Matronics Email Lists :: View topic - Feedback Request (Alternative Engines) Kitplanes Magazine

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Feedback Request (Alternative Engines) Kitplanes Magazine

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

bootless(at)earthlink.net
Guest

Posted: Sat Mar 25, 2006 3:12 pm Post subject: Feedback Request (Alternative Engines) Kitplanes Magazine

Hello all, 

 

 I would like to hear from you if you're a builder who has successfully installed and flown an alternative engine in your plane. I'm compiling a builder's roundup for Kitplanes magazine, and am looking for an installation that's flown for a minimum of 300 hours, and is currently flying. 

 

 For the builders that we profile, the magazine will also be able to pay you $100 for the write-up. I'll be at Sun 'n Fun until late morning on Friday (April 7), so if you fly in, I'd be happy to take the photos there. If not, we would also need at least 2-3 good photos, including a close-up of the engine and an overall shot of the aircraft. Additional photos would be great, and all photos will be returned. If you have digital photos, it is very important that they be high-resolution, at least 300 dpi. I have a list of specific areas to address if you'd like to participate, but we can handle that off-line. Please feel free to contact me off-line at: bootless (at) earthlink (dot) net (my despammed email address). 

 

 Thank you so much! 

 

 best, 

 Cory Emberson 

 Contributing Editor 

 Kitplanes Magazine 

 

 

  	  Quote:

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

LarryRosen

Joined: 16 Jan 2006
Posts: 415
Location: Medford, NJ

Posted: Sat Mar 25, 2006 3:33 pm Post subject: Feedback Request (Alternative Engines) Kitplanes Magazine

I think all the flying customer built RV-10 are using IO-540.  The only 

variation you will get are 2 blade metal vs 3 blade composite props.  

Some Subies and rotaries in the building stages.



Cory Emberson wrote:



 	  Quote: 	
		   Hello all,



 I would like to hear from you if you're a builder who has successfully 

 installed and flown an alternative engine in your plane. I'm compiling 

 a builder's roundup for Kitplanes magazine, and am looking for an 

 installation that's flown for a minimum of 300 hours, and is currently 

 flying.



 For the builders that we profile, the magazine will also be able to 

 pay you $100 for the write-up. I'll be at Sun 'n Fun until late 

 morning on Friday (April 7), so if you fly in, I'd be happy to take 

 the photos there. If not, we would also need at least 2-3 good photos, 

 including a close-up of the engine and an overall shot of the 

 aircraft. Additional photos would be great, and all photos will be 

 returned. If you have digital photos, it is very important that they 

 be high-resolution, at least 300 dpi. I have a list of specific areas 

 to address if you'd like to participate, but we can handle that 

 off-line. Please feel free to contact me off-line at: bootless (at) 

 earthlink (dot) net (my despammed email address).



 Thank you so much!



 best,

 Cory Emberson

 Contributing Editor

 Kitplanes Magazine

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Larry Rosen
#40356
N205EN (reserved)
<http>

LloydDR(at)wernerco.com
Guest

Posted: Sat Mar 25, 2006 3:35 pm Post subject: Feedback Request (Alternative Engines) Kitplanes Magazine

Eggenfellner is delivering his first FWF packages for the  RV10 in the August time frame. To the best of my knowledge there is only one 10  flying with anything other than a Lycoming and that is the factory plane, if you  ask this same question near the end of the year or same time next year you will  get a better response from the 10 crowd. If you are looking for input from the  smaller plane crowd I would suggest you contact the yahoo list for  Eggenfellener, as he has many more flying this year than he did the last time  you asked.

 Dan 

 40269



   From: owner-rv10-list-server(at)matronics.com  [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Cory  Emberson

Sent: Saturday, March 25, 2006 6:12 PM

To:  rv10-list(at)matronics.com

Subject: Feedback Request  (Alternative Engines) Kitplanes Magazine

 

  Hello all, 



I would like  to hear from you if you're a builder who has successfully installed and flown an  alternative engine in your plane. I'm compiling a builder's roundup for  Kitplanes magazine, and am looking for an installation that's flown for a  minimum of 300 hours, and is currently flying. 



