Matronics Email Lists :: View topic - Conventional tail dragger conversion

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Conventional tail dragger conversion - Help Nee

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

rlowe(at)speedway.ca
Guest

Posted: Mon May 12, 2008 4:40 am Post subject: Conventional tail dragger conversion - Help Nee

Paul,



I also would like you or anybody for that matter to send info on what is required and where to get parts to build a conventional geared Europa. My kit is originally a monowheel but haven't done any of the gear building yet.



Thanks,



Roger 

A252



[quote:0adf11b6c7="n100rh at sbcglobal.net"]



Paul,

Would you send me the contact information needed for the conversion. I 

too am thinking of changing to a tail dragger.

Thank you,

Ralph

Reno, NV



Paul McAllister wrote:

[quote:0adf11b6c7]



Hi All,



Some of you may recall from my previous postings that I intend to

convert my mono to a tail dragger.  I got the conversion kit from Bob

Berbue about a month ago and I have decided that I will fly this

summer and then over winter I will do the conversion.



I am slowly organizing all the bits I need and I was wondering if some

generous soul would be prepared to lend me the moulding that fits on

the tunnel for the finger brakes, and the aluminum hardware that is

used for mounting up the Matco master cylinders.  I'd like make a

splash copy of the moulding and return it as soon as I am finished.



If anyone in the US can help me I'd appreciate it. Obviously I would

cover any out of pocket expenses.  Please contact me off forum if you

can help.



Thanks and regards,  Paul

[/quote:0adf11b6c7][/quote:0adf11b6c7]

Visit -  www.EuropaOwners.org

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

DuaneFamly(at)aol.com
Guest

Posted: Mon May 12, 2008 9:18 am Post subject: Conventional tail dragger conversion - Help Nee

Roger,

  

 Contact Bob Berube at FlightCrafters in Florida. He has been a man in the  fore front of Europa Convential Gear installations. He has a set of large  aluminum brackets that get installed under the seat. To these brackets, a one  piece aluminum main gear is attached. You keep your standard tailwheel from the  mono.   

 Mike Duane  A207A

Redding, California

XS Conventional Gear

Jabiru 3300  

Sensenich R64Z N

Ground Adjustable Prop





Wondering what's for Dinner Tonight? Get new twists on family favorites at AOL Food.

  [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum