Matronics Email Lists :: View topic - W-1013A aileron hinge brackets warped

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

W-1013A aileron hinge brackets warped

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

william(at)gbta.net
Guest

Posted: Sat Mar 14, 2009 3:29 pm Post subject: W-1013A aileron hinge brackets warped

I started work on the rear wing spars today and  noticed that the w-1013a aileron hinge brackets are warped.  With them  lying flat on the table there's 1/16-3/32" gap in the center off the table on  all 4 of them.  Has anybody else run into this problem.  Looks like it  might have happened when they were "stamped" out.  Obviously I'll wait 'til  monday and see what Vans has to say but does anybody else have any thoughts on  this.  Surely it's not wise to use them like this, or is it???

  

 Anyhow, pictures are attached.

  

 Thanks in advance,

 Bill Britton

 RV-10 #40137

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

100_3679[1].jpg

Description:

Filesize:

750.92 KB

Viewed:

3461 Time(s)

100_3680[1].jpg

Description:

Filesize:

545.42 KB

Viewed:

3461 Time(s)

Strasnuts

Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT

Posted: Sat Mar 14, 2009 4:09 pm Post subject: W-1013A aileron hinge brackets warped

I would say, treat it as the horizontal tabs that  stick up from the tailcone, beat on them in a vice with a rubber mallet to  straighten them.

 [quote]   ---

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours

rnewman(at)tcwtech.com
Guest

Posted: Sat Mar 14, 2009 4:42 pm Post subject: W-1013A aileron hinge brackets warped

I vaguely remember the same issue (I'm kit  #40176),   I reasonably sure I "flatened" them back out with a little  vise and clamp action.

  

 -Bob Newman

  

  

 [quote]   ---

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Ron B.

Joined: 17 Feb 2009
Posts: 103
Location: Nova Scotia

Posted: Sat Mar 14, 2009 4:50 pm Post subject: Re: W-1013A aileron hinge brackets warped

Mine were like your's, I straightened them.

Ron

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Tim Olson

Joined: 25 Jan 2007
Posts: 2882

Posted: Sat Mar 14, 2009 6:36 pm Post subject: W-1013A aileron hinge brackets warped

Yep, perfectly normal. Just flatten them back out.  They'll straighten

when you rivet them to the other piece anyway.

Tim Olson - RV-10 N104CD - Flying

do not archive

Bill and Tami Britton wrote:

 	  Quote: 	
		   I started work on the rear wing spars today and noticed that the w-1013a 

 aileron hinge brackets are warped.  With them lying flat on the table 

 there's 1/16-3/32" gap in the center off the table on all 4 of them.  

 Has anybody else run into this problem.  Looks like it might have 

 happened when they were "stamped" out.  Obviously I'll wait 'til monday 

 and see what Vans has to say but does anybody else have any thoughts on 

 this.  Surely it's not wise to use them like this, or is it???

  

 Anyhow, pictures are attached.

  

 Thanks in advance,

 Bill Britton

 RV-10 #40137

  

 

 ------------------------------------------------------------------------

 

 

 ------------------------------------------------------------------------

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum