Matronics Email Lists :: View topic - Firewall Forward heads up

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Firewall Forward heads up

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

dlm46007(at)cox.net
Guest

Posted: Sat Jul 14, 2007 10:48 am Post subject: Firewall Forward heads up

If you are using the IO540 and the quadrant, be advised to adjust the cables

at the throttle quadrant end for maximum length. Also note that when using

the inverted V pattern through the firewall you will be crossing the

throttle and mixture cables as the throttle is right side and the mixture is

left side forward of the firewall. This works to effectively shorten the

cables. It appears that in my case the cables can be effectively lengthened

by about 1 inch but will require about 2 extra hours of labor to remove them

enough to work on the length.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

hotwheels

Joined: 01 Jun 2007
Posts: 240

Posted: Mon Jul 16, 2007 11:48 am Post subject: Firewall Forward heads up

Does anyone have photos of firewall penetration holes required for the

quadrant?



Thanks,

Jay

Time: 	11:48:13 AM PST US

From: 	"David McNeill" <dlm46007(at)cox.net>

Subject: 	Firewall Forward heads up

      

      

      If you are using the IO540 and the quadrant, be advised to adjust the

cables

      at the throttle quadrant end for maximum length. Also note that when

using

      the inverted V pattern through the firewall you will be crossing the

      throttle and mixture cables as the throttle is right side and the mixture

is

      left side forward of the firewall. This works to effectively shorten the

      cables. It appears that in my case the cables can be effectively

lengthened

      by about 1 inch but will require about 2 extra hours of labor to remove

them

      enough to work on the length.

      

 

Sucker-punch spam with award-winning protection. 

Try the free Yahoo! Mail Beta.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum