Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Sumps & carbs

Matronics Email Lists Forum Index -> Tailwind-List

View previous topic :: View next topic

Author Message

ardis_rb(at)hotmail.com
Guest

Posted: Sun Mar 26, 2006 4:47 am Post subject: Sumps & carbs

ADVICE NEEDED----

     i have had Tailwind N4090K since about '75.  I fitted it with a GPU 

(0-290) and used a

0-320 sump and a MA3 carb but didn't work well and eventually friend traded 

me a sump

the the carb would fit.

     I started a rebuild and modification about 10 years ago and am now 

about to hang

a 0-320 that has a sump with the 'flared' riser.  The opening in the sump is 

2.4" across

but the carb, a MS MA4SPA (10-5009) is only 2" but will fit.

     I would appreciate any imput as to the 'right' carb (part #)  to use 

with the 'flared'

riser.  I have a O-320 sump with a straight riser but not sure the 10-5009 

is for it

     I would appreciate any and all information.

THANKS



_________________________________________________________________

Is your PC infected? Get a FREE online computer virus scan from McAfee® 

Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

- The Matronics Tailwind-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Tailwind-List

dmagaw(at)att.net
Guest

Posted: Sun Mar 26, 2006 5:51 am Post subject: Sumps & carbs

Robert: 

I don't know the answer to your questions, but you might get a better response to your questions in the "Lycoming" Yahoo Group which has some very helpful and knowledgable people responding on it.

http://groups.yahoo.com/group/lycoming/ 

Dave M  	  Quote: 	
		  > --> Tailwind-List message posted by: "Robert Ardis" 

 	  Quote: 	
		   

 ADVICE NEEDED---- 

 i have had Tailwind N4090K since about '75. I fitted it with a GPU 

 (0-290) and used a 

 0-320 sump and a MA3 carb but didn't work well and eventually friend traded 

 me a sump 

 the the carb would fit. 

 I started a rebuild and modification about 10 years ago and am now 

 about to hang 

 a 0-320 that has a sump with the 'flared' riser. The opening in the sump is 

 2.4" across 

 but the carb, a MS MA4SPA (10-5009) is only 2" but will fit. 

 I would appreciate any imput as to the 'right' carb (part #) to use 

 with the 'flared' 

 riser. I have a O-320 sump with a straight riser but not sure the 10-5009 

 is for it 

 I would appreciate any and all information. 

   THANKS  

 

 _________________________________________________________________

- The Matronics Tailwind-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Tailwind-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Tailwind-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum