Matronics Email Lists :: View topic - Interior thoughts

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Interior thoughts - Flightline or anything else?

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

rv10rob(at)gmail.com
Guest

Posted: Tue Jun 30, 2009 12:38 pm Post subject: Interior thoughts - Flightline or anything else?

Is Flightline the only game in town when it comes to a full interior for the RV-10?  I'm also curious how their seat upholstry compares to some of the other options.  I can imagine having the seats upholstered professionally (rather than slipping on something from a kit) would look/fit better.

   

 -Rob

  [quote][b]

Lew Gallagher

Joined: 04 Jan 2008
Posts: 402
Location: Greenville , SC

Posted: Tue Jun 30, 2009 1:13 pm Post subject: Interior thoughts - Flightline or anything else?

Hey Rob,

  

 FYI, I also had the same questions, so when the  interior came, I took it to my local street rod upholstery shop to see what he  thought.  He was impressed with the attention to detail and craftsmanship  (he started talking about types of stitching, etc.) and said there was no  way he could compete with the price since he would have to either start from  scratch as a custom job or destroy Flightline's to get a pattern (not an  option!).  That was enough to satisfy my curiosity.  And by the way,  whoever makes the covers, they still have to be "slipped on" -- and they look  terrific.

  

 Later, - Lew

 [quote]   ---

_________________
non-pilot
crazy about building
NOW OFICIALLY BUILDER #40549
Fly off completed !

flysrv10(at)gmail.com
Guest

Posted: Tue Jun 30, 2009 1:46 pm Post subject: Interior thoughts - Flightline or anything else?

I am dropping my plane off to Plane Plastics

http://www.planeplastics.com/ during the first week of August (about a

month) for interior work.  They are using my plane to create the

interior paneling for all RV10s.



I have Oregon Aero seats that I like very much but rest of the

interior is bare.  I am hoping that with Plane Plastics work, the

interior will finally look finished and not far from a Cirrus'

interior.



Aero Classics sells custom carpets for the Rv10 also.  Perhaps with

these three vendors, we will arrive at another viable alternative.



I have copied Chris at Plane Plastics if you need updates and

additional information.



Do not archive



On Tue, Jun 30, 2009 at 4:32 PM, Rob Kochman<rv10rob(at)gmail.com> wrote:

 	  Quote: 	
		   Is Flightline the only game in town when it comes to a full interior for the

 RV-10?  I'm also curious how their seat upholstry compares to some of the

 other options.  I can imagine having the seats upholstered professionally

 (rather than slipping on something from a kit) would look/fit better.



 -Rob




	


-- 

Rob Kermanj

aerosport1

Joined: 07 Nov 2007
Posts: 231

Posted: Tue Jun 30, 2009 2:20 pm Post subject: Re: Interior thoughts - Flightline or anything else?

New RV-10 interior panels coming soon



I am in final development of a complete interior set for the RV-10. It will look more like the Cirrus and will cover all rivets, nuts and bolts. It will 

be able to be left as is in a ABS textured as the airline plastic parts or can be painted with texture left as is or covered with your favorite material. All parts are designed in Cad and fit the RV-10 very good. Side panels will be available from the front all the way to the back baggage compartment bulkhead. Even a cover for right over the baggage door rivet line. 

Also the rear passenger vents will have Automotive type air vents that can be fit into the side panels and will have a slider knob directly in the center so you can open and close the vents easily. The tools are complete from for the rear seats back. We are in the final design stages of the front panels. They will have an area for a cup holder like the Cirrus that pops out and also a spot for a fire extinguisher.



I should have picture of the rear panels in a couple weeks. 



Geoff Combs

_________________
Geoff Combs
RV-10 QB N829GW
Flying 500 hrs
40033

robin1(at)mrmoisture.com
Guest

Posted: Tue Jun 30, 2009 2:44 pm Post subject: Interior thoughts - Flightline or anything else?

One comment... HURRY!  

   

Robin  

Do Not Archive  

   

--

flysrv10(at)gmail.com
Guest

Posted: Tue Jun 30, 2009 3:26 pm Post subject: Interior thoughts - Flightline or anything else?

Where have you been?



What is the delivery time and the projected price?  Do you have any

progress photos?



Do not archive



On Tue, Jun 30, 2009 at 6:20 PM,

aerosport1<g.combs(at)aerosportmodeling.com> wrote:

 	  Quote: 	
		   



 New RV-10 interior panels coming soon



 I am in final development of a complete interior set for the RV-10. It will look more like the Cirrus and will cover all rivets, nuts and bolts. It will

 be able to be left as is in a ABS textured as the airline plastic parts or can be painted with texture left as is or covered with your favorite material. All parts are designed in Cad and fit the RV-10 very good. Side panels will be available from the front all the way to the back baggage compartment bulkhead. Even a cover for right over the baggage door rivet line.

 Also the rear passenger vents will have Automotive type air vents that can be fit into the side panels and will have a slider knob directly in the center so you can open and close the vents easily. The tools are complete from for the rear seats back. We are in the final design stages of the front panels. They will have an area for a cup holder like the Cirrus that pops out and also a spot for a fire extinguisher.



 I should have picture of the rear panels in a couple weeks.



 Geoff Combs



 --------

 Geoff Combs

  RV-10 QB N829GW

 Finishing





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p 50850#250850




	


-- 

Rob Kermanj

coop85(at)verizon.net
Guest

Posted: Tue Jun 30, 2009 4:13 pm Post subject: Interior thoughts - Flightline or anything else?

Rob,  

    I went with Flightline for everything except the seats.  I got the seats covered by a local guy that does hotrod upholstery and he did a great job at a much better price (although still not cheap).  You might want to look into options like that.  The flightline interior fit like a glove and was well worth it thanks to the ease of installation.  

   

The only problem I’ve had with the interior is the strip you place around the windows seems to have shrunk at little and therefore caused the glue to fail.  I’ll need to get a new set of the stuff to try again, anyone else have this problem?  

   

Marcus  

40286  

Do not archive  

     

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Rob Kochman

 Sent: Tuesday, June 30, 2009 4:32 PM

 To: rv10-list(at)matronics.com

 Subject: Interior thoughts - Flightline or anything else?  

  

     

Is Flightline the only game in town when it comes to a full interior for the RV-10?  I'm also curious how their seat upholstry compares to some of the other options.  I can imagine having the seats upholstered professionally (rather than slipping on something from a kit) would look/fit better.  

    

   

    

-Rob  

   	  Quote: 	
		    http://www.matronics.com/Navigator?RV10-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9

        [quote][b]

rv10free2fly(at)yahoo.com
Guest

Posted: Tue Jun 30, 2009 5:14 pm Post subject: Interior thoughts - Flightline or anything else?

Bring it on!

  

 Look forward to seeing the pictures.  Any idea of weight Geoff?

  

 Patrick Pulis

  

 Do Not Archive



 

   From: Robin Marks <robin1(at)mrmoisture.com>

To: rv10-list(at)matronics.com

Sent: Wednesday, 1 July, 2009 8:09:47 AM

Subject: RE: Re: Interior thoughts - Flightline or anything else?



      

One comment... HURRY! 

  

Robin 

Do Not Archive 

  

--

rv(at)thelefflers.com
Guest

Posted: Tue Jun 30, 2009 5:36 pm Post subject: Interior thoughts - Flightline or anything else?

Geoff and Aerosport Products will have product shortly too.  I know that

Geoff is working hard to make sure that he has new product at OSH to show

folks.  He'll be at RV-10 HQ all week.  You've seen his carbon fiber panel

that Stein is selling.  His other products are of the same quality.



--

rene(at)felker.com
Guest

Posted: Tue Jun 30, 2009 5:44 pm Post subject: Interior thoughts - Flightline or anything else?

Yep, it shrinks.  I glued one piece twice.  I love Abbey’s work, but need to find another trim solution…….but then again, flying is fun and who cares if the trim falls off.  J   

     

Rene'  

801-721-6080  

  

   

--

gengrumpy(at)aol.com
Guest

Posted: Tue Jun 30, 2009 9:16 pm Post subject: Interior thoughts - Flightline or anything else?

Where were your ideas for us early builders???? (just kidding)



grumpy



do not archive



On Jun 30, 2009, at 5:20 PM, aerosport1 wrote:



 	  Quote: 	
		   

 >



 New RV-10 interior panels coming soon



 I am in final development of a complete interior set for the RV-10.  

 It will look more like the Cirrus and will cover all rivets, nuts  

 and bolts. It will

 be able to be left as is in a ABS textured as the airline plastic  

 parts or can be painted with texture left as is or covered with your  

 favorite material. All parts are designed in Cad and fit the RV-10  

 very good. Side panels will be available from the front all the way  

 to the back baggage compartment bulkhead. Even a cover for right  

 over the baggage door rivet line.

 Also the rear passenger vents will have Automotive type air vents  

 that can be fit into the side panels and will have a slider knob  

 directly in the center so you can open and close the vents easily.  

 The tools are complete from for the rear seats back. We are in the  

 final design stages of the front panels. They will have an area for  

 a cup holder like the Cirrus that pops out and also a spot for a  

 fire extinguisher.



 I should have picture of the rear panels in a couple weeks.



 Geoff Combs



 --------

 Geoff Combs

 RV-10 QB N829GW

 Finishing





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p 50850#250850

flysrv10(at)gmail.com
Guest

Posted: Wed Jul 01, 2009 1:27 pm Post subject: Interior thoughts - Flightline or anything else?

pictures, pictures!



On Tue, Jun 30, 2009 at 6:20 PM,

aerosport1<g.combs(at)aerosportmodeling.com> wrote:

 	  Quote: 	
		   



 New RV-10 interior panels coming soon



 I am in final development of a complete interior set for the RV-10. It will look more like the Cirrus and will cover all rivets, nuts and bolts. It will

 be able to be left as is in a ABS textured as the airline plastic parts or can be painted with texture left as is or covered with your favorite material. All parts are designed in Cad and fit the RV-10 very good. Side panels will be available from the front all the way to the back baggage compartment bulkhead. Even a cover for right over the baggage door rivet line.

 Also the rear passenger vents will have Automotive type air vents that can be fit into the side panels and will have a slider knob directly in the center so you can open and close the vents easily. The tools are complete from for the rear seats back. We are in the final design stages of the front panels. They will have an area for a cup holder like the Cirrus that pops out and also a spot for a fire extinguisher.



 I should have picture of the rear panels in a couple weeks.



 Geoff Combs



 --------

 Geoff Combs

  RV-10 QB N829GW

 Finishing





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p 50850#250850




	


-- 

Rob Kermanj

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum