

>

>Same stuff.

>

>Don't even cut it leave the manufacture connectors so you don't have to 

>replace them.

>

>Larry

>

>John Gonzalez wrote:

>>

>>

>>Is RJ 11 cable simply 4 wire telephone cord. Is it the stuff you can buy 

>>at Radio shack?

>>

>>I need some right now and I rather not run down the hill for a one hour 

>>outing. I might just cut some off the thirty foot extension I already 

>>have that is being used to hook this computer up to the phone line. I'll 

>>replace the cable tonight before my wife even knows its gone. HONEY, 

>>What's wrong with the internet connection.

>>

>>What, is it slower than usual??

>>

>>JOhn G.

>>

>>

>>

>>

>>

>>

>>

>>

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum