Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

ACM Possible Issues

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
richard.goode(at)russiana
Guest





PostPosted: Fri Mar 24, 2006 5:13 am    Post subject: ACM Possible Issues Reply with quote

Gus, the SP-91 is a strong aeroplane, but 60G - absolutely no way!
 
I know the two designers well (Slava Kondratiev and Sergey Esayan), and I can't believe either would have made that claim.
 
I would suspect that serious deformation would occur before 15G.  However more than enough for most people.
 
Sukhoi wings (carbon of course) are operational to 12G, with a 1.75 factor = 21G.  Six wings have been broken and the lowest figure one broke at was 25G.  (Of course the Massagee Su-31 wing was a production fault, but even then failed at 12.4G).
 
It is also worth saying that Sukhoi put all the wings that they subsequently broke through a 50,000 cycle of +10G and -10G, including torsional twisting.  I saw this in a rig the size of a small size house, and it was most impressive!
 
Richard Goode

Richard Goode Aerobatics
Rhodds Farm
Lyonshall
Herefordshire
HR5 3LW
United Kingdom
 
Tel:    +44 (0) 1544 340120
Mob:  +44 (0) 7768 610389
Fax:   +44 (0) 1544 340129
www.russianaeros.com


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
gus.fraser(at)gs.com
Guest





PostPosted: Fri Mar 24, 2006 6:00 am    Post subject: ACM Possible Issues Reply with quote

Sergey Esayan was the source for this I will ask him for the test data, lets see what he sends me. But basically the point of my post was that the Russian, better than anyone else period, actually test the aircraft that they sell.
 
Last summer I was looking around at alternative aerobatic types, and I have to say that I did (shame on me) consider the flat six variety as well). There are composite aircraft out there that claim ridiculous G loadings. BUT, when you ask to see the testing that was done to determine these figures the answer is always, oh we did not test the wing that is just a calculation. Well the fact of the matter is this, you may very well be able to determine with a great deal of accuracy that a wing may fail at a given load. I am not a structural engineer I don't know one end of a stress calculation from another. I do however understand big rigs and sand bags. I have a physics back ground and I always have problems with those theoretical guys, give me a particle accelerator any day of the week.
 
To fly an aircraft to these levels of performance you need to have 100% trust in the airframe otherwise you would never leave the ground. I really have difficulty in just "taking someone else's word" that things are going to be fine.
 
I think that there is a market for the Russians making these test facilities available to US manufactures, especially the experimental crowd, to test provided samples to the standard Russian criteria. If they did that I would take the limit claims more seriously. These results would be respected, especially by the aerobatics community, I mean who would doubt the strength of a Sukhoi ?
 
Gus

Quote:
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Richard Goode
Sent: Friday, March 24, 2006 8:13 AM
To: YAK USA LIST
Subject: ACM Possible Issues

Gus, the SP-91 is a strong aeroplane, but 60G - absolutely no way!
 
I know the two designers well (Slava Kondratiev and Sergey Esayan), and I can't believe either would have made that claim.
 
I would suspect that serious deformation would occur before 15G.  However more than enough for most people.
 
Sukhoi wings (carbon of course) are operational to 12G, with a 1.75 factor = 21G.  Six wings have been broken and the lowest figure one broke at was 25G.  (Of course the Massagee Su-31 wing was a production fault, but even then failed at 12.4G).
 
It is also worth saying that Sukhoi put all the wings that they subsequently broke through a 50,000 cycle of +10G and -10G, including torsional twisting.  I saw this in a rig the size of a small size house, and it was most impressive!
 
Richard Goode

Richard Goode Aerobatics
Rhodds Farm
Lyonshall
Herefordshire
HR5 3LW
United Kingdom
 
Tel:    +44 (0) 1544 340120
Mob:  +44 (0) 7768 610389
Fax:   +44 (0) 1544 340129
www.russianaeros.com

-----------------------------------------------------------------------------
This message has been scanned for viruses and
dangerous content by http://www.invictawiz.com
and is believed to be clean.
-----------------------------------------------------------------------------


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
aerobaticgirl(at)yahoo.co
Guest





PostPosted: Sat Apr 01, 2006 1:28 pm    Post subject: ACM possible issues Reply with quote

I am with you Brian, that is why I said what I said, seems to be so many people placing so many rules on these issues when the basic foundation of knowing where you are supposed to be when is the really important thing. I hear ya on doing whatever you want to in your own a/c but in formation...you can come over and swap paint with me anytime you feel like it, ya know what I mean?
 
I just felt like putting in my two cents to focus on what is important that is all.  Sorry.  I am just really safety conscience and at times on this list it seems that there is an occasional lackadaisical attitude toward activities that are inherently dangerous and it has worried me.
 
Smash


Brian Lloyd <brian-yak(at)lloyd.com> wrote:
Quote:
--> Yak-List message posted by: Brian Lloyd

Sarah Tobin wrote:

I am replying to this because it was in reply to a message I sent. OTOH,
I am not sure you were specifically addressing this to me.

Quote:
Point to be had is: take a reality check and know your limitations.
Pre-brief all form flights, even if they have been done a million
times. Pretend there is a nebie in the group all the time and if not,
laugh about the good times later after a brewskie.

Seems reasonable to me. Anything we can do to *help* others to fly
safely seems to me to be a good thing.

I think I have said this before but most people still seem to read me
wrong. I think people should be able to do what the way to do in their
own airplane. That includes acro, ACM, form, ground attack, spot
landings, wearing flowered tropical shirts, or whatever floats your
boat. I think that other people should then leave them alone. As long as
it doesn't cause risk to those around you then, what the hey, knock
yourself out!

What I just don't understand is why this attitude gives heartburn to so
many people on this list? Is this an ex-military thing that somehow I am
against you if I'm not with you or what? I agree, my approach to a lot
of what we take for granted is unorthodox. I like to think that it is
because I think about it and then go try it out to see. (Kind of like
the crosswind landing thing with flaps in a CJ6A -- unorthodox but it
works.)

So I would really like to understand how this works before I give up.

--
Brian Lloyd 361 Catterline Way



How low will we go? Check out Yahoo! Messenger’s low PC-to-Phone call rates.


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
brian



Joined: 02 Jan 2006
Posts: 643
Location: Sacramento, California, USA

PostPosted: Sat Apr 01, 2006 3:44 pm    Post subject: ACM possible issues Reply with quote

Sarah Tobin wrote:
Quote:
I am with you Brian, that is why I said what I said, seems to be so many
people placing so many rules on these issues when the basic foundation
of knowing where you are supposed to be when is the really important
thing. I hear ya on doing whatever you want to in your own a/c but in
formation...you can come over and swap paint with me anytime you feel
like it, ya know what I mean?

Yeah? Works for me -- all except for the swapping paint part. Smile I
believe that it is a mortal sin to hurt an airplane. God created man so
there would be airplanes. It is our duty to love them and care for them.

Quote:
I just felt like putting in my two cents to focus on what is important
that is all. Sorry. I am just really safety conscience and at times on
this list it seems that there is an occasional lackadaisical attitude
toward activities that are inherently dangerous and it has worried me.

And I agree with you 100%. Every individual's goal should be to Do No
Harm. I know we want to make sure no one does harm to themselves but I
just don't see how you can force it. Sure, in a military organization
you can enforce it through the chain of command but we aren't military.
The best I see us doing is to Do It Right and be inviting and inclusive
so that the noobs will want to Do It Right too. I just don't see how
anyone can "enforce" anything.

Well, whatever.

Y'all be careful out there, y'hear?

--
Brian Lloyd 361 Catterline Way
brian-yak at lloyd dot com Folsom, CA 95630
+1.916.367.2131 (voice) +1.270.912.0788 (fax)

I fly because it releases my mind from the tyranny of petty things . . .
- Antoine de Saint-Exupery


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

_________________
Brian Lloyd
brian-yak at lloyd dot com
+1.916.367.2131 (voice) +1.270.912.0788 (fax)

I fly because it releases my mind from the tyranny of petty things . . .
- Antoine de Saint-Exupery
Back to top
View user's profile Send private message AIM Address
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group