Matronics Email Lists :: View topic - New Door Latch Video S.B. replacement

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

New Door Latch Video S.B. replacement
Goto page 1, 2 Next

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

Strasnuts

Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT

Posted: Sat Feb 06, 2010 11:45 am Post subject: New Door Latch Video S.B. replacement

Here are my doors with my new latches installed.  I ran through soooooo many ideas and here is the final one - INSTALLED.



http://www.youtube.com/watch?v=JRF42r5OBhA

_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours

robertbrunk(at)mac.com
Guest

Posted: Sat Feb 06, 2010 12:24 pm Post subject: New Door Latch Video S.B. replacement

Great design. Will this retrofit are they for sale. Can a lock be  

retrofitted? Robert



Sent from my iPhone



Robert E. Brunkenhoefer

Brunkenhoefer Law Firm, P.C.

520 Lawrence St.

Corpus Christi, Texas 78401

Phone: 361-888-8808

Facsimile: 361-888-6753

robert(at)brunklaw.com



On Feb 6, 2010, at 1:45 PM, Strasnuts <sean(at)braunandco.com> wrote:



 	  Quote: 	
		   



 Here are my doors with my new latches installed.  I ran through  

 soooooo many ideas and here is the final one - INSTALLED.



 http://www.youtube.com/watch?v=JRF42r5OBhA



 --------

 Cust. #40936

 RV-10 SB Fuselage

 N801VR reserved





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p 85091#285091

Strasnuts

Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT

Posted: Sat Feb 06, 2010 12:33 pm Post subject: Re: New Door Latch Video S.B. replacement

Thanks Robert.

It could be retro-fitted.  The only new holes are four screw holes, a 5/16 hole to tighten a screw and an opening in the bottom of the door to slide in the mechanism which is about 2-1/8 inches x 3/4 which could be filled in with a fiberglass piece.  Also the rack gears in the stock handle have to be changed out for longer ones.

I'm thinking about making a bunch of these and having the builders install them.  

Haven't thought about cost.

_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours

woxofswa

Joined: 12 Aug 2008
Posts: 349
Location: AZ

Posted: Sat Feb 06, 2010 4:28 pm Post subject: Re: New Door Latch Video S.B. replacement

I like your product.  I could very well be interested in a few months as I don't have my finishing kit yet.  I just got my aerosport overhead duct so it was neat to see that as well.



I don't know what you machining capabilities are, but I have a friend who has a complete commercial machine shop out by SL#2 airport and he is an RV-7 builder/flyer.  I can hook you up with him to crank out some kits if you need.



Myron

602 421 2868

_________________
Myron Nelson
Mesa, AZ
Flew May 10 2014

Kelly McMullen

Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ

Posted: Sat Feb 06, 2010 4:54 pm Post subject: New Door Latch Video S.B. replacement

I like your design A LOT. Would be very interested in obtaining the

extra hardware.



On Sat, Feb 6, 2010 at 1:33 PM, Strasnuts <sean(at)braunandco.com> wrote:

 	  Quote: 	
		   



 Thanks Robert.

 It could be retro-fitted.  The only new holes are four screw holes, a 5/16 hole to tighten a screw and an opening in the bottom of the door to slide in the mechanism which is about 2-1/8 inches x 3/4 which could be filled in with a fiberglass piece.

 I'm thinking about making a bunch of these and having the builders install them.

 Haven't thought about cost.



 --------

 Cust. #40936

 RV-10 SB Fuselage

 N801VR reserved





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p 85102#285102

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD

robertbrunk(at)mac.com
Guest

Posted: Sat Feb 06, 2010 5:26 pm Post subject: New Door Latch Video S.B. replacement

Would you keep me in the loop on this?



Sent from my iPhone



Robert E. Brunkenhoefer

Brunkenhoefer Law Firm, P.C.

520 Lawrence St.

Corpus Christi, Texas 78401

Phone: 361-888-8808

Facsimile: 361-888-6753

robert(at)brunklaw.com



On Feb 6, 2010, at 2:33 PM, Strasnuts <sean(at)braunandco.com> wrote:



 	  Quote: 	
		   



 Thanks Robert.

 It could be retro-fitted.  The only new holes are four screw holes,  

 a 5/16 hole to tighten a screw and an opening in the bottom of the  

 door to slide in the mechanism which is about 2-1/8 inches x 3/4  

 which could be filled in with a fiberglass piece.

 I'm thinking about making a bunch of these and having the builders  

 install them.

 Haven't thought about cost.



 --------

 Cust. #40936

 RV-10 SB Fuselage

 N801VR reserved





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p 85102#285102

Strasnuts

Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT

Posted: Sat Feb 06, 2010 5:46 pm Post subject: New Door Latch Video S.B. replacement

Sure thing. I believe i now have a way to retrofit existing doors that  

only travel 90 to 100 degrees and still work like mine.  It would also  

work for after market handles.



Sent from my iPhone



On Feb 6, 2010, at 18:23, Robert Brunkenhoefer <robertbrunk(at)mac.com>  

wrote:



 	  Quote: 	
		   

 >



 Would you keep me in the loop on this?



 Sent from my iPhone



 Robert E. Brunkenhoefer

 Brunkenhoefer Law Firm, P.C.

 520 Lawrence St.

 Corpus Christi, Texas 78401

 Phone: 361-888-8808

 Facsimile: 361-888-6753

 robert(at)brunklaw.com



 On Feb 6, 2010, at 2:33 PM, Strasnuts <sean(at)braunandco.com> wrote:



> 

>

> Thanks Robert.

> It could be retro-fitted.  The only new holes are four screw holes,  

> a 5/16 hole to tighten a screw and an opening in the bottom of the  

> door to slide in the mechanism which is about 2-1/8 inches x 3/4  

> which could be filled in with a fiberglass piece.

> I'm thinking about making a bunch of these and having the builders  

> install them.

> Haven't thought about cost.

>

> --------

> Cust. #40936

> RV-10 SB Fuselage

> N801VR reserved

>

>

> Read this topic online here:

>

> http://forums.matronics.com/viewtopic.php?p 85102#285102

>

>

_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours

kearney

Joined: 20 Sep 2008
Posts: 563

Posted: Sat Feb 06, 2010 6:23 pm Post subject: New Door Latch Video S.B. replacement

Sean



I am very interested as well.



Cheers



Les



Sent from my iPhone



On 2010-02-06, at 6:43 PM, Seano <sean(at)braunandco.com> wrote:



 	  Quote: 	
		   



 Sure thing. I believe i now have a way to retrofit existing doors  

 that only travel 90 to 100 degrees and still work like mine.  It  

 would also work for after market handles.



 Sent from my iPhone



 On Feb 6, 2010, at 18:23, Robert Brunkenhoefer <robertbrunk(at)mac.com>  

 wrote:



> 

> >

>

> Would you keep me in the loop on this?

>

> Sent from my iPhone

>

> Robert E. Brunkenhoefer

> Brunkenhoefer Law Firm, P.C.

> 520 Lawrence St.

> Corpus Christi, Texas 78401

> Phone: 361-888-8808

> Facsimile: 361-888-6753

> robert(at)brunklaw.com

>

> On Feb 6, 2010, at 2:33 PM, Strasnuts <sean(at)braunandco.com> wrote:

>

>> 

>>

>> Thanks Robert.

>> It could be retro-fitted.  The only new holes are four screw  

>> holes, a 5/16 hole to tighten a screw and an opening in the bottom  

>> of the door to slide in the mechanism which is about 2-1/8 inches  

>> x 3/4 which could be filled in with a fiberglass piece.

>> I'm thinking about making a bunch of these and having the builders  

>> install them.

>> Haven't thought about cost.

>>

>> --------

>> Cust. #40936

>> RV-10 SB Fuselage

>> N801VR reserved

>>

>>

>>

>>

>> Read this topic online here:

>>

>> http://forums.matronics.com/viewtopic.php?p 85102#285102

>>

>>

>>

>>

>>

>>

>>

>>

>>

>>

>

>

Tim Olson

Joined: 25 Jan 2007
Posts: 2882

Posted: Sat Feb 06, 2010 8:14 pm Post subject: New Door Latch Video S.B. replacement

My compliments!!! I'd have to say that is as close to ideal as anyone

could ask for.  I think you did exactly what  99% of the RV-10 owners

would love to have.  That's something that I'd be very happy with.

Wonderful job.  Would love to see the internal mechanism that runs it.



Tim Olson - RV-10 N104CD



Strasnuts wrote:

 	  Quote: 	
		   

 

 Here are my doors with my new latches installed.  I ran through soooooo many ideas and here is the final one - INSTALLED.

 

 

 

 

 

 http://www.youtube.com/watch?v=JRF42r5OBhA

 

 --------

 Cust. #40936

 RV-10 SB Fuselage

 N801VR reserved

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p 85091#285091

velo

Joined: 22 Jul 2009
Posts: 15

Posted: Sat Feb 06, 2010 9:15 pm Post subject: Re: New Door Latch Video S.B. replacement

Sean,



WOW!!!!  You have come up with a great design.  I know we would be very interested in purchasing the mechanism.  We are about ready to start her up.  The design looks like we could retrofit the door any time.  Keep all of us in the loop.



