 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
tmclam(at)comcast.net
Guest
|
 Posted: Sun Jul 04, 2010 4:33 am Post subject: Nose Slam 1 |
 |
|
OC,Mark,Rich and all
These recent discussions are fantastic.More to the point.
OC perhaps removing approximately 20 # forward of the main gear would help the "nose slam problem".!0 # under the Spinner could be demonstrated by temporarily using a borrowed wood propeller.If this does not quite do it ,we should all take a hard look at the new Simplified Dynon basic 6 displays.The larger one is visible in bright daylight.
Use of these new devices allows the removal of
Vacuum pumps
Vacuum hoses ,gages,Regulators and so on.
Heavy Attitude Horizon and Directional Gyro
We should easily obtain a significant instrument panel weight reduction.In addition a 20# forward weight reduction will reduce trim drag and may reduce cruise angle of attack[which equals big time drag].
These new postage size Electronic Gyros are amazing,I think?
Ted
[quote][b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
 |
sstearns2(at)yahoo.com
Guest
|
| Posted: Sun Jul 04, 2010 9:53 am Post subject: Nose Slam 1 |
|
|
I have two dynons in my panel. A D-100 for flight insturments and a D-180 which has both flight instruments and engine instruments. They also have battery backups that work for 1.5 hours. My experience with them has been very good and it's also easy to download the data files from each flight which has been a huge help during flight testing.
Sco
--- On Sun, 7/4/10, tmclam(at)comcast.net <tmclam(at)comcast.net> wrote:
| Quote: |
From: tmclam(at)comcast.net <tmclam(at)comcast.net>
Subject: Nose Slam 1
To: kis-list(at)matronics.com
Date: Sunday, July 4, 2010, 5:32 AM
#yiv605069051 p {margin:0;} OC,Mark,Rich and all
These recent discussions are fantastic.More to the point.
OC perhaps removing approximately 20 # forward of the main gear would help the "nose slam problem".!0 # under the Spinner could be demonstrated by temporarily using a borrowed wood propeller.If this does not quite do it ,we should all take a hard look at the new Simplified Dynon basic 6 displays.The larger one is visible in bright daylight.
Use of these new devices allows the removal of
Vacuum pumps
Vacuum hoses ,gages,Regulators and so on.
Heavy Attitude Horizon and Directional Gyro
We should easily obtain a significant instrument panel weight reduction.In addition a 20# forward weight reduction will reduce trim drag and may reduce cruise angle of attack[which equals big time drag].
These new postage size Electronic Gyros are amazing,I think?
Ted
| Quote: |
=nofollow target=_blank>http://www.matronics.com/Navigator?KIS-List
et=_blank>http://forums.matronics.com
llow target=_blank>http://www.matronics.com/contribution
|
|
[quote][b]
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
