Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

582 mounting problem

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

occom

Joined: 26 Aug 2006
Posts: 404

Posted: Sun Sep 19, 2010 5:15 pm Post subject: 582 mounting problem

I am in the process of replacing my model 90  582 with a bluehead model 99. In the original building manual they indicate that  all the mounting points will be equipped with 8mm holes, and the top  left front hole may require tapping. 

  

 My new engine has an offset 6mm tapped hole in that  location, I will attempt to include a picture. Has anyone else encountered this  change, and what did you do? My initial inclination is to simply use the smaller  bolt and leave the block unaltered. 

  

 Dave Goddard

KF IV 1050 / 582 /  Warp

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

IMG_1026.JPG

Description:

Filesize:

51.39 KB

Viewed:

3540 Time(s)

dave

Joined: 22 Sep 2006
Posts: 1382

Posted: Mon Sep 20, 2010 1:04 am Post subject: 582 mounting problem

Dave,

  

 I have had same issue and used a piece of S/S for  the samller hole.

 Rviet the SS plate to your alum engine mount.   

  

 Drilling and Tapping to me would be risky of  screwing up something else. You got a good hole there already.  I have over  1000 hours on this setup on my plane alone with no issues.  I do rip  the rear mounts out once in a while though. 

  

 Dave

  

  

 [quote]   ---

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Realtime Kitfox movies to separate the internet chatter from the truth
http://www.youtube.com/user/kitfoxflyer
Hundreds of Kitfox Movies
Most viewed Kitfox on youtube
Most popular on youtube
Highest rated on youtube

akflyerbob

Joined: 06 Jan 2008
Posts: 30
Location: Soldotna, Alaska

Posted: Mon Sep 20, 2010 5:37 pm Post subject: Re: 582 mounting problem

I took the left front mount to a welding shop

and had the upper hole welded up and drilled

a new offset hole. All is good

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Bob Wolfe..Soldotna, Alaska
KF Mod I and III

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum