 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
mjpienaar(at)shaw.ca
Guest
|
 Posted: Tue Jan 26, 2010 11:17 pm Post subject: ANDAIR Fuel Selector |
 |
|
If any body used the ANDAIR fuel selector what esthetically pleasing screws did you use to secure the bezel
Thanks
Mike
[quote][b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
 |
bakerocb
Joined: 15 Jan 2006
Posts: 727
Location: FAIRFAX VA
|
| Posted: Wed Jan 27, 2010 5:18 am Post subject: ANDAIR Fuel Selector |
|
|
1/27/2010
Hello Mike, I find that stainless steel hex socket (Allen) drive screws give
a very attractive high tech look. They were used on my instrument panel and
many other places on the airplane including out of sight.
Also where possible I used stainless steel Torx (6 lobe) drive screws in
many applications. In fact one would be hard pressed to find a Phillips
drive screw any place on my airplane.
Check out Microfasteners for a source of the above hex socket and Torx drive
screws:
http://www.microfasteners.com/
For driving these screws you need the right tools. A cordless screw driver
with the right insert bits makes working with these screws a pleasure. See
here for some handy kits:
http://www.chapmanmfg.com/default.htm
'OC' Says: "The best investment we can make is the effort to gather and
understand knowledge."
PS: After years of search efforts in many different places I finally got
Microfasteners to create stainless steel, 100 degree countersink, flat head,
Torx (6 lobe) drive screws. These are used throughout my plane where
possible. I know of no other source for these screws:
http://www.microfasteners.com/catalog/products/SSCFCMXS.cfm
=============================================
---
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
sstearns2(at)yahoo.com
Guest
|
| Posted: Wed Jan 27, 2010 8:22 am Post subject: ANDAIR Fuel Selector |
|
|
I used philips head AN screws with the built in washer because they are lower profile. If you use the normal kind they stick up too far and the handle catches on the screws. Scott
--- On Tue, 1/26/10, Mike Pienaar <mjpienaar(at)shaw.ca> wrote:
| Quote: |
From: Mike Pienaar <mjpienaar(at)shaw.ca>
Subject: ANDAIR Fuel Selector
To: "KISBUILDERS" <kis-list(at)matronics.com>
Date: Tuesday, January 26, 2010, 11:16 PM
If any body used the ANDAIR fuel selector what esthetically pleasing screws did you use to secure the bezel
Thanks
Mike
| Quote: |
et=_blank rel=nofollow>http://www.matronics.com/Navigator?KIS-List
=nofollow>http://forums.matronics.com
blank rel=nofollow>http://www.matronics.com/contribution
|
|
[quote][b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 25204
Location: Livermore CA USA
|
| Posted: Wed Jan 27, 2010 9:26 am Post subject: ANDAIR Fuel Selector |
|
|
You can also special order a replacement faceplate from ANDAIR that has counter sunk holes that work nicely with a #8 flush head screw. See the attached photo of my RV-8 installation.
Matt Dralle
RV-8 #82880 N998RV
http://www.mattsrv8.com
Finishing Up...
At 08:21 AM 1/27/2010 Wednesday, you wrote:
| Quote: | I used philips head AN screws with the built in washer because they are lower profile. If you use the normal kind they stick up too far and the handle catches on the screws. Scott
--- On Tue, 1/26/10, Mike Pienaar <mjpienaar(at)shaw.ca> wrote:
From: Mike Pienaar <mjpienaar(at)shaw.ca>
Subject: ANDAIR Fuel Selector
To: "KISBUILDERS" <kis-list(at)matronics.com>
Date: Tuesday, January 26, 2010, 11:16 PM
If any body used the ANDAIR fuel selector what esthetically pleasing screws did you use to secure the bezel
Thanks
Mike
|
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
| Description: |
|
| Filesize: |
127.38 KB |
| Viewed: |
3998 Time(s) |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
