Matronics Email Lists :: View topic - Pray for Dan's family

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Pray for Dan's family
Goto page Previous 1, 2

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

ron.mcgann(at)baesystems.
Guest

Posted: Fri Nov 02, 2007 2:04 pm Post subject: Pray for Dan's family

I'm simply lost for words.



It is a sad day indeed, and my thoughts and best wishes are with his family.



Ron

"Warning:

The information contained in this email and any attached files is

confidential to BAE Systems Australia. If you are not the intended

recipient, any use, disclosure or copying of this email or any

attachments is expressly prohibited.  If you have received this email

in error, please notify us immediately. VIRUS: Every care has been

taken to ensure this email and its attachments are virus free,

however, any loss or damage incurred in using this email is not the

sender's responsibility.  It is your responsibility to ensure virus

checks are completed before installing any data sent in this email to

your computer."

joe(at)rvbuildernet.com
Guest

Posted: Fri Nov 02, 2007 2:07 pm Post subject: Pray for Dan's family

I am a new builder and did not know Dan. 

This is truly a sad day for all of us

Our Prayers are with his family

Joe and Marcia Rhodes



--

Jim Carlton

Joined: 09 Jan 2006
Posts: 10

Posted: Fri Nov 02, 2007 3:02 pm Post subject: Pray for Dan's family

I, too, never met Dan in person, but his encouragement towards the build, his enthusiasm for aviation, made an impact on me. I wish I could have met up with him as he was traveling to Dana's gig one day some time ago, but my scheduling would not allow it. My loss. I understand he was big into the electronics and toys of aviation that we all wish we knew more about. Condolences to his family and his friends. 



We are a smaller world today...



Jim

---- Pascal <rv10builder(at)verizon.net> wrote: 

[quote] 

 

 It's amazing how a bond can be created with someone, simply from receiving 

 responses to questions from that person. I am rather saddened and shocked by 

 this news in a way that I knew this person, even though I never met him.

 Godspeed Dan!

 

 Pascal

 

 ---

Jim Carlton

Joined: 09 Jan 2006
Posts: 10

Posted: Fri Nov 02, 2007 3:03 pm Post subject: Pray for Dan's family

I, too, never met Dan in person, but his encouragement towards the build, his enthusiasm for aviation, made an impact on me. I wish I could have met up with him as he was traveling to Dana's gig one day some time ago, but my scheduling would not allow it. My loss. I understand he was big into the electronics and toys of aviation that we all wish we knew more about. Condolences to his family and his friends. 



We are a smaller world today...



Jim

---- Pascal <rv10builder(at)verizon.net> wrote: 

[quote] 

 

 It's amazing how a bond can be created with someone, simply from receiving 

 responses to questions from that person. I am rather saddened and shocked by 

 this news in a way that I knew this person, even though I never met him.

 Godspeed Dan!

 

 Pascal

 

 ---

AV8ORJWC

Joined: 13 Jul 2006
Posts: 1149
Location: Aurora, Oregon "Home of VANS"

Posted: Fri Nov 02, 2007 4:39 pm Post subject: Pray for Dan's family

Larry - what a wonderful tribute to Dan's perpetual spirit.  I can still remember his big smile, the pride of completion and the times we shared discussing mods to make this kit even better for many.  Here are two pictures which capture just a glimpse (for those who missed out).  I even found postings that we shared below the radar screen on the use of Solidworks.  He was always willing to discuss, to share and to dream together.  He could often be found in a "Flying High Sky" blue or "Arrest Me for Dreaming" red t-shirt.  

 <<Dan and his plane.pdf>>  "Hiding with pride behind the VANS tent"  

  

        "Lloyd, Daniel R." <lloyddr(at)wernerco.com> wrote:  

I have this scanned at work full size, I also have the engineers  

upstairs putting together a Solid Works model of it, so we can wrap  

custom skins on it, then you will be able to see what your paint job  

will look like.  

I traded flight hours for their lunch time to create it, I will post it  

when it is done for all to use. Also we have an artist that will render  

it for you in a custom setting.  

If anyone wants the full-size drawing in PDF, I would be happy to send  

it, you can then take it down to Kinko's and make posters to your hearts  

desire.   

Bio: 34, IT Manager for Werner Ladder, PP-SEL, Instrument Student, 150  

Hours TT, Cherokee Driver, till 10 is done. Based in Hermitage, PA. It  

is on the Ohio Border, 1 hour North of PITT. Have 2 Kids, 11 and 6, not  

adding any more, (they do not make a larger kit plane!)  

Finishing Emp/Cone, have wings ready to start.  

I agree with Tim, seems like a lot of geeks are into plane building,  

maybe we like the many hours of alone time in the garage?  

What do you need on solid works? We use it here at Werner and have 20 seats. Let me know Dan  

I also agree with what is here. I am looking at an alternative engine, and am very interested in exploring this avenue. Things that would motivate me are test cell running to prove TBO, and number of Aircraft installed on, I realize to break into the market place you would need Beta testers, I am willing to do that beta testing, but would be have to be at manufactures expense. If I am willing to use my airframe, the least they could do is provide the engine for testing/ proof of concept. Dan 40269  

 <<Dan and the gang.pdf>> "Sharing in the group builder discussions at Camp Condrey - OSH '07"  

I will continue to cling to the memory of his infectious smile as we talked confidentially of renegade builders, unusual techniques and bold ideas for many product improvements.  He was my idea of a REAL Experimental/Amateur Aircraft Builder with passion in his every breath and the desire to make another step to "Living the Dream".  

John Cox - KUAO (#40600)  I am forever making November 1st - Dan Lloyd Day  

  

--> RV10-List message posted by: Larry Rosen <LarryRosen(at)comcast.net>  

I too am saddened by the loss of Dan.  I don't think I ever met him, but   

like many others I felt I knew him.  He was part of our extended   

family.  So, to remember Dan, I went through my archives and read many   

of his posts.  He sure did contribute and help many of us.  

So as a tribute, below are a collection of his emails.  

*To start off, here is is last post to the list, from yesterday:*  

On mine the cups went up about halfway, and the springs really had to be  

compressed to fit at all. I made the angle spacers, and tried to screw  

everything together repeatedly before I finally figured out how to get  

it all to work. The easy way to do it, is to put all three through the  

face plate and set it on the bench, put springs on the screws, backing  

plate on, and compress the springs until they just seat in the nut  

plates. Then this is the hard part, slide the whole assembly to the side  

of the bench and as one screw is exposed get a screwdriver on it and  

hold the pressure. Do this for each of the three and it works. The hard  

part is then getting the angle spacers to line up, but work with it.  

Dan  

N289DT RV10E Flying  

*Did anyone at OSH this year take Dan up on use of his wife's Expedition:*  

We will have our Expedition, and will be happy to coordinate picking  

your stuff up and moving it back and forth for you.  

Dan  

The RV10 is large, but it does not have a trailer hitch, and the pop-up  

is too big to fit into the baggage area, so because we will be there the  

whole week my wife offered to drive up and meet us there.  

I SHOULD be there with the RV10E and the Expedition.  

Dan  

Keep in mind I am a glutinous American, so why only take one, I will be  

taking both the RV10E and the Expedition, it is my right to burn as much  

fuel as possible on a trip!  

Dan  

Maintenance crew, now you are funny, it is to carry the cotton baby  

diapers to wipe off all the drool and fingerprints everyone will be  

putting on it!  

