Matronics Email Lists :: View topic - Access under front seats

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Access under front seats

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

ron.mcgann(at)baesystems.
Guest

Posted: Wed Dec 03, 2008 2:30 pm Post subject: Access under front seats

G'day all,   

Painting is finished, so I am in the process of final tidy up in the cabin.  I really just need to finish wiring the sticks and install the seats.  I have a terminal block located under the front seats to connect the stick wiring to.  Can someone please advise what access is available to the under seat area once the seats are installed?  Eg do the seats slide all the way back to provide access to the under seat area, or do you need to remove the seats completely to gain access to the area under the seat pans?    

Thanks in advance  

Ron  

-187 maybe the BEST Xmas present ever???   [quote]"Warning:

The information contained in this email and any attached files is

confidential to BAE Systems Australia. If you are not the intended

recipient, any use, disclosure or copying of this email or any

attachments is expressly prohibited.  If you have received this email

in error, please notify us immediately. VIRUS: Every care has been

taken to ensure this email and its attachments are virus free,

however, any loss or damage incurred in using this email is not the

sender's responsibility.  It is your responsibility to ensure virus

checks are completed before installing any data sent in this email to

your computer."



[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

drfred(at)suddenlinkmail.
Guest

Posted: Wed Dec 03, 2008 2:56 pm Post subject: Access under front seats

Ron;



I've had to take the flap cover off before I could try to remove the 

seats.  Haven't tried to get to the back screws of the cover plate yet 

with the seat in place.  You might be able to slide the seats back and 

forth to get to the individual screws and then get access.  Either way, 

it only takes a couple minutes to pull the flap cover screws to get the 

seat out of your way.  You can go ahead and install the seat rails 

without any problem. 



Hope this helps.



Dr Fred.

McGANN, Ron wrote:

 	  Quote: 	
		  

 G'day all,



 Painting is finished, so I am in the process of final tidy up in the 

 cabin.  I really just need to finish wiring the sticks and install the 

 seats.  I have a terminal block located under the front seats to 

 connect the stick wiring to.  Can someone please advise what access is 

 available to the under seat area once the seats are installed?  Eg do 

 the seats slide all the way back to provide access to the under seat 

 area, or do you need to remove the seats completely to gain access to 

 the area under the seat pans? 



 Thanks in advance

 Ron

 -187 maybe the BEST Xmas present ever???



 "Warning:

 The information contained in this email and any attached files is

 confidential to BAE Systems Australia. If you are not the intended

 recipient, any use, disclosure or copying of this email or any

 attachments is expressly prohibited.  If you have received this email

 in error, please notify us immediately. VIRUS: Every care has been

 taken to ensure this email and its attachments are virus free,

 however, any loss or damage incurred in using this email is not the

 sender's responsibility.  It is your responsibility to ensure virus

 checks are completed before installing any data sent in this email to

 your computer."



   

 *



 *

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

bcondrey

Joined: 03 Apr 2006
Posts: 580

Posted: Wed Dec 03, 2008 3:04 pm Post subject: Access under front seats

Another technique is to cut down the front part of the nylon (or

whatever material it is) slides by about 3/4".  This then allows the

seats to be tilted up and will clear the flap tube covers.



Bob

N442PM



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

avu1(at)md.metrocast.net
Guest

Posted: Wed Dec 03, 2008 6:04 pm Post subject: Access under front seats

You can't slide the seats back far enough without taking the side handles

off.  Once those handles come off you might as well take the seats off.

Anh

N591VU-flying



 	  Quote: 	
		   G'day all,



 Painting is finished, so I am in the process of final tidy up in the

 cabin.  I really just need to finish wiring the sticks and install the

 seats.  I have a terminal block located under the front seats to connect

 the stick wiring to.  Can someone please advise what access is available

 to the under seat area once the seats are installed?  Eg do the seats

 slide all the way back to provide access to the under seat area, or do

 you need to remove the seats completely to gain access to the area under

 the seat pans?



 Thanks in advance

 Ron

 -187 maybe the BEST Xmas present ever???



 "Warning:

 The information contained in this email and any attached files is

 confidential to BAE Systems Australia. If you are not the intended

 recipient, any use, disclosure or copying of this email or any

 attachments is expressly prohibited.  If you have received this email

 in error, please notify us immediately. VIRUS: Every care has been

 taken to ensure this email and its attachments are virus free,

 however, any loss or damage incurred in using this email is not the

 sender's responsibility.  It is your responsibility to ensure virus

 checks are completed before installing any data sent in this email to

 your computer."

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum