  | 
				Matronics Email Lists Web Forum Interface to the Matronics Email Lists   
				 | 
			 
		 
		 
	
		| View previous topic :: View next topic   | 
	 
	
	
		| Author | 
		Message | 
	 
	
		Deems Davis
 
 
  Joined: 09 Jan 2006 Posts: 925
 
  | 
		
			
				 Posted: Fri Mar 06, 2009 5:34 pm    Post subject: Another Milestone | 
				     | 
			 
			
				
  | 
			 
			
				Well today marked another pretty big milestone for me. Gary Towner (DAR) 
 drove down from Overgaard today, and performed an inspection of N519PJ. 
 Gary had all of the parperwork ready, except for the affidavit, that I 
 had to have notarized, and we began by completing the required forms. 
 Made appropriate entry in my (new) Airframe log book, and then we moved 
 to the inspection. Gary's primary focus and concern was the flight 
 controls. we began inside of the cockpit, and then proceeded outside to 
 all of the flight surfaces and connections. His next stop was the 
 firewall forward area. I pointed out to him one item I noticed 
 yesterday, where I hadn't sealed (RTV) a firewall passthrough. Gary 
 spent about 1 1/2 hours on the inspection, and didn't note any squawks. 
 We moved back to finalize the A/W certificate, and went through the Ops 
 Limitations. Gary gave me a REALLY big Phase 1 test area. Essentially 
 DVT to Kingman, to Laughlin (Colorado River) down the river to Parker 
 then SouthEast all the way to Casa Grande, then back west of PHX 
 (Goodyear, Glendale) and back to DVT. Gary helped walk me through the 
 repairmans cert application, and then handed me the A/W cert and the Ops 
 Lim and made the official entry in the Airframe logbook.
 1st flight will occur as soon as the FAA sends my medical. My AME said 
 to expect May1 :'(
 
 http://deemsrv10.com/album/Final%20Assembly/slides/DSC07403.html
 Deems Davis # 406
 'Its all done............ period!
 http://deemsrv10.com/
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		dmaib@me.com
 
  
  Joined: 25 Apr 2006 Posts: 455 Location: New Smyrna Beach, Florida
  | 
		
			
				 Posted: Fri Mar 06, 2009 5:43 pm    Post subject: Another Milestone | 
				     | 
			 
			
				
  | 
			 
			
				Congratulations Deems! Great news! Now if OKC will just move along  
 smartly for you............................
 
 David Maib
 
 On Mar 6, 2009, at 8:29 PM, Deems Davis wrote:
 
  
 Well today marked another pretty big milestone for me. Gary Towner  
 (DAR) drove down from Overgaard today, and performed an inspection of  
 N519PJ. Gary had all of the parperwork ready, except for the  
 affidavit, that I had to have notarized, and we began by completing  
 the required forms. Made appropriate entry in my (new) Airframe log  
 book, and then we moved to the inspection. Gary's primary focus and  
 concern was the flight controls. we began inside of the cockpit, and  
 then proceeded outside to all of the flight surfaces and connections.  
 His next stop was the firewall forward area. I pointed out to him one  
 item I noticed yesterday, where I hadn't sealed (RTV) a firewall  
 passthrough. Gary spent about 1 1/2 hours on the inspection, and  
 didn't note any squawks. We moved back to finalize the A/W  
 certificate, and went through the Ops Limitations. Gary gave me a  
 REALLY big Phase 1 test area. Essentially DVT to Kingman, to Laughlin  
 (Colorado River) down the river to Parker then SouthEast all the way  
 to Casa Grande, then back west of PHX (Goodyear, Glendale) and back  
 to DVT. Gary helped walk me through the repairmans cert application,  
 and then handed me the A/W cert and the Ops Lim and made the official  
 entry in the Airframe logbook.
 1st flight will occur as soon as the FAA sends my medical. My AME  
 said to expect May1 :'(
 
 http://deemsrv10.com/album/Final%20Assembly/slides/DSC07403.html
 Deems Davis # 406
 'Its all done............ period!
 http://deemsrv10.com/
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
 
  _________________ David Maib
 
RV-10 #40559
 
New Smyrna Beach, FL | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		bgill1(at)charter.net Guest
 
 
 
 
 
  | 
		
			
				 Posted: Fri Mar 06, 2009 6:35 pm    Post subject: Another Milestone | 
				     | 
			 
			
				
  | 
			 
			
				Congrats Deems...
 
 Many of us have been following along with the build and very excited for
 you - Keep it up!
 
 Byron 
 N253RV assigned - Just need to get it all finished!
 
 --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		gipsowh(at)hotmail.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Fri Mar 06, 2009 6:35 pm    Post subject: Another Milestone | 
				     | 
			 
			
				
  | 
			 
			
				Deems C congrats on your passing the DAR inspection.  I went thru the same exercise 3 weeks ago.  Passed without any real squawks.  I too have a medical issue with OKC and am waiting on their approval.  My AME was a jerk about my medical this time C so he shipped it to OKC without even telling me.  I have a BP problem according to him.  This was in November and I've lost nearly 25 lbs since and my blood pressure is down below FAA maximums.  I've jumped thru hoops with my internist since then and now am waiting for FAA approval on my medical.  Bud Warren has been my test pilot for N730WL.  He flew the first flight last week.  And I can't wait to fly my LS1 powered RV10.  Hope to meet you soon at Oshkosh??
   
  Regards C
   
  Bill Gipson
  N730WL
  
  	  | Quote: | 	 		   Date: Fri C 6 Mar 2009 18:29:48 -0700
  From: deemsdavis(at)cox.net
  To: rv10-list(at)matronics.com
  Subject: Another Milestone
  
  --> RV10-List message posted by: Deems Davis <deemsdavis(at)cox.net>
  
  Well today marked another pretty big milestone for me. Gary Towner (DAR) 
  drove down from Overgaard today C and performed an inspection of N519PJ. 
  Gary had all of the parperwork ready C except for the affidavit C that I 
  had to have notarized C and we began by completing the required forms. 
  Made appropriate entry in my (new) Airframe log book C and then we moved 
  to the inspection. Gary's primary focus and concern was the flight 
  controls. we began inside of the cockpit C and then proceeded outside to 
  all of the flight surfaces and connections. His next stop was the 
  firewall forward area. I pointed out to him one item I noticed 
  yesterday C where I hadn't sealed (RTV) a firewall passthrough. Gary 
  spent about 1 1/2 hours on the inspection C and didn't note any squawks. 
  We moved back to finalize the A/W certificate C and went through the Ops 
  Limitations. Gary gave me a REALLY big Phase 1 test area. Essentially 
  DVT to Kingman C to Laughlin (Colorado River) down the river to Parker 
  then SouthEast all the way to Casa Grande C then back west of PHX 
  (Goodyear C Glendale) and back to DVT. Gary helped walk me through the 
  repairmans cert application C and then handed me the A/W cert and the Ops 
  Lim and made the official entry in the Airframe logbook.
  1st flight will occur as soon as the FAA sends my medical. My AME said 
  to expect May1 :'(
  
  http://deemsrv10.com/album/Final%20Assembly/slides/DSC07403.html
  
  
  Deems Davis # 406
  'Its all done............ period!
  http://deemsrv10.com/
 &==============
 | 	  
 [quote] 
  
  
 Windows Live™: Keep your life in sync.  Check it out.  
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		Kelly McMullen
 
 
  Joined: 16 Apr 2008 Posts: 1188 Location: Sun Lakes AZ
  | 
		
			
				 Posted: Fri Mar 06, 2009 6:54 pm    Post subject: Another Milestone | 
				     | 
			 
			
				
  | 
			 
			
				Congratulations Deem!  I guess you have time to do a few more modifications. 8>)
 
 On Fri, Mar 6, 2009 at 6:29 PM, Deems Davis <deemsdavis(at)cox.net> wrote:
  	  | Quote: | 	 		   
 
  Well today marked another pretty big milestone for me. Gary Towner (DAR)
  drove down from Overgaard today, and performed an inspection of N519PJ. Gary helped walk me through the
  repairmans cert application, and then handed me the A/W cert and the Ops Lim
  and made the official entry in the Airframe logbook.
  1st flight will occur as soon as the FAA sends my medical. My AME said to
  expect May1 :'(
 
  http://deemsrv10.com/album/Final%20Assembly/slides/DSC07403.html
  Deems Davis # 406
  'Its all done............ period!
  http://deemsrv10.com/
 
 | 	 
 
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
 
  _________________ Kelly McMullen
 
A&P/IA, EAA Tech Counselor
 
KCHD | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		bkbrown(at)minetfiber.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Fri Mar 06, 2009 10:39 pm    Post subject: Another Milestone | 
				     | 
			 
			
				
  | 
			 
			
				I know how that all feels...and it all feels good.  Congratulations Deems.
 
 Bob Brown
 
 --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		geoff Combs
 
 
  Joined: 04 Jan 2008 Posts: 10
 
  | 
		
			
				 Posted: Sat Mar 07, 2009 3:44 pm    Post subject: Re: Another Milestone | 
				     | 
			 
			
				
  | 
			 
			
				I can't wait to have that same smile on my face. Great airplane Deems.
 Congratulations a job well done.
 
 Geoff
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
 
  _________________ Build QB RV-10 N829GW | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		etandrews(at)westnet.com. Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sat Mar 07, 2009 4:34 pm    Post subject: Another Milestone | 
				     | 
			 
			
				
  | 
			 
			
				Fantastic photo and result Deems!
 
 Evan & Tania Andrews
 40379 Flying
 
 --
 
  |  | - The Matronics RV10-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV10-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		 | 
	 
 
  
	 
	    
	   | 
	
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
  | 
   
 
  
Powered by phpBB © 2001, 2005 phpBB Group
  
		 |