Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

GPS antenna mounted to instrument module

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
rparigoris



Joined: 24 Nov 2009
Posts: 780

PostPosted: Mon Feb 08, 2010 11:02 am    Post subject: GPS antenna mounted to instrument module Reply with quote

Hi group. We are working on instrument module at moment.We have a Garmin 296 and was wondering if anyone has mounted the antenna to the underside of the top of the instrument module just about above the gear lever cutout?Bout how far aft of firewall?Any input would be appreciared.Ron Parigoris [quote][b]

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List


Last edited by rparigoris on Sun Feb 14, 2010 6:40 am; edited 1 time in total
Back to top
View user's profile Send private message
Ivor Phillips



Joined: 16 Jan 2006
Posts: 253
Location: London UK

PostPosted: Mon Feb 08, 2010 11:50 am    Post subject: GPS antenna mounted to instrument module Reply with quote

Hi Ron
I have located my two antenna in the roof space between the doors, Garmin 295
and Skyforce 3c, Both work well directly through the roof, No problems with signal strength or Blanking of signal,
Ivor
:
Quote:


Hi group. 
We are working on instrument module at moment.
We have a Garmin 295 and was wondering if anyone has mounted the antenna
to the underside of the top of the instrument module just about above the
gear lever cutout?
Bout how far aft of firewall?
Any input would
be appreciared.
Ron Parigoris


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
mikenjulie.parkin(at)btin
Guest





PostPosted: Mon Feb 08, 2010 12:30 pm    Post subject: GPS antenna mounted to instrument module Reply with quote

I have a skymap 3c with the antenna mounted underneath the top of the instrument panel as you describe. It has worked flawlessly for 8 years.

Regards,

Mike (Finally the weight of the paper has reached the AUW of the aircraft. G-JULZ is at last 'Hot to Trot', just need the weather to agree now'.
Quote:
Hi group.
We are working on instrument module at moment.
We have a Garmin 295 and was wondering if anyone has mounted the antenna
to the underside of the top of the instrument module just about above the
gear lever cutout?
Bout how far aft of firewall?
Any input would
be appreciared.
Ron Parigoris


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
rampil



Joined: 04 May 2007
Posts: 870

PostPosted: Mon Feb 08, 2010 2:45 pm    Post subject: Re: GPS antenna mounted to instrument module Reply with quote

Yes Ron, the CRP of the panel is transparent to GPS unless you re-did
your panel in carbon fiber. The plexi windshield is also transparent to
GPS.

Unless you metalized your firewall, it too is essentially transparent.

GPS Antennas are not