Rick

davidsoutpost(at)comcast.
Guest

Posted: Sat Feb 06, 2010 9:25 pm Post subject: New Door Latch Video S.B. replacement

My fuselage and finish kit will be here in April and I also would be VERY interested in a kit,  or if you could post your design, I can do some light machining and and fab my own.  Keep us posted .



David Clifford



RV-10 In Progress

Empennage Done

Engine Overhauled & Pickled

Closing up The Wings  



---

scottmschmidt(at)yahoo.co
Guest

Posted: Sat Feb 06, 2010 9:28 pm Post subject: New Door Latch Video S.B. replacement

It is very impressive. 

I've attached a picture



Do not achive 

Scott Schmidtscottmschmidt(at)yahoo.com



From: Tim Olson <Tim(at)myrv10.com>

To:  rv10-list(at)matronics.com

Sent: Sat, February 6, 2010 9:09:47 PM

Subject: Re: New Door Latch Video S.B. replacement



 --> RV10-List message posted by: Tim Olson <Tim(at)myrv10.com (Tim(at)myrv10.com)>



My compliments!!! I'd have to say that is as close to ideal as anyone

could ask for.  I think you did exactly what  99% of the RV-10 owners

would love to have.  That's something that I'd be very happy with.

Wonderful job.  Would love to see the internal mechanism that runs it.



Tim Olson - RV-10 N104CD



Strasnuts wrote:

 	  Quote: 	
		   --> RV10-List message posted by: "Strasnuts" <sean(at)braunandco.com (sean(at)braunandco.com)>

 

 Here are my doors with my new latches installed.  I ran through soooooo many ideas and here is the final one - INSTALLED.

seandoorlock.jpg

Description:

Filesize:

17.53 KB

Viewed:

17855 Time(s)

Strasnuts

Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT

Posted: Sat Feb 06, 2010 9:33 pm Post subject: Re: New Door Latch Video S.B. replacement

Thanks Scott for giving it away. I could of retired on this design!!

_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours

Strasnuts

Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT

Posted: Sat Feb 06, 2010 9:37 pm Post subject: Re: New Door Latch Video S.B. replacement

For all of you that are close to installing the doors and want my system, don't cut your rack gears from Vans where they tell you.  Cut them in half, right down the middle or wait for the instructions with my kit.  This way I (or you)can make 180 degrees of travel on your handle.  Retrofit kits will have the option of buying 90 degree kits for already cut racks or 180 degree kits that include new racks for the handles.  The 180 degree kits will cost a little extra for the material.  For those of you who want retrofit kits you will have to decide on whether you want the door to be pulled in before pin penetration and 1-1/4 of pin travel past the door or 90 degree kits that hold the door closed and tight in the middle preventing bulging and the same pin extension.  This goes for after market handles too. You can add my mechanism to your door for a safety and to keep the middle of the door tight.

_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours

robin1(at)mrmoisture.com
Guest

Posted: Sat Feb 06, 2010 11:11 pm Post subject: New Door Latch Video S.B. replacement

I like Scott’s design but feel it needs a backup system.  

   

Robin  

Do Not Archive        

   

 [img]cid:image001.jpg(at)01CAA781.33871130[/img]

image001.jpg

Description:

Filesize:

161.54 KB

Viewed:

17841 Time(s)

bob.kaufmann(at)cox.net
Guest

Posted: Sun Feb 07, 2010 6:05 am Post subject: New Door Latch Video S.B. replacement

I would like a set.



Bob Kaufmann



--

jump2(at)sbcglobal.net
Guest

Posted: Sun Feb 07, 2010 6:24 am Post subject: New Door Latch Video S.B. replacement

I would be very interested in getting one. Let us know what the cost is. 

Patrick Thyssen

n15pt

40257



--- On Sat, 2/6/10, Strasnuts <sean(at)braunandco.com> wrote:

 	  Quote: 	
		  

From: Strasnuts <sean(at)braunandco.com>

Subject: Re: New Door Latch Video S.B. replacement

To: rv10-list(at)matronics.com

Date: Saturday, February 6, 2010, 2:33 PM



--> RV10-List message posted by: "Strasnuts" <[url=/mc/compose?to=sean(at)braunandco.com]sean(at)braunandco.com[/url]>



Thanks Robert.

It could be retro-fitted.  The only new holes are four screw holes, a 5/16 hole to tighten a screw and an opening in the bottom of the door to slide in the  mechanism which is about 2-1/8 inches x 3/4 which could be filled in with a fiberglass piece.

I'm thinking about making a bunch of these and having the builders install them.  

Haven't thought about cost.



--------

Cust. #40936

RV-10 SB Fuselage

N801VR reserved





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=285102#285102

--> ht="http://forums.matronics.com" target="_blank">http://forums.matronics.;          - List Contribution Web Site -

p;                     &nref="http://www.matronics.com/contribution" =======





	
 [quote][b]

strib99

Joined: 08 Oct 2007
Posts: 7

Posted: Mon Feb 08, 2010 8:54 am Post subject: New Door Latch Video S.B. replacement

Please put me on your list.  

   

James  Stribling  

40140   

         

  

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Patrick Thyssen

 Sent: Sunday, February 07, 2010 9:22 AM

 To: rv10-list(at)matronics.com

 Subject: Re: Re: New Door Latch Video S.B. replacement  

  

           

I would be very interested in getting one. Let us   know what the cost is. 

   Patrick Thyssen

   n15pt

   40257

   

   --- On Sat, 2/6/10, Strasnuts <sean(at)braunandco.com>   wrote:   



   From: Strasnuts <sean(at)braunandco.com>

   Subject: Re: New Door Latch Video S.B. replacement

   To: rv10-list(at)matronics.com

   Date: Saturday, February 6, 2010, 2:33 PM      

--> RV10-List message posted by:   "Strasnuts" <sean(at)braunandco.com (sean(at)braunandco.com)>

   

   Thanks Robert.

   It could be retro-fitted.  The only new holes are four screw holes, a   5/16 hole to tighten a screw and an opening in the bottom of the door to   slide in the mechanism which is about 2-1/8 inches x 3/4 which could be   filled in with a fiberglass piece.

   I'm thinking about making a bunch of these and having the builders install   them.  

   Haven't thought about cost.

   

   --------

   Cust. #40936

   RV-10 SB Fuselage

   N801VR reserved

   

   

   

   

   Read this topic online here:

   

   http://forums.matronics.com/viewtopic.php?p=285102#285102

   

   

   

   

   

   

   --> ht="http://forums.matronics.com"   target="_blank">http://forums.matronics.;            - List Contribution Web Site -

   p;                       &nref="http://www.matronics.com/contribution" =======

   

   

   

   

      

   

          	  Quote: 	
		    http://www.matronics.com/Navigator?RV10-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9

       [quote][b]

william(at)gbta.net
Guest

Posted: Mon Feb 08, 2010 9:08 am Post subject: New Door Latch Video S.B. replacement

Add me to your list also.  Would like to know a  ballpark price before committing but this looks like the best solution I've seen  so far.

  

 Bill Britton

 40137

  



  From: James Stribling (jlstrib(at)comcast.net) 

 Sent: Monday, February 08, 2010 10:52 AM

 To: rv10-list(at)matronics.com (rv10-list(at)matronics.com) 

 Subject: RE: Re: New Door Latch Video S.B.  replacement

 



  

Please put me on your  list. 

  

James  Stribling 

40140   

     

 

From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)  [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Patrick Thyssen

Sent: Sunday, February 07, 2010 9:22  AM

To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

Subject: Re: Re: New Door Latch  Video S.B. replacement

 

                    

I would be very interested in getting one. Let us        know what the cost is. 

Patrick Thyssen

n15pt

40257



--- On        Sat, 2/6/10, Strasnuts <sean(at)braunandco.com>        wrote:       



From: Strasnuts        <sean(at)braunandco.com>

Subject: Re: New Door Latch        Video S.B. replacement

To: rv10-list(at)matronics.com

Date: Saturday,        February 6, 2010, 2:33 PM              

--> RV10-List message posted by: "Strasnuts"        <sean(at)braunandco.com (sean(at)braunandco.com)>



Thanks        Robert.

It could be retro-fitted.  The only new holes are four        screw holes, a 5/16 hole to tighten a screw and an opening in the bottom        of the door to slide in the mechanism which is about 2-1/8 inches x 3/4        which could be filled in with a fiberglass piece.

I'm thinking about        making a bunch of these and having the builders install them.         

Haven't thought about cost.



--------

Cust. #40936

RV-10        SB Fuselage

N801VR reserved





Read this topic online        here:



http://forums.matronics.com/viewtopic.php?p=285102#285102

-->        ht="http://forums.matronics.com"        target="_blank">http://forums.matronics.;                 - List Contribution Web Site -

p;                                   &nref="http://www.matronics.com/contribution"        =======



       

  	  Quote: 	
		    http://www.matronics.com/Navigator?RV10-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9

 	  Quote: 	
		  	
0   [quote][b]

Strasnuts

Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT

Posted: Mon Feb 08, 2010 9:47 am Post subject: Re: New Door Latch Video S.B. replacement

I'm excited from all the interest and I am getting the ball rolling for production. I outfitted my second door and it works great.

__________________

_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours Goto page 1, 2 Next
Page 1 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum