  | 
				Matronics Email Lists Web Forum Interface to the Matronics Email Lists   
				 | 
			 
		 
		 
	
		| View previous topic :: View next topic   | 
	 
	
	
		| Author | 
		Message | 
	 
	
		donaho1(at)verizon.net Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Apr 05, 2009 9:34 am    Post subject: Harsh words about Rotax | 
				     | 
			 
			
				
  | 
			 
			
				Hi all, I don`t want to start a peeing match here, however, I have flown 
 with two different Rotax engines and had good luck with both of  them. I 
 have a 503 now that hasn`t given be any problems at all. Granted it only 
 has 60 hours on it but it has never skipped a beat. I put over 100 hours on 
 a used 377 (total hours around 250) and it never had a problem, except on 
 one flight when the diaphragm flapper in the fuel pump went bad. I don`t 
 blame that on the engine! I`m not saying they are bulletproof. Perhaps some 
 day I will have a different opinion. Would I fly a four stroke if I could? 
 Sure I would, but as of now I am happy with their two stroke 
 reliability.   Just wondering Herb, have you ever owned a Rotax. If so, 
 what happened that soured you on them? Lanny Fetterman  FSII N598LF
 
  |  | - The Matronics Kolb-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kolb-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		herbgh(at)nctc.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Apr 05, 2009 2:04 pm    Post subject: Harsh words about Rotax | 
				     | 
			 
			
				
  | 
			 
			
				Lanny
 
    Not soured...I flew a 532 on my Kolb MkIII some years ago...no 
 problems...currently fly a 447 on my Firefly..no problems.. 
 
     I think that Hirth is getting a bad rap...that is all...Herb
 At 12:33 PM 4/5/2009, you wrote:
  	  | Quote: | 	 		  
 
 Hi all, I don`t want to start a peeing match here, however, I have 
 flown with two different Rotax engines and had good luck with both 
 of  them. I have a 503 now that hasn`t given be any problems at all. 
 Granted it only has 60 hours on it but it has never skipped a beat. 
 I put over 100 hours on a used 377 (total hours around 250) and it 
 never had a problem, except on one flight when the diaphragm flapper 
 in the fuel pump went bad. I don`t blame that on the engine! I`m not 
 saying they are bulletproof. Perhaps some day I will have a 
 different opinion. Would I fly a four stroke if I could? Sure I 
 would, but as of now I am happy with their two stroke 
 reliability.   Just wondering Herb, have you ever owned a Rotax. If 
 so, what happened that soured you on them? Lanny Fetterman  FSII N598LF
 
 | 	 
 
 
  |  | - The Matronics Kolb-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kolb-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Blumax008(at)aol.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Wed Apr 08, 2009 5:59 am    Post subject: Harsh words about Rotax | 
				     | 
			 
			
				
  | 
			 
			
				In a message dated 4/5/2009 1:35:32 P.M. Eastern Daylight Time,  donaho1(at)verizon.net writes:
   	  | Quote: | 	 		  I    
 have a 503 now that hasn`t given be any problems at all. Granted it only    
 has 60 hours on it but it has never skipped a beat. I put over 100 hours    on 
 a used 377 (total hours around 250) and it never had a  problem | 	  
  
  My friend, if you own a Rotax 503 you are one very intelligent & lucky  fellow! That motor will give you years & years of worry-free, enjoyable  flying. Run that sucker wide open! It doesn't care a hoot! We tow hang gliders  here in NW Florida using the 503. Mine has over 1,600 hours on it now with  C-box, Pennzoil & Amoco Super Premium & still going strong. Will be  12 years old in September of this year. All with 3 tops. No major  overhauls.
   
  I'll leave you with my maxim for 503 owners...
   
  IF IT AIN'T BROKE...DON'T FIX IT.
   
  I've since added a new one...
   
  GET OFF THE INTERNET & GO FLY! (which reminds me, I gotta' go  fly!)
   
  Bill Catalina
  Ochlockonee Bay, Florida (on the coast south of  Tallahassee)
  Worried about job security? Check out the 5 safest jobs in a recession.
   [quote][b]
 
  |  | - The Matronics Kolb-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kolb-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		lucien
 
 
  Joined: 03 Jun 2007 Posts: 721 Location: santa fe, NM
  | 
		
			
				 Posted: Wed Apr 08, 2009 8:05 am    Post subject: Re: Harsh words about Rotax | 
				     | 
			 
			
				
  | 
			 
			
				FWIW,
 Regarding the 503, I'm still building up trust in my 912 in hopes it measures up to my 503's in terms of reliability  .
 
 But seriously, I've had more trouble with 4-strokes (not the 912) over the years than I've had with any of my 503's. They usually rot away long before they wear out or do something catastrophic.
 
 Even at 4 large, the 503 is still the best deal in an aviation engine available today.
 
 The only 2-stroke rotax I"m not too fond of is the 582. It's a little less durable than the aircooled motors. 
 
