Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Sternpost joggle

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

rparigor(at)suffolk.lib.n
Guest

Posted: Fri Jun 08, 2007 5:07 pm Post subject: Sternpost joggle

My XS sternpost has a horizontal joggle bout 6" from the top right bout

where the top rudder hinge wants to live (perhaps clearance for the top

cap joggle? Cap not in hangar). 



Anyway the 3 rudder hinges need to be on the same plain.



What have builders done to deal with this top joggle not allowing the top

rudder hinge from laying flat and forcing it inboard compared to the

others (by bout little over an 1/8"?



Thx.

Ron Parigoris

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

keithhickling(at)clear.ne
Guest

Posted: Sat Jun 09, 2007 2:38 am Post subject: Sternpost joggle

Ron, here is the reply I got from Nev in response to a question about the 

bottom fin rib which was too long at the front,  and the sternpost joggle:



  Hi Keith, you have sussed that out just fine, the Manual / drawings are 

not correct. Trim the front of the bottom rib off, probably as much as 1'', 

so it fits up against the bulkhead. With all three of the ribs,don't  try to 

get to the exact dimensions, put them where they fit best.

Put a 3 ply Bid bracket from the top of the bottom rib onto the bulkhead, 

1'' overlap.

With the sternpost, clamp it up with 4 pieces of 1'' angle iron, remove the 

jogle from the sternpost at the top [ grind it away ], and where the top 

hinge will go later, do a 3 Bid lay up over the area.

Glad to hear the wing skin went on OK, one of the key jobs, you will sleep 

easier knowing it is on properly.

Cheers,

Nev.

---

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

SteveD

Joined: 09 Jan 2006
Posts: 50

Posted: Sat Jun 09, 2007 5:45 am Post subject: Sternpost joggle

Hi Ron,

I just cut the bumps out, and filled them in.

Used a couple pieces of Kevlar in the hinge area. I don't recommend  

using kevlar, it's very hard to work with.

I used it because I ordered some by mistake and I'm trying to use it  

up. Someday I'll show you my indestructible

battery box. :  )



Steved



<pre><b><font size  color="#000000" face="courier new,courier">

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

stern1.jpg

Description:

Filesize:

78.72 KB

Viewed:

204 Time(s)

stern2.jpg

Description:

Filesize:

40.36 KB

Viewed:

202 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum