  | 
				Matronics Email Lists Web Forum Interface to the Matronics Email Lists   
				 | 
			 
		 
		 
	
		| View previous topic :: View next topic   | 
	 
	
	
		| Author | 
		Message | 
	 
	
		Mike Whisky
 
  
  Joined: 05 Jun 2006 Posts: 336 Location: Switzerland
  | 
		
			
				 Posted: Tue Feb 17, 2009 11:29 am    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				I took the time to really get my workshop cleaned up and while working through my "to be used" parts I came across a 4th push pull cable (cabin heat type). I will have two for cabin heat (rear & front) one for alternative air  for the airbox. So why is there a forth since it came with the kit?
 
 Am I missing something here?
 
 Michael
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 _________________ RV-10 builder (flying)
 
#511 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rene(at)felker.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Tue Feb 17, 2009 11:39 am    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				Carb heat for o-540's  ?
 
 Rene' Felker
 RV-10 N423CF Flying
 801-721-6080
 --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		orchidman
 
 
  Joined: 10 Jul 2006 Posts: 277 Location: Oklahoma City - KRCE
  | 
		
			
				 Posted: Tue Feb 17, 2009 11:45 am    Post subject: Re: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				I have it also.  If you installed the air cut off door in the front of the air box, then you would use it.
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 _________________ Gary Blankenbiller
 
RV10 - # 40674
 
(N2GB Flying) | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Mike Whisky
 
  
  Joined: 05 Jun 2006 Posts: 336 Location: Switzerland
  | 
		
			
				 Posted: Tue Feb 17, 2009 11:49 am    Post subject: Re: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				Ok great thanks guys, that will come as a spare one since I have an IO-540.
 
 Cheers
 Michael
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 _________________ RV-10 builder (flying)
 
#511 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rene(at)felker.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Tue Feb 17, 2009 12:18 pm    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				Also, I used mine for air control to the "new" oil cooler I just put in.
 
 Rene' Felker
 RV-10 N423CF Flying
 801-721-6080
 
 --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rv10free2fly(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Tue Feb 17, 2009 1:39 pm    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				Any pictures of the "new oil cooler" installation please Rene?
   
  Regards
   
  Patrick Pulis
  RV-10 #40299  VH-XPP
  Adelaide, South Australia
 
  
    From: Rene Felker <rene(at)felker.com>
 To: rv10-list(at)matronics.com
 Sent: Wednesday, 18 February, 2009 6:45:04 AM
 Subject: RE: Re: How many push pull contol cables (cabin heat type)
 
 --> RV10-List message posted by: "Rene Felker" <rene(at)felker.com (rene(at)felker.com)>
 
 Also, I used mine for air control to the "new" oil cooler I just put in.
 
 Rene' Felker
 RV-10 N423CF Flying
 801-721-6080
 
 --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rene(at)felker.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Tue Feb 17, 2009 1:50 pm    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				I don’t have any pictures, but the new cooler is the one Alex sells and I put a butterfly valve on the back of the baffling in order to control the airflow.  I can’t remember who I bought the butterfly valve from…..I will have to look that up at home.  
      
 Rene' Felker  
 RV-10 N423CF Flying  
   
 801-721-6080      
 From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Patrick Pulis
  Sent: Tuesday, February 17, 2009 2:36 PM
  To: rv10-list(at)matronics.com
  Subject: Re: Re: How many push pull contol cables (cabin heat type)  
   
   
        
 Any pictures of the "new oil cooler" installation please Rene?  
     
    
     
 Regards  
     
    
     
 Patrick Pulis  
     
 RV-10 #40299  VH-XPP  
     
 Adelaide, South Australia  
     
          
   
 From: Rene Felker <rene(at)felker.com>
  To: rv10-list(at)matronics.com
  Sent: Wednesday, 18 February, 2009 6:45:04 AM
  Subject: RE: Re: How many push pull contol cables (cabin heat type)
  
  --> RV10-List message posted by: "Rene Felker" <rene(at)felker.com (rene(at)felker.com)>
  
  Also, I used mine for air control to the "new" oil cooler I just put in.
  
  Rene' Felker
  RV-10 N423CF Flying
  801-721-6080
  
  --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rv10free2fly(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Tue Feb 17, 2009 3:34 pm    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				Rene, how much was the cooler and did you need to replace both the Vans supplied oil cooler and the mounting box?
   
  Any chance of a contact for Alex please.
   
  Regards
   
    
 Patrick Pulis
   
 RV-10 #40299  VH-XPP
   
 Adelaide, South Australia   
   
 Do Not Archive
  
    From: Rene Felker <rene(at)felker.com>
 To: rv10-list(at)matronics.com
 Sent: Wednesday, 18 February, 2009 8:19:36 AM
 Subject: RE: Re: How many push pull contol cables (cabin heat type)
 
       
 I don’t have any pictures, but the new cooler is the one Alex sells and I put a butterfly valve on the back of the baffling in order to control the airflow.  I can’t remember who I bought the butterfly valve from…..I will have to look that up at home. 
    
 Rene' Felker 
 RV-10 N423CF Flying
  
 801-721-6080   
 From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Patrick Pulis
 Sent: Tuesday, February 17, 2009 2:36 PM
 To: rv10-list(at)matronics.com
 Subject: Re: Re: How many push pull contol cables (cabin heat type)
 
  
     
 Any pictures of the "new oil cooler" installation please Rene?
   
  
   
 Regards
   
  
   
 Patrick Pulis
   
 RV-10 #40299  VH-XPP
   
 Adelaide, South Australia
   
      
  
 From: Rene Felker <rene(at)felker.com>
 To: rv10-list(at)matronics.com
 Sent: Wednesday, 18 February, 2009 6:45:04 AM
 Subject: RE: Re: How many push pull contol cables (cabin heat type)
 
 --> RV10-List message posted by: "Rene Felker" <rene(at)felker.com (rene(at)felker.com)>
 
 Also, I used mine for air control to the "new" oil cooler I just put in.
 
 Rene' Felker
 RV-10 N423CF Flying
 801-721-6080
 
 --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rene(at)felker.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Tue Feb 17, 2009 9:05 pm    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				Got the oil cooler here  
    
 http://www.aviationtechproducts.com/html/engine__parts.html  
    
 $427  
    
 I have not flown with it yet, so I don’t know if it will help my oil heat problem.  In the summer I have to restrict climbs due to oil heat……we will see this year.  
    
 Not wanting the oil to be to cold, I put in this air controller, also have not flown with it in order to check the effectiveness….  
    
 http://www.nonstopaviation.com/rv10-controller-cooler-p-14566.html  
      
 Rene'  
 801-721-6080  
   
    
 --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rv10free2fly(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Tue Feb 17, 2009 10:03 pm    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				Many thanks Rene.
   
  Regards
   
  Pat
   
  Do Not Archive
 
  
    From: Rene <rene(at)felker.com>
 To: rv10-list(at)matronics.com
 Sent: Wednesday, 18 February, 2009 3:33:56 PM
 Subject: RE: Re: How many push pull contol cables (cabin heat type)
 
       
 Got the oil cooler here 
   
 http://www.aviationtechproducts.com/html/engine__parts.html 
   
 $427 
   
 I have not flown with it yet, so I don’t know if it will help my oil heat problem.  In the summer I have to restrict climbs due to oil heat……we will see this year. 
   
 Not wanting the oil to be to cold, I put in this air controller, also have not flown with it in order to check the effectiveness…. 
   
 http://www.nonstopaviation.com/rv10-controller-cooler-p-14566.html 
    
 Rene' 
 801-721-6080
  
   
 --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		jesse(at)saintaviation.co Guest
 
 
 
 
 
  | 
		
			
				 Posted: Wed Feb 18, 2009 5:56 am    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				That oil cooler gives probably about 15-20 degrees cooler oil compared to the standard Van's cooler.  I would consider that a must have if you are in a hot environment.  If you are between heat and cold, then you might want to go with the valve so you can let your oil warm up when it's cold.  It works really well.  When open, it doesn't look like it will restrict airflow much at all, but closing it will let your oil warm up when it's cold.  For those who don't put in the carb heat/alternate air door, you can use the cable that comes with the FWF kit to work this valve.
 
 do not archive
 
  Jesse Saint
 Saint Aviation, Inc.
 jesse(at)saintaviation.com (jesse(at)saintaviation.com)
 Cell: 352-427-0285
 Fax: 815-377-3694
 
  
 
 On Feb 18, 2009, at 12:03 AM, Rene wrote:
 [quote]Got the oil cooler here
 
  http://www.aviationtechproducts.com/html/engine__parts.html
 
  $427
 
  I have not flown with it yet, so I don’t know if it will help my oil heat problem.  In the summer I have to restrict climbs due to oil heat……we will see this year.
 
  Not wanting the oil to be to cold, I put in this air controller, also have not flown with it in order to check the effectiveness….
 
  http://www.nonstopaviation.com/rv10-controller-cooler-p-14566.html
 
  Rene'
 801-721-6080
 
 [b]
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rv10free2fly(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Wed Feb 18, 2009 1:41 pm    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				Many thanks Jesse.
   
  Regards
   
  Pat
  South Oz
   
  Do Not Archive
 
  
    From: Jesse Saint <jesse(at)saintaviation.com>
 To: rv10-list(at)matronics.com
 Sent: Thursday, 19 February, 2009 12:25:01 AM
 Subject: Re: Re: How many push pull contol cables (cabin heat type)
 
 That oil cooler gives probably about 15-20 degrees cooler oil compared to the standard Van's cooler.  I would consider that a must have if you are in a hot environment.  If you are between heat and cold, then you might want to go with the valve so you can let your oil warm up when it's cold.  It works really well.  When open, it doesn't look like it will restrict airflow much at all, but closing it will let your oil warm up when it's cold.  For those who don't put in the carb heat/alternate air door, you can use the cable that  comes with the FWF kit to work this valve. 
 
  do not archive
  
    Jesse Saint
  Saint Aviation, Inc.
  jesse(at)saintaviation.com (jesse(at)saintaviation.com)
  Cell: 352-427-0285
  Fax: 815-377-3694
 
   On Feb 18, 2009, at 12:03 AM, Rene wrote:
  
 
           Make Yahoo!7 your homepage and win a trip to the Quiksilver Pro. [url=http://au.rd.yahoo.com/homepage/mailtagline/*http://au.docs.yahoo.com/homepageset/?p1=other&p2=au&p3=tagline]Find out more[/url]. [quote][b]
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rene(at)felker.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Feb 22, 2009 12:11 pm    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				Here is a picture of the new cooler….looks just like the old cooler and the air controller….  
    
    
      
 Rene'  
 801-721-6080  
   
    
 --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
	
  
	 
	
	
		
	 
	
		|  Description: | 
		
			
		 | 
	 
	
		|  Filesize: | 
		 168.4 KB | 
	 
	
		|  Viewed: | 
		 6524 Time(s) | 
	 
	
		
  
 
  | 
	 
	 
	 
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rv10free2fly(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Feb 22, 2009 1:34 pm    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				Rene', the replaceent cooler just bolts on to the same place as the original Vans cooler?
   
  Regards
   
  Pat
 
  
    From: Rene <rene(at)felker.com>
 To: rv10-list(at)matronics.com
 Sent: Monday, 23 February, 2009 6:39:47 AM
 Subject: RE: Re: How many push pull contol cables (cabin heat type)
 
       
 Here is a picture of the new cooler….looks just like the old cooler and the air controller…. 
   
   
    
 Rene' 
 801-721-6080
  
   
 --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rene(at)felker.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Feb 22, 2009 2:14 pm    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				Yep, it is the same form factor, just has more fins inside.  I will not know until this summer how much it helped the oil temp.  
    
 It only took about 10 minutes to change it out.  If anyone wants a stock cooler cheap….I got one.  
      
 Rene' Felker  
 RV-10 N423CF Flying  
   
 801-721-6080      
 From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Patrick Pulis
  Sent: Sunday, February 22, 2009 2:26 PM
  To: rv10-list(at)matronics.com
  Subject: Re: Re: How many push pull contol cables (cabin heat type)  
   
   
        
 Rene', the replaceent cooler just bolts on to the same place as the original Vans cooler?  
     
    
     
 Regards  
     
    
     
 Pat  
     
          
   
 From: Rene <rene(at)felker.com>
  To: rv10-list(at)matronics.com
  Sent: Monday, 23 February, 2009 6:39:47 AM
  Subject: RE: Re: How many push pull contol cables (cabin heat type)    
 Here is a picture of the new cooler….looks just like the old cooler and the air controller….  
    
    
      
 Rene'  
 801-721-6080  
   
    
 --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rv10free2fly(at)yahoo.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Feb 22, 2009 3:45 pm    Post subject: How many push pull contol cables (cabin heat type) | 
				     | 
			 
			
				
  | 
			 
			
				Thanks Rene'
   
  Do Not Archive
 
  
    From: Rene Felker <rene(at)felker.com>
 To: rv10-list(at)matronics.com
 Sent: Monday, 23 February, 2009 8:43:02 AM
 Subject: RE: Re: How many push pull contol cables (cabin heat type)
 
       
 Yep, it is the same form factor, just has more fins inside.  I will not know until this summer how much it helped the oil temp. 
   
 It only took about 10 minutes to change it out.  If anyone wants a stock cooler cheap….I got one. 
    
 Rene' Felker 
 RV-10 N423CF Flying
  
 801-721-6080   
 From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Patrick Pulis
 Sent: Sunday, February 22, 2009 2:26 PM
 To: rv10-list(at)matronics.com
 Subject: Re: Re: How many push pull contol cables (cabin heat type)
 
  
     
 Rene', the replaceent cooler just bolts on to the same place as the original Vans cooler?
   
  
   
 Regards
   
  
   
 Pat
   
      
  
 From: Rene <rene(at)felker.com>
 To: rv10-list(at)matronics.com
 Sent: Monday, 23 February, 2009 6:39:47 AM
 Subject: RE: RV10-List: Re: How many push pull contol cables (cabin heat type)  
 Here is a picture of the new cooler….looks just like the old cooler and the air controller…. 
   
   
    
 Rene' 
 801-721-6080
  
   
 --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
  
 | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		 | 
	 
 
  
	 
	    
	   | 
	
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
  | 
   
 
  
Powered by phpBB © 2001, 2005 phpBB Group
  
		 |