 And so far my 912 has been a good engine, but due to the far higher parts costs, I'm significantly more paranoid about something breaking in it. 
 
 I hope it holds together as well as my 2 447's and can't remember how many 503's..... (It is nice that the crank seals aren't leaking after a couple hundred hours tho).....
 
 LS
 
  |  | - The Matronics Kolb-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kolb-List |  
  |  
 
 
 
 
  _________________ LS
 
Titan II SS | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		John Hauck
 
  
  Joined: 09 Jan 2006 Posts: 4639 Location: Titus, Alabama (hauck's holler)
  | 
		
			
				 Posted: Wed Apr 08, 2009 8:36 am    Post subject: Harsh words about Rotax | 
				     | 
			 
			
				
  | 
			 
			
				> Regarding the 503, I'm still building up trust in my 912 in hopes it 
 measures up to my 503's in terms of reliability  .
 
 
 If you fly it enough, I bet you'll gain a little confidence in the 912.
 
 I've been extremely lucky to have had the opportunity to enjoy many hours, 
 over the last 25 years, in Kolb airplanes.  During that time, the first 
 eight years flying my own two strokes, and 15 years flying my own 912 
 engines.  In between crashes and rebuilds, I put significant time on Kolb 
 Factory two and four strokes, of which, I never had either type engine in a 
 factory airplane quit.
 
 With 2,660.00 hours of flying my own 912 series engines, I never had a 
 problem with the engine, although I have had a couple problems with the 
 pilot getting lazy and not checking fuel after topping off from unreliable 
 sources, 1994 and 1998.
 
 Based on the places my 912 engines have pushed me, I'd say I have quite a 
 bit of confidence in their reliability, and have also helped prove that 
 reliability.
 
 As far as high price of parts for 912 engines, aren't all engine parts 
 expensive now?  Also, I haven't had to buy parts for my 912 engines.  The 
 basic engine is close to bullet proof and do not wear out major parts. 
 Accessories, yes, they must be replaced, like spark plugs, oil filters, oil, 
 carb parts (probably weakest link of the 912), spark plug connectors, etc. 
 However, it takes a lot of flying to go through these parts like some of us 
 have done over the years.
 
 I think getting out there and grinding out hour after hour in a short period 
 of time, 232 hours in 41 total days for example, and many other high flying 
 hour, short number of day trips, is an excellent example of the 912 engine's 
 reliability.
 
 Don't think I'd bite off extremely long cross country flights, flying over 
 the inhospitible terrain, with a two stroke of any make.  In fact, there is 
 no way I would have made the 2004 flight to and in Alaska with one.  Not 
 that I do not like them, but I know the difference between two and four.
 
 As far as 4 strokes rotting away from non-use, I don't think so.  I have 
 antique tractors that are much older than me, that have sat and waited most 
 of their life, still running like the day they were built.     I might 
 add, my 912ULS has not seen much use since last summer, but it will get out 
 there and run like it should today, if the rats haven't eaten it since I 
 last checked.
 
 john h
 mkIII
 
  |  | - The Matronics Kolb-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kolb-List |  
  |  
 
 
 
 
  _________________ John Hauck
 
MKIII/912ULS
 
hauck's holler
 
Titus, Alabama | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		lucien
 
 
  Joined: 03 Jun 2007 Posts: 721 Location: santa fe, NM
  | 
		
			
				 Posted: Wed Apr 08, 2009 9:16 am    Post subject: Re: Harsh words about Rotax | 
				     | 
			 
			
				
  | 
			 
			
				 	  | John Hauck wrote: | 	 		  
 
 As far as high price of parts for 912 engines, aren't all engine parts 
 expensive now?  Also, I haven't had to buy parts for my 912 engines.  The 
 basic engine is close to bullet proof and do not wear out major parts. 
 Accessories, yes, they must be replaced, like spark plugs, oil filters, oil, 
 carb parts (probably weakest link of the 912), spark plug connectors, etc. 
 However, it takes a lot of flying to go through these parts like some of us 
 have done over the years.
 john h
 
 mkIII | 	  
 
 Actually, the value of the 912 overall is fixing to go up as the official TBO is being raised to 2000 hours, that according to Ronnie Smith IIRC. 
 
 And actually, for 100hp, with a 2000 hour TBO the 912ULS is probably going to be the highest bang/buck available in that power range if it isn't already.
 
 And that TBO is pessimistic from what I've heard of the engines in the field, particularly at flight schools, where they go for as long as 3000 hours. 
 
 I try to run mine up to operating temperature at least once every 2 weeks (and usually every week) to keep any possibility of corrosion away. Even if it's a trip around the pattern in the holes between the 40knot winds.....
 
 So far so good on mine at a little over 300 hours.....
 
 LS
 
  |  | - The Matronics Kolb-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?Kolb-List |  
  |  
 
 
 
 
  _________________ LS
 
Titan II SS | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		 | 
	 
 
  
	 
	    
	   | 
	
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
  | 
   
 
  
Powered by phpBB © 2001, 2005 phpBB Group
  
		 |