 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
partner14
Joined: 12 Jan 2008
Posts: 540
Location: Granbury Texas
|
 Posted: Sat Sep 19, 2009 8:01 am Post subject: Rivet direction? Important comment!!!! |
 |
|
Hey guys, can we follow the new guys lead (gosh, it's kind of nice NOT to be the new guy anymore) and put our address and maybe a phone number on the bottom of each email. It sure would make it easier to contact each other for both direct questions/responses, and linking up on cross country flights. What do ya think?
Don McDonald
Lincoln CA LHM
916-801-8402
--- On Thu, 9/17/09, Sam Clark <helosammy(at)gmail.com> wrote:
| Quote: |
From: Sam Clark <helosammy(at)gmail.com>
Subject: Rivet direction?
To: rv10-list(at)matronics.com
Date: Thursday, September 17, 2009, 6:51 PM
Hello RV-10 builders,
I have just started building. I pretty much jumped right in with both feet and it seems to be going well so far. I have finished the vert stab and am getting ready to start riveting the rudder. I started on the horizontal stab spars while waiting for a replacement rudder stiffener and have come across a bit of a perplexing question, how do I know which way to orient the rivets? It isn’t really clear in the plans, I think they should probably all go the same direction so the side I countersink gives a pretty good clue to the direction a flush rivet goes. Am I correct in thinking they all go the same direction or does it matter? I know for the trailing edges I should alternate direction to help keep things straight. Any insight would help, thanks in advance.
Sam Clark
Lexington Park, MD
| Quote: |
get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List
=nofollow>http://forums.matronics.com
blank rel=nofollow>http://www.matronics.com/contribution
|
|
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Don A. McDonald
40636 |
|
| Back to top |
|
 |
dlm46007(at)cox.net
Guest
|
| Posted: Sat Sep 19, 2009 8:55 am Post subject: Rivet direction? Important comment!!!! |
|
|
I usually contact offlist if I offer the telephone number; putting them out each time will provide a lot of unwanted calls from outside the list. If you doubt, just Google an RV10 topic and watch the RV10list emails pop up.
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Don McDonald
Sent: Saturday, September 19, 2009 8:58 AM
To: rv10-list(at)matronics.com
Subject: Re: Rivet direction? Important comment!!!!
Hey guys, can we follow the new guys lead (gosh, it's kind of nice NOT to be the new guy anymore) and put our address and maybe a phone number on the bottom of each email. It sure would make it easier to contact each other for both direct questions/responses, and linking up on cross country flights. What do ya think?
Don McDonald
Lincoln CA LHM
916-801-8402
--- On Thu, 9/17/09, Sam Clark <helosammy(at)gmail.com> wrote:
| Quote: |
From: Sam Clark <helosammy(at)gmail.com>
Subject: Rivet direction?
To: rv10-list(at)matronics.com
Date: Thursday, September 17, 2009, 6:51 PM
UNKNOWN { FONT-FAMILY: "Cambria Math"; panose-1: 2 4 5 3 5 4 6 3 2 4 } UNKNOWN { FONT-FAMILY: Calibri; panose-1: 2 15 5 2 2 2 4 3 2 4 } #yiv1363317664 #yiv1363317664 P.MsoNormal { FONT-SIZE: 11pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Calibri", "sans-serif" } #yiv1363317664 LI.MsoNormal { FONT-SIZE: 11pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Calibri", "sans-serif" } #yiv1363317664 DIV.MsoNormal { FONT-SIZE: 11pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Calibri", "sans-serif" } #yiv1363317664 A:link { COLOR: blue; TEXT-DECORATION: underline } #yiv1363317664 SPAN.MsoHyperlink { COLOR: blue; TEXT-DECORATION: underline } #yiv1363317664 A:visited { COLOR: purple; TEXT-DECORATION: underline } #yiv1363317664 SPAN.MsoHyperlinkFollowed { COLOR: purple; TEXT-DECORATION: underline } #yiv1363317664 SPAN.EmailStyle17 { COLOR: windowtext; FONT-FAMILY: "Calibri", "sans-serif" } #yiv1363317664 .MsoChpDefault { } UNKNOWN { MARGIN: 1in } #yiv1363317664 DIV.Section1 { }
Hello RV-10 builders,
I have just started building. I pretty much jumped right in with both feet and it seems to be going well so far. I have finished the vert stab and am getting ready to start riveting the rudder. I started on the horizontal stab spars while waiting for a replacement rudder stiffener and have come across a bit of a perplexing question, how do I know which way to orient the rivets? It isn’t really clear in the plans, I think they should probably all go the same direction so the side I countersink gives a pretty good clue to the direction a flush rivet goes. Am I correct in thinking they all go the same direction or does it matter? I know for the trailing edges I should alternate direction to help keep things straight. Any insight would help, thanks in advance.
Sam Clark
Lexington Park, MD
| Quote: |
get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List
=nofollow>http://forums.matronics.com
blank rel=nofollow>http://www.matronics.com/contribution
|
|
[quote]
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rv10builder(at)verizon.ne
Guest
|
| Posted: Sat Sep 19, 2009 9:16 am Post subject: Rivet direction? Important comment!!!! |
|
|
Don;
I might suggest we use Tim Olson's builder (secure) site for this. Anything that we publish here remains in the public domain for a long time. The numbers (address and phone) are on his site already. If you don’t have access (for builders and fliers only) contact Tim.
Great idea however!
Pascal
From: Don McDonald (building_partner(at)yahoo.com)
Sent: Saturday, September 19, 2009 8:58 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: Rivet direction? Important comment!!!!
Hey guys, can we follow the new guys lead (gosh, it's kind of nice NOT to be the new guy anymore) and put our address and maybe a phone number on the bottom of each email. It sure would make it easier to contact each other for both direct questions/responses, and linking up on cross country flights. What do ya think?
Don McDonald
Lincoln CA LHM
916-801-8402
--- On Thu, 9/17/09, Sam Clark <helosammy(at)gmail.com> wrote:
| Quote: |
From: Sam Clark <helosammy(at)gmail.com>
Subject: Rivet direction?
To: rv10-list(at)matronics.com
Date: Thursday, September 17, 2009, 6:51 PM
Hello RV-10 builders,
I have just started building. I pretty much jumped right in with both feet and it seems to be going well so far. I have finished the vert stab and am getting ready to start riveting the rudder. I started on the horizontal stab spars while waiting for a replacement rudder stiffener and have come across a bit of a perplexing question, how do I know which way to orient the rivets? It isn’t really clear in the plans, I think they should probably all go the same direction so the side I countersink gives a pretty good clue to the direction a flush rivet goes. Am I correct in thinking they all go the same direction or does it matter? I know for the trailing edges I should alternate direction to help keep things straight. Any insight would help, thanks in advance.
Sam Clark
Lexington Park, MD
| Quote: |
get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List
=nofollow>http://forums.matronics.com
blank rel=nofollow>http://www.matronics.com/contribution
|
|
[quote]
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rv(at)thelefflers.com
Guest
|
| Posted: Sat Sep 19, 2009 10:48 am Post subject: Rivet direction? Important comment!!!! |
|
|
Don,
A better idea is to encourage everyone to register on Tim’s site, where contact information is secure. I have no problem if any new RV-10 builder gives me a call looking to get questions answered, but I prefer to not post my unlisted phone number on a public forum.
Bob
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Don McDonald
Sent: Saturday, September 19, 2009 11:58 AM
To: rv10-list(at)matronics.com
Subject: Re: Rivet direction? Important comment!!!!
Hey guys, can we follow the new guys lead (gosh, it's kind of nice NOT to be the new guy anymore) and put our address and maybe a phone number on the bottom of each email. It sure would make it easier to contact each other for both direct questions/responses, and linking up on cross country flights. What do ya think?
Don McDonald
Lincoln CA LHM
916-801-8402
--- On Thu, 9/17/09, Sam Clark <helosammy(at)gmail.com> wrote:
| Quote: |
From: Sam Clark <helosammy(at)gmail.com>
Subject: Rivet direction?
To: rv10-list(at)matronics.com
Date: Thursday, September 17, 2009, 6:51 PM
Hello RV-10 builders,
I have just started building. I pretty much jumped right in with both feet and it seems to be going well so far. I have finished the vert stab and am getting ready to start riveting the rudder. I started on the horizontal stab spars while waiting for a replacement rudder stiffener and have come across a bit of a perplexing question, how do I know which way to orient the rivets? It isn’t really clear in the plans, I think they should probably all go the same direction so the side I countersink gives a pretty good clue to the direction a flush rivet goes. Am I correct in thinking they all go the same direction or does it matter? I know for the trailing edges I should alternate direction to help keep things straight. Any insight would help, thanks in advance.
|
Sam Clark
Lexington Park, MD
| Quote: | | get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List=nofollow>http://forums.matronics.comblank rel=nofollow>http://www.matronics.com/contribution |
0123456789 | Quote: | | get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List |
0 | Quote: | | get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List |
1 | Quote: | | get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List |
2 | Quote: | | get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List |
3 | Quote: | | get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List |
4
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
partner14
Joined: 12 Jan 2008
Posts: 540
Location: Granbury Texas
|
| Posted: Sat Sep 19, 2009 1:24 pm Post subject: Re: Rivet direction? Important comment!!!! |
|
|
Ok, no telephone numbers.... but boy would it be nice if we new where everybody was from.
Don
Lincoln, CA LHM
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Don A. McDonald
40636 |
|
| Back to top |
|
|
partner14
Joined: 12 Jan 2008
Posts: 540
Location: Granbury Texas
|
| Posted: Mon Sep 21, 2009 2:10 pm Post subject: Rivet direction? Important comment!!!! |
|
|
Gotcha Bob... Pascal already updated me on the list on Tim's site. Maybe we should provide some directions as to how their info can be updated. I know several that are on the list without updated info, and some that aren't even on the list.
Thanks again, Don
--- On Sat, 9/19/09, Bob Leffler <rv(at)thelefflers.com> wrote:
| Quote: |
From: Bob Leffler <rv(at)thelefflers.com>
Subject: RE: Rivet direction? Important comment!!!!
To: rv10-list(at)matronics.com
Date: Saturday, September 19, 2009, 9:39 AM
Don,
A better idea is to encourage everyone to register on Tim’s site, where contact information is secure. I have no problem if any new RV-10 builder gives me a call looking to get questions answered, but I prefer to not post my unlisted phone number on a public forum.
Bob
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Don McDonald
Sent: Saturday, September 19, 2009 11:58 AM
To: rv10-list(at)matronics.com
Subject: Re: Rivet direction? Important comment!!!!
Hey guys, can we follow the new guys lead (gosh, it's kind of nice NOT to be the new guy anymore) and put our address and maybe a phone number on the bottom of each email. It sure would make it easier to contact each other for both direct questions/responses, and linking up on cross country flights. What do ya think?
Don McDonald
Lincoln CA LHM
916-801-8402
--- On Thu, 9/17/09, Sam Clark <helosammy(at)gmail.com> wrote:
| Quote: |
From: Sam Clark <helosammy(at)gmail.com>
Subject: Rivet direction?
To: rv10-list(at)matronics.com
Date: Thursday, September 17, 2009, 6:51 PM
Hello RV-10 builders,
I have just started building. I pretty much jumped right in with both feet and it seems to be going well so far. I have finished the vert stab and am getting ready to start riveting the rudder. I started on the horizontal stab spars while waiting for a replacement rudder stiffener and have come across a bit of a perplexing question, how do I know which way to orient the rivets? It isn’t really clear in the plans, I think they should probably all go the same direction so the side I countersink gives a pretty good clue to the direction a flush rivet goes. Am I correct in thinking they all go the same direction or does it matter? I know for the trailing edges I should alternate direction to help keep things straight. Any insight would help, thanks in advance.
|
Sam Clark
Lexington Park, MD
| Quote: | | get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List=nofollow>http://forums.matronics.comblank rel=nofollow>http://www.matronics.com/contribution |
0123456789 | Quote: | | get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List |
0 | Quote: | | get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List |
1 | Quote: | | get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List |
2 | Quote: | | get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List |
3 | Quote: | | get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List |
4
| Quote: | | get=_blank rel=nofollow>http://www.matronics.com/Navigator?RV10-List |
5
|
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Don A. McDonald
40636 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