Dan  

*Dan sure did love his RV-10  

Here's one from transition training, which was his first flight in the 10*  

Hey guys,  

I have spent the past day out in Oregon with Mike Seager and flying the   

factory 10. I now have 3 hours in type and 15 landings. I have two more   

days to fly with him and try and get my mind wrapped around this fast   

bird. I know many of you have 4/6/7/8 time, and the 10 is not the same,   

but all I can say is WOOHOO! Put the throttle in and it instantly leaps   

in the air, blink and we are passing through 2k ft. We flew North and   

trued out over 200MPH,  

did I say this plane is incredible?? 2.5 years and I am in the home   

stretch, and I can not wait to fly my own, and finally report my first   

flight.  

I know it sounds funny, but we chose to build the 10 without ever having   

been in one, and all of expectations have been met and exceeded. For   

those of you in the same boat as myself, 150 hrs in SPAM cans, I can not   

stress the value of transition training and spending the time necessary   

to get used to these planes. Things are happening so fast that it is   

difficult at first, but after several hours with Mike I am starting to   

feel that with a couple hundred more I might make an RV pilot. One thing   

that I find very funny is that I have heard about P-factor and the need   

for right rudder, and thought I knew about it, but the first time you   

put the throttle to 260 HP you quickly realize what you had no clue   

about!!! Get the transition training so you are ready.  

While I have been out here I have met a couple of the guys and toured   

Vans factory, too cool to say the least. But other than flying the 10,   

the most memorable part of the trip is the hospitality of Ed Hayden, he   

helped me around town, and took an afternoon to show me his project.   

What a plane, all the bell's and whistles and then some! I can not wait   

to reciprocate when he comes to town. It is the builder community that   

makes this so much fun and Ed is a pillar of the community making us   

feel welcome!  

THX  

Dan Lloyd  

N289DT RV10E Finally I can say finishing up!!!  

...BUT with everything being said about costs, planning and such, lets keep  

in the perspective that there is not a better feeling than the first  

time you take off in a plane you built in your garage, it makes  

everything else a mute point. No matter what you have to do, collect  

aluminum cans if you have to! Build one and fly it, it is definitely  

worth the heartache and frustration along the way!  

Dan  

N289DT RV10E flying  

*Dan encoring us on:*  

Congrats Tom, and we look forward to hearing about your progress. If you  

want to have your wife talk to Trish feel free to call and they can  

brainstorm on how each team member can participate. Each of our kids got  

to sign the inside of every structure they worked on, with name, date  

and age. Even the younger kids can participate by handing tools, sorting  

pieces etc.  

Give us a call, and I would be happy to fly up and give you guys some  

motivational rides and get everyone excited about the adventure ahead!  

Dan  

N289DT RV10E Flying  

*Here's one for you Deems:*  

Hang in there Deems, you are getting close! After 10.6 hours and 68  

landings logged, I can say this plane is worth it. It will be everything  

you wanted and more. Now I just need to get home and git'r'done too. I  

heard you were coming up to the dinner in a couple of weeks, make sure  

to get Randy and others to give you a ride for motivation. This is when  

you need it most to get you over the hump!  

Dan "starting the up hill push to finish"  

N289DT RV10E  

*and the last one, Dan asking us to be safe:*  

You need to be careful on this, allot of people follow this list and   

read your recommendations on both safety of flight issues, as well as   

equipage for IFR, but they do not know you do not have a pilots license   

and do not have any IMC time, to make this type of comment could lead   

allot of low time pilots to believe that they can get by without   

training. When I got the transition training from Mike and let him   

review your comment he stated that even he, as the pilot with the "most   

RV time around" would not get into a new plane and fly when/if there is   

transition training available, even he would take several hours and   

learn the intricacies of the new plane.  

I can not stress the value of transition training enough, regardless of   

how much time you have, this is why most insurance agencies will not   

insure without dual time. We do not want to end up like the Lancair guys   

and have our insurance so high it is unaffordable. We are building plans   

valued north of $100k and in the scheme of things transition training is   

a very low cost item to help ensure a successful first flight.  

Dan Lloyd  

N289DT  

RV10E 

  

*Godspeed Dan!*  

Larry Rosen  

RV-10 #356  

N205EN (reserved)  

  

  

  

  

  

http://www.matronics.com/Navigator?RV10-List  

  

  

  

http://forums.matronics.com

Dan_and_his_plane.pdf

Description:

Download

Filename:

Dan_and_his_plane.pdf

Filesize:

61.44 KB

Downloaded:

692 Time(s)

Dan_and_the_gang.pdf

Description:

Download

Filename:

Dan_and_the_gang.pdf

Filesize:

80.68 KB

Downloaded:

643 Time(s)

rv(at)thelefflers.com
Guest

Posted: Fri Nov 02, 2007 8:53 pm Post subject: Pray for Dan's family

Both my son and I took Dan up on his offer.  He was gracious enough to offer

us a ride to Michael Sausen's house at OSH.  While I met Dan and his family

the week before in Greenville as he was finishing his RV-10, we got to know

the family better on the hour drive to Michael's.



His last email to me on Wednesday was:



"I would definitely knock out the fiberglass as you go, I waited to the end

and was so fed up with it that I got bummed out and am still avoiding the

tail. One thing to make sure of, that I saw during Rick's build and mine is

that the Elevator horn fairings do not line up well and require work on the

trailing edge, so fix these by cutting them flush on the trailing edge and

feathering in and taping the line all the way around. I saw how Rick did it

and will do the same on mine. I do not like that transition between the

fairing and the elevator, so I am going to hide it  "



Our prayers are with Dan and his family.



--

wayne.e(at)grandecom.net
Guest

Posted: Sat Nov 03, 2007 4:07 am Post subject: Pray for Dan's Family

Our families thoughts and prayers go out to Dan's  family and friends during these very trying times for them. When tragedies like  this happens it makes us stop a think how precious life is and the  wonderful friends that we have.

  

 Dan will be missed.

  

 Wayne Edgerton 

  

  

  

  

  

   [quote][b]

DAVELEIKAM(at)wi.rr.com
Guest

Posted: Sat Nov 03, 2007 4:25 am Post subject: Pray for Dan's family

I will pray.



Dave Leikam

---

bcondrey

Joined: 03 Apr 2006
Posts: 580

Posted: Sat Nov 03, 2007 7:15 am Post subject: Re: Pray for Dan's family

We spent evenings together at OSH for the last couple of years and this came as a terrible shock to both of us.  I'm totally at a loss for words.  Our deepest sympathy and prayers for Dan, Trish and the kids.  



Bob & Susan Condrey

ogdenk

Joined: 05 Feb 2007
Posts: 41
Location: Syracuse, NY

Posted: Sat Nov 03, 2007 10:23 am Post subject: Pray for Dan's family

What a horrible event, something I hoped wouldn't happen for a long time.  I

didn't know Dan, but you could tell he was a great guy from his posts.  My

thoughts are with the family.



Kent Ogden and family

--

hotwheels

Joined: 01 Jun 2007
Posts: 240

Posted: Sat Nov 03, 2007 7:52 pm Post subject: Pray for Dan's family

It's a tragic loss and I didn't even know the guy. This really hits close to home - especially seeing the photos. Gut wrenching comes to mind.



Anyone know his address so those that are interested can send a condolences card?

My prayers are with Dan and his family.

Jay



Do not archive



__________________________________________________

Dsyvert(at)aol.com
Guest

Posted: Sun Nov 04, 2007 3:19 am Post subject: Pray for Dan's family

I only knew Dan through this list and meeting him at OSH this  summer. Both on the list and in person, I could tell he was a very unique  person. A famous poem by Robert Frost comes to mind that is called "The  Road Less Traveled". The last part of the poem is:

  

 Two roads diverged in a wood, and I —

I took the one less traveled  by,

And that has made all the difference.

  

 Everyone who builds these planes goes takes "a road less traveled".  Dan took it to another level. This is a great loss in  many respects. I will pray for his family.