For the builders that we  profile, the magazine will also be able to pay you $100 for the write-up. I'll  be at Sun 'n Fun until late morning on Friday (April 7), so if you fly in, I'd  be happy to take the photos there. If not, we would also need at least 2-3 good  photos, including a close-up of the engine and an overall shot of the aircraft.  Additional photos would be great, and all photos will be returned. If you have  digital photos, it is very important that they be high-resolution, at least 300  dpi. I have a list of specific areas to address if you'd like to participate,  but we can handle that off-line. Please feel free to contact me off-line at:  bootless (at) earthlink (dot) net (my despammed email address). 



Thank  you so much! 



best, 

Cory Emberson 

Contributing Editor  

Kitplanes Magazine 

  	  Quote:

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

bootless(at)earthlink.net
Guest

Posted: Sat Mar 25, 2006 3:43 pm Post subject: Feedback Request (Alternative Engines) Kitplanes Magazine

Thanks, Larry.



I kind of thought so, but that one odd plane that's been flying its tail 

off could always be out there. 



I appreciate the info.



best, Cory



Do Not Archive



Larry Rosen wrote:



 	  Quote: 	
		   



 I think all the flying customer built RV-10 are using IO-540.  The 

 only variation you will get are 2 blade metal vs 3 blade composite 

 props.  Some Subies and rotaries in the building stages.



 Cory Emberson wrote:



> Hello all,

>

> I would like to hear from you if you're a builder who has 

> successfully installed and flown an alternative engine in your plane. 

> I'm compiling a builder's roundup for Kitplanes magazine, and am 

> looking for an installation that's flown for a minimum of 300 hours, 

> and is currently flying.

>

> For the builders that we profile, the magazine will also be able to 

> pay you $100 for the write-up. I'll be at Sun 'n Fun until late 

> morning on Friday (April 7), so if you fly in, I'd be happy to take 

> the photos there. If not, we would also need at least 2-3 good 

> photos, including a close-up of the engine and an overall shot of the 

> aircraft. Additional photos would be great, and all photos will be 

> returned. If you have digital photos, it is very important that they 

> be high-resolution, at least 300 dpi. I have a list of specific areas 

> to address if you'd like to participate, but we can handle that 

> off-line. Please feel free to contact me off-line at: bootless (at) 

> earthlink (dot) net (my despammed email address).

>

> Thank you so much!

>

> best,

> Cory Emberson

> Contributing Editor

> Kitplanes Magazine

>



 http://www.matronics.com/Navigator?RV10-List

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

bootless(at)earthlink.net
Guest

Posted: Sat Mar 25, 2006 3:46 pm Post subject: Feedback Request (Alternative Engines) Kitplanes Magazine

Thanks, Dan.

 

 I will be checking out the Eggenfellner site as well - I've been subscribed there for a while. The magazine revisits these builder roundups from time to time, so I expect that the next time around will be ripe for the 10s.

 

 best, Cory

 Do Not Archive

 

 Lloyd, Daniel R. wrote:

  	  Quote: 	
		              Eggenfellner is delivering his first FWF packages for the RV10 in the August time frame. To the best of my knowledge there is only one 10 flying with anything other than a Lycoming and that is the factory plane, if you ask this same question near the end of the year or same time next year you will get a better response from the 10 crowd. If you are looking for input from the smaller plane crowd I would suggest you contact the yahoo list for Eggenfellener, as he has many more flying this year than he did the last time you asked.

   Dan 

   40269

   

      From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Cory Emberson

   Sent: Saturday, March 25, 2006 6:12 PM

   To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

   Subject: Feedback Request (Alternative Engines) Kitplanes Magazine

   

   

      Hello all, 

   

 I would like to hear from you if you're a builder who has successfully installed and flown an alternative engine in your plane. I'm compiling a builder's roundup for Kitplanes magazine, and am looking for an installation that's flown for a minimum of 300 hours, and is currently flying. 

   

 For the builders that we profile, the magazine will also be able to pay you $100 for the write-up. I'll be at Sun 'n Fun until late morning on Friday (April 7), so if you fly in, I'd be happy to take the photos there. If not, we would also need at least 2-3 good photos, including a close-up of the engine and an overall shot of the aircraft. Additional photos would be great, and all photos will be returned. If you have digital photos, it is very important that they be high-resolution, at least 300 dpi. I have a list of specific areas to address if you'd like to participate, but we can handle that off-line. Please feel free to contact me off-line at: bootless (at) earthlink (dot) net (my despammed email address). 

   

 Thank you so much! 

   

 best, 

 Cory Emberson 

 Contributing Editor 

 Kitplanes Magazine

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum