|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
wboyter(at)q.com Guest
|
Posted: Thu Mar 05, 2009 5:39 am Post subject: rods |
|
|
Good Morning
I'm building lycoming O-230 E2A engine, when I disassembled the engine the number on the rods was facing the cam shaft. the book said to put he numbers towards the sump. The overhaul manual is a old 1979 edition any help wood be appreciate.
Thanks
Wayne
[quote][b]
| - The Matronics Engines-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Engines-List |
|
|
|
Back to top |
|
|
groups(at)bobcroweaircraf Guest
|
Posted: Thu Mar 05, 2009 6:05 am Post subject: rods |
|
|
Face all numbers forward and any writing in the pistons the correct way up.
From: owner-engines-list-server(at)matronics.com [mailto:owner-engines-list-server(at)matronics.com] On Behalf Of Wayne Boyter
Sent: 05 March 2009 13:38
To: engines-list(at)matronics.com
Subject: rods
Good Morning
I'm building lycoming O-230 E2A engine, when I disassembled the engine the number on the rods was facing the cam shaft. the book said to put he numbers towards the sump. The overhaul manual is a old 1979 edition any help wood be appreciate.
Thanks
Wayne
Quote: | http://www.matronics.com/Navigator?Engines-List | 0123456789
[quote][b]
| - The Matronics Engines-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Engines-List |
|
|
|
Back to top |
|
|
jimw_btg(at)earthlink.net Guest
|
Posted: Thu Mar 05, 2009 7:47 am Post subject: rods |
|
|
Wayne,
My Lycoming Overhaul Manual for 235 and 290-D page 34 section 8…. First….. “the cap must be assembled to the rod so that the numbers are adjacent to each other. In other words, the cap must not be assembled with its number on the opposite side from the number on the rod.”
Second…..“It is important, also to assemble the connecting rods to the crankshaft in such a manner that numbers stamped on the rods will be in the downward position when the engine is finally assembled.”
I also verified this with a Lyc tech sometime ago during an engine rebuild as well. Have a great time building. Take Care.
Jim Wickert
Tel 920-467-0219
Cell 920-912-1014
From: owner-engines-list-server(at)matronics.com [mailto:owner-engines-list-server(at)matronics.com] On Behalf Of Wayne Boyter
Sent: Thursday, March 05, 2009 7:38 AM
To: engines-list(at)matronics.com
Subject: rods
Good Morning
I'm building lycoming O-230 E2A engine, when I disassembled the engine the number on the rods was facing the cam shaft. the book said to put he numbers towards the sump. The overhaul manual is a old 1979 edition any help wood be appreciate.
Thanks
Wayne
Quote: | http://www.matronics.com/Navigator?Engines-List | 0123456789
[quote][b]
| - The Matronics Engines-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Engines-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|