  

 Dave Syvertson



See wh [quote][b]

Tim Olson

Joined: 25 Jan 2007
Posts: 2882

Posted: Sun Nov 04, 2007 4:37 am Post subject: Pray for Dan's family

Reposted from the VAF site:



Tim

do not archive

-------------



Brian, and all, I am sharing this from Rick Gray on the Ohio Valley 

RVators list:



Hi Folks,



I don't have all the details yet and probably won't till late

tomorrow or Monday at the earliest.



I spoke to one of the Funeral Homes in Dan's hometown this evening.

She said that she has a record of 68 Funeral Homes in the area and

Dan wasn't listed as of late this evening. I was told that under the

circumstances the Funeral could be as late as Wednesday or Thursday.

Anyway, she told me to call back tomorrow so I will and will report

back as soon as I know more.



That said, general concensus from the group today was to send a

tree/flowers for Dan. I will call tomorrow but doubt the Florists

will be open so most likely Monday morning. The tree/flower

arrangement will be from The Ohio Valley RVators. If you want to

send something that is 'just from you'.....I'll be posting the

address for the Funeral Home as soon as I have it.



We're also going to take up a collection. I'll be the contact and

will deduct for the tree/flowers then forward the rest per Trish's

wishes.



We also agreed that we'd like to hold a little grass roots fly-in in

Dan's memory. I'll contact the Greenville Airport where Dan flew out

of in the near future and see if they'll help out.



For those wishing to give....I'll be collecting the donations then

will forward it as mentioned above. My mailing address is:



Rick Gray

200 Baker Trail

Vincent, Ohio 45784



For those of you wishing to send a card or letter to Trish, here is

the mailing address:



Daniel (Dan) R. Lloyd

3249 Timer Lane

Hermitage, Pa 16148



As far as a Missing Man ceremony for Dan. I won't know till I talk to

Trish.



Dan had a LOT of friends in the RV community. Please feel free to

share what we're doing with any of the various groups such as Doug

Reeves site and the Matronics RV10 list.



I realize that this doesn't cover all the bases but I think it's a

good starting point.



Any questions, comments, or suggestions are appreciated.



Rick at the Buffalo Farm

__________________

Dana Overall

Richmond, KY i39

RV-7, "Black Magic"

http://rvflying.tripod.com/blackwing1.jpg

http://rvflying.tripod.com

O-360 A1A C/S

VAF #993

jesse(at)saintaviation.co
Guest

Posted: Sun Nov 04, 2007 5:42 am Post subject: Pray for Dan's family

Did Dan ever finish getting his plane painted?  If so, does anybody have a

good picture of it?



Do not archive



Jesse Saint

Saint Aviation, Inc.

jesse(at)saintaviation.com

www.saintaviation.com

Cell: 352-427-0285

Fax: 815-377-3694

cloudvalley(at)comcast.ne
Guest

Posted: Sun Nov 04, 2007 5:48 am Post subject: Pray for Dan's family

Hi Tim,

  Thank you. I am not sure but you could have meant a differnet Brian. I have not said much here lately.We have not sold our house yet, but we will move to Ohio when it does..we hope. Sorry to hear about  Dan..

 Brian Preston

  

 [quote]-------------- Original message -------------- 

From: Tim Olson <Tim(at)MyRV10.com> 



[quote] --> RV10-List message posted by: Tim Olson 

 

 Reposted from the VAF site: 

 

 Tim 

 do not archive 

 

 

 ------------- 

 

 Brian, and all, I am sharing this from Rick Gray on the Ohio Valley 

 RVators list: 

 

 Hi Folks, 

 

 I don't have all the details yet and probably won't till late 

 tomorrow or Monday at the earliest. 

 

 I spoke to one of the Funeral Homes in Dan's hometown this evening. 

 She said that she has a record of 68 Funeral Homes in the area and 

 Dan wasn't listed as of late this evening. I was told that under the 

 circumstances the Funeral could be as late as Wednesday or Thursday. 

 Anyway, she tol  d me t o call back tomorrow so I will and will report 

 back as soon as I know more. 

 

 That said, general concensus from the group today was to send a 

 tree/flowers for Dan. I will call tomorrow but doubt the Florists 

 will be open so most likely Monday morning. The tree/flower 

 arrangement will be from The Ohio Valley RVators. If you want to 

 send something that is 'just from you'.....I'll be posting the 

 address for the Funeral Home as soon as I have it. 

 

 We're also going to take up a collection. I'll be the contact and 

 will deduct for the tree/flowers then forward the rest per Trish's 

 wishes. 

 

 We also agreed that we'd like to hold a little grass roots fly-in in 

 Dan's memory. I'll contact the Greenville Airport where Dan flew out 

 of in the near future and see if they'll help out. 

 

 For those wishing to give....I'll be collecting the d  onatio ns then 

 will forward it as mentioned above. My mailing address is: 

 

 Rick Gray 

 200 Baker Trail 

 Vincent, Ohio 45784 

 

 For those of you wishing to send a card or letter to Trish, here is 

 the mailing address: 

 

 Daniel (Dan) R. Lloyd 

 3249 Timer Lane 

 Hermitage, Pa 16148 

 

 As far as a Missing Man ceremony for Dan. I won't know till I talk to 

 Trish. 

 

 Dan had a LOT of friends in the RV community. Please feel free to 

 share what we're doing with any of the various groups such as Doug 

 Reeves site and the Matronics RV10 list. 

 

 I realize that this doesn't cover all the bases but I think it's a 

 good starting point. 

 

 Any questions, comments, or suggestions are appreciated. 

 

 Rick at the Buffalo Farm 

 __________________ 

 Dana Overall 

 Richmond, KY i39   

&  = the    	  Quote: 	
		  [b]

n8vim(at)arrl.net
Guest

Posted: Sun Nov 04, 2007 5:52 am Post subject: Pray for Dan's family

The wings were painted, but the fuselage was not.



He was at Oshkosh, so there must be thousands of photos... Also there's 

the video on www.eggenfellneraircraft.com of his plane.



Maybe we should construct our own "photo album" of the pictures we took 

with comments and then send to Trish and the kids?



-Jim 40384



Jesse Saint wrote:



 	  Quote: 	
		  



Did Dan ever finish getting his plane painted?  If so, does anybody have a

good picture of it?



Do not archive



Jesse Saint

Saint Aviation, Inc.

jesse(at)saintaviation.com

www.saintaviation.com

Cell: 352-427-0285

Fax: 815-377-3694

Tim Olson

Joined: 25 Jan 2007
Posts: 2882

Posted: Sun Nov 04, 2007 5:56 am Post subject: Pray for Dan's family

No, it never got more than what was at OSH.



Jesse Saint wrote:

 	  Quote: 	
		   

 

 Did Dan ever finish getting his plane painted?  If so, does anybody have a

 good picture of it?

 

 Do not archive

 

 Jesse Saint

 Saint Aviation, Inc.

 jesse(at)saintaviation.com

 www.saintaviation.com

 Cell: 352-427-0285

 Fax: 815-377-3694

Tim Olson

Joined: 25 Jan 2007
Posts: 2882

Posted: Sun Nov 04, 2007 6:52 am Post subject: Pray for Dan's family

Here is another repost to correct the address:



***************

Please change the address for Dan Lloyd in the above post to read:



3249 Timber Lane

instead of 3249 Timer Lane - the 'b' was left off



***************

-- 

Tim

do not archive

jesse(at)saintaviation.co
Guest

Posted: Sun Nov 04, 2007 7:03 am Post subject: Pray for Dan's family

Does anybody know if he had shared his desired paint scheme?  Does anybody

think it would be inappropriate to get a model of it made for Trish?  Maybe

something to go with the photo album from the RV10-List to Trish.



Jesse Saint

Saint Aviation, Inc.

jesse(at)saintaviation.com

www.saintaviation.com

Cell: 352-427-0285

Fax: 815-377-3694



--

Tim Olson

Joined: 25 Jan 2007
Posts: 2882

Posted: Mon Nov 05, 2007 9:54 am Post subject: Pray for Dan's family

cc'd from our Ohio Valley RVators site:



I spoke with Trish again last night, her words...."I'm taking it one 

hour at a time." She asked me to extend her warmest thanks and 

appreciation for all the Prayers.



Here are the details as I know them:



1 - Obituary will come out in today's Sharon Herald but will NOT be 

available on line until tomorrow (Tuesday 6 Nov). I'll post it as soon 

as I have it.



2 - There will be a Visitation on Wednesday (7 Nov) from 5pm-7pm 

followed by a 7pm Service held at:



McGonigle J. Bradley Funeral Home

1090 E. State Street

Sharon, Pa. 16146



There will be no Funeral.



3 - After speaking with the florist(s) we decided against a tree (for 

now). The thought being that a)there wouldn't be any leaves on the tree 

and b)an evergreen of some sort would be very heavy and would more then 

likely create a lot of work for Trish. So, we went with a VERY NICE 

'Permanent Seasonal Arrangement' that Trish can take home. Again, I 

understand that this arrangement will be extremely nice and very well 

received.



4 - Trish has set up a 'Daniel Lloyd Memorial Scholarship Fund' for 

their children Cameron and Becca. I've received many calls and emails 

from folks that want to donate. If you wish to donate feel free to send 

a check. Nothing is too small or too large. I'll put the money together 

and will hand deliver it to Trish in a few weeks. Perhaps some of you 

could accompany me when I do this?



Send to:



Rick Gray

200 Baker Trail

Vincent, Ohio 45784



I've already received some donations....On behalf of Trish and the 

kids....'Thank You'.



5 - Dan wore his Ohio Valley RVators hat just about everywhere he went. 

I got a new hat for him (Thanks Glen 'Dogg' Miller) and will bring it 

the Gag Awards/Birthday Party UFO this coming weekend at PHD. I'd like 

to get as many folks as I can to sign the hat for Dan. I'll give it to 

Trish along with the donations to the Scholarship Fund. I'll try to do 

the same with one of the pictures.



6 - Thank You for all the pictures. I've received a bunch of really nice 

ones! I've done a little editing and have sent them to Trish. She'll 

select the ones she wants and will display them at the 'Visitation' on 

Wednesday.



7 - Cards and Letters can be sent to Trish at:



Daniel (Dan) R. Lloyd

3249 Timber Lane

Hermitage, Pa 16148



8 - I talked with Rod Paul from the Greenville airport again today. We 

have their full support and will make arrangements with them and Trish 

for the Fly-In in Dan's Memory in 2008 . We WILL do a Missing Man 

Formation in Dan's Honor at that time. My thoughts are that we could 

also present Trish with the tree at that time as well. Perhaps we could 

even plant it for her the same weekend.



9 - Also, I'm putting all the (appropriate) posts from our Ohio Valley 

RVators yahoo site and Doug Reeves VAF site together in a document and 

will print it out for Trish. There are way too many nice comments and 

posts to let it slip by. I'm sure her and the kids will appreciate 

having this for years to come.



I plan on driving up to see Trish at the Visitation on Wednesday. I'll 

be leaving around 1pm and traveling up Rt77. If anyone wants to join me 

I can pick you up on the way by.



Thanks for all your support.



Rick at the Buffalo Farm

__________________

Rick in Ohio at the Buffalo Farm

http://rv6rick.tripod.com/ohiovalleyrvators/

Reply With Quote

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours Goto page Previous 1, 2
Page 2 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum