 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
John Ackerman
Joined: 19 Jun 2006
Posts: 130
Location: Prescott, AZ
|
 Posted: Fri Mar 21, 2008 12:00 pm Post subject: Blatant commercial message - DRDT-2 for sale |
 |
|
Marlys and I have a DRDT-2 dimpler that we really like. We're all done dimpling large sheet metal pieces now, though, and are not likely to build another airplane, so it's for sale.
This particular DRDT-2 was featured in the October 2006 issue of Kitplanes. It's in fine condition - I'm not sure that one RV10 is enough to break it in. 
Sale would include a carpeted support table per Paul's plans if you want to pay the shipping rather than make one (it's bulky), and the paperwork it came with (plans, instructions).
New price is $350 from Experimental Aero. Best acceptable offer by April 1 takes it; I will sell immediately for $250.
You pay actual shipping cost including insurance; I box it up at my cost and labor. $25 discount if you pick it up instead.
Payment via paypal, Cashier's check, money order , etc. Personal check is OK, but I will wait to ship until it clears. I'm not set up to take credit cards.
We're located in Prescott, AZ 86305. Phone is 928-759-9279. Email: is johnag5b(at)cableone.net (johnag5b(at)cableone.net).
If you want a new DRDT-2, Paul Merems of Experimental Aero 12351 E. Lou Bock Pl. Tucson, AZ 85749 stands out among a very good set of RV-10 vendors for his helpfulness and the quality of his stuff. His website is:
http://www.experimentalaero.com/DRDT-2.htm
and there's a good description of the dimpler there.
John Ackerman RV10 #40458
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
n212pj(at)gmail.com
Guest
|
| Posted: Fri Mar 21, 2008 1:15 pm Post subject: Blatant commercial message - DRDT-2 for sale |
|
|
I bought one of these and left it in the box for a few months, looking at it and wondering why I foolishly spent money when I had a perfectly good whack-a-mole painted a nice red sitting unobtrusively in the corner. Bruce Breckenridge, building a -10 right next door to me, would come over and sit in my comfy desk chair looking at it forlornly, especially when he was beginning his wings. I usually just ignored him. Then one day I took it out of the box and put it together. I used it on the elevator skins, invited Bruce over to have a look and a trial run, and am sad to say that the red one has not since left the corner. I've been in Buildus Interruptus for over a year, but Bruce hasn't. He's almost done with his wings and has reported that my DRDT-2 has performed quite well.
In short, buy John's, if you want to enjoy the riveting experience. You won't look back. You might have to find out where yours has wandered off to, if you have other builders in the area, but I'm afraid your lonely little red one in the corner will remain there. That's how good these things are. True, you can build a perfectly great plane without one, but, why? Sharing is optional, but highly advisable.
John Jessen
40328
[quote] From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of John Ackerman
Sent: Friday, March 21, 2008 12:57 PM
To: rv10-list(at)matronics.com
Subject: Blatant commercial message - DRDT-2 for sale
Marlys and I have a DRDT-2 dimpler that we really like. We're all done dimpling large sheet metal pieces now, though, and are not likely to build another airplane, so it's for sale.
This particular DRDT-2 was featured in the October 2006 issue of Kitplanes. It's in fine condition - I'm not sure that one RV10 is enough to break it in.
Sale would include a carpeted support table per Paul's plans if you want to pay the shipping rather than make one (it's bulky), and the paperwork it came with (plans, instructions).
New price is $350 from Experimental Aero. Best acceptable offer by April 1 takes it; I will sell immediately for $250.
You pay actual shipping cost including insurance; I box it up at my cost and labor. $25 discount if you pick it up instead.
Payment via paypal, Cashier's check, money order , etc. Personal check is OK, but I will wait to ship until it clears. I'm not set up to take credit cards.
We're located in Prescott, AZ 86305. Phone is 928-759-9279. Email: is johnag5b(at)cableone.net (johnag5b(at)cableone.net).
If you want a new DRDT-2, Paul Merems of Experimental Aero 12351 E. Lou Bock Pl. Tucson, AZ 85749 stands out among a very good set of RV-10 vendors for his helpfulness and the quality of his stuff. His website is:
http://www.experimentalaero.com/DRDT-2.htm
and there's a good description of the dimpler there.
John Ackerman RV10 #40458
| Quote: |
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
|
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
