Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

701 Rear Rudder Skin

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List
View previous topic :: View next topic  
Author Message
ifly4fun2(at)sbcglobal.ne
Guest





PostPosted: Sun Sep 09, 2007 11:58 am    Post subject: 701 Rear Rudder Skin Reply with quote

701 List,
I'm at the point of drilling through the rear rudder skin into the ribs and I'm slightly apprehensive of doing so. The assembly manual states that the leading edge of the rear skin should be flush with the spar (Rev 1.6 pg 7). How many of you actually were able to do so without the tapered end of the bottom rib causing a bulge at the skins T.E.? Also did you guys align the forward skin to be flush with spar web or with the bend tangent along the length of the spar? Any advice before ruining the rudder would be greatly appreciated.

Thanks,
Art
701 Rudder
[quote][b]


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
Ron Lendon



Joined: 10 Jan 2006
Posts: 685
Location: Clinton Twp., MI

PostPosted: Mon Sep 10, 2007 7:05 am    Post subject: Re: 701 Rear Rudder Skin Reply with quote

Welcome to the world of fear. I am scratch building a 601 but the principles are the same. Take a look at mykitlog site around 1-29-2006, it might give you some ideas or how to proceed.

- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
Ron Lendon
WW Corvair with Roy's Garage 5th bearing
CH 601 XLB
N601LT - Flying
http://www.mykitlog.com/rlendon
Corvair Engine Prints:
https://sites.google.com/site/corvairenginedata/
Back to top
View user's profile Send private message Send e-mail Visit poster's website
rbjjr



Joined: 18 Mar 2007
Posts: 36

PostPosted: Mon Sep 17, 2007 9:07 am    Post subject: Re: 701 Rear Rudder Skin Reply with quote

I am building with kit ribs and scratch built skins. Mine bulged ever so slightly at the trailing edge at each rib. Hardly noticeable.

After consulting pictures from the manual, Zenith's site, other builder's sites and the Homebuilt Help video, I'm satisfied with how things came out.

Burke Johnson
Irvington, VA


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group