 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
jeanphilippeneel(at)yahoo
Guest
|
 Posted: Sat Feb 27, 2010 9:15 am Post subject: Re : ECU for NSI propeller |
 |
|
Bonjour Glenn
Be sure that your message is a great hope for me. You are my rescuer!
I am ready to pay that ECU if you want . Please let me know how to pay . The best way for me is to transfert from my bank to yours.
If you agree let me know your bank informations and I will do the payement.
Jean-Philippe Neel
5 chemin de la Batie
38240 Meylan
France
De : glenn crowder <gcrowder2(at)hotmail.com>
À : europa-list(at)matronics.com
Envoyé le : Ven 26 Février 2010, 19 h 01 min 42 s
Objet : RE: ECU for NSI propeller
Hey Jean-Philippe - I have a spare NSI CAP140 ecu controller I have'nt used for years.
It was working fine when I removed it. If you can't resolve the issue I could send it to you for just shipping charges from the USA.
Glenn
Date: Thu, 25 Feb 2010 13:48:03 +0000
From: jeanphilippeneel(at)yahoo.fr
Subject: ECU for NSI propeller
To: europa-list(at)matronics.com
.ExternalClass DIV {} Bonjour à tous,
I have been very happy with my CAP NSI propeller during 1100h used with a simple hand operated changing pitch system. Unfortunatelly , the Electronic Control Unit has just failed:
The way to the fine position woks fine , as well as red light and beeper at the course end .
The way to coarse position is in flaw . I tested motor hub from the brush hoder separatly from ECU : mecanism works well
Then tested the ECU out put voltage ( brush holder not connected) and verified 12v on one way and -12v on the other . During that test I heared closing noise of the 3 electromecanical relays.
So separatly two parts of the global system work well
When every thing is reconnected , the only way working is to fine position.
I suppose the electronic card is defective. Having no electrical drawing of that card I cannot invastigate more away
Is there some body from the Europa community having had such a problem or more simply ideas to help me?
Thank you
Jean-Philippe Neel
Europa N° 273 F-PSLH
Grenoble
France
| Quote: |
| Quote: | http://www.matronics.com/Navigator?Europa-List
ronics.com |
ww.matronics.com/contribution
|
Your E-mail and More On-the-Go. Ge29/direct/01/' target='_new'>Sign up now.
[quote][b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
jeanphilippeneel(at)yahoo
Guest
|
| Posted: Sat Feb 27, 2010 9:24 am Post subject: Re : ECU for NSI propeller |
|
|
Bonjour Simon
Thank you very much for your reply. I have an old NSI documentation and a wiaring diagram of the ECU. But the best new is that I found on ECU for sale in the USA.
This forum is great!!
Merci beaucoup
Jean-Philippe
De : Simon Longstaff <simonlongstaff(at)blueyonder.co.uk>
À : europa-list(at)matronics.com
Envoyé le : Ven 26 Février 2010, 17 h 29 min 53 s
Objet : Re: ECU for NSI propeller
--> Europa-List message posted by: Simon Longstaff <simonlongstaff(at)blueyonder.co.uk (simonlongstaff(at)blueyonder.co.uk)>
It may be that the blades are "sticking" when moving in the coarse direction. More current is taken and the ECM "recognises" this a pitch stop so giving the red light and sound warning. I've had this a few times and is resolved by dismantling the hub, cleaning and regreasing.
If you need any CAP 140 bits, Maxwell Propulsion took over NSI's stock: http://www.maxwellpropulsion.com/, look under inventory reduction sale.
If you need a copy of the CAP 140 manual let me know and I'll send you a photocopyatronics.com/Navigator?Europa-List" target=_blank>http://www.matronics.co========================http://forums.matronics.cp; -Mcs.com/contribution" target=_blank>http://www.matronics.com/contribution<=============
[quote][b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
gcrowder2
Joined: 09 Jan 2006
Posts: 136
Location: Golden, Colorado USA
|
| Posted: Sun Feb 28, 2010 4:52 pm Post subject: Re : ECU for NSI propeller |
|
|
Glad to help Jean-Phillipe. I will be mailing out the ECU on Monday. Should I go with faster or
slower shipping?
Glenn
Bonjour Glenn
Be sure that your message is a great hope for me. You are my rescuer!
I am ready to pay that ECU if you want . Please let me know how to pay . The best way for me is to transfert from my bank to yours.
If you agree let me know your bank informations and I will do the payement.
Jean-Philippe Neel
5 chemin de la Batie
38240 Meylan
France
De : glenn crowder <gcrowder2(at)hotmail.com>
À : europa-list(at)matronics.com
Envoyé le : Ven 26 Février 2010, 19 h 01 min 42 s
Objet : RE: ECU for NSI propeller
.ExternalClass .ecxhmmessage P {padding:0px;} .ExternalClass body.ecxhmmessage {font-size:10pt;font-family:Verdana;} Hey Jean-Philippe - I have a spare NSI CAP140 ecu controller I have'nt used for years.
It was working fine when I removed it. If you can't resolve the issue I could send it to you for just shipping charges from the USA.
Glenn
Date: Thu, 25 Feb 2010 13:48:03 +0000
From: jeanphilippeneel(at)yahoo.fr
Subject: ECU for NSI propeller
To: europa-list(at)matronics.com
.ExternalClass DIV {;} Bonjour à tous,
I have been very happy with my CAP NSI propeller during 1100h used with a simple hand operated changing pitch system. Unfortunatelly , the Electronic Control Unit has just failed:
The way to the fine position woks fine , as well as red light and beeper at the course end .
The way to coarse position is in flaw . I tested motor hub from the brush hoder separatly from ECU : mecanism works well
Then tested the ECU out put voltage ( brush holder not connected) and verified 12v on one way and -12v on the other . During that test I heared closing noise of the 3 electromecanical relays.
So separatly two parts of the global system work well
When every thing is reconnected , the only way working is to fine position.
I suppose the electronic card is defective. Having no electrical drawing of that card I cannot invastigate more away
Is there some body from the Europa community having had such a problem or more simply ideas to help me?
Thank you
Jean-Philippe Neel
Europa N° 273 F-PSLH
Grenoble
France
| Quote: |
| Quote: | http://www.matronics.com/Navigator?Europa-List
ronics.com
|
ww.matronics.com/contribution
|
Your E-mail and More On-the-Go. Ge29/direct/01/' target='_new'>Sign up now.
| Quote: |
| Quote: | http://www.matronics.com/Navigator?Europa-List
ronics.com
|
ww.matronics.com/contribution
|
Hotmail: Free, trusted and rich target='_new'>Get it now. [quote][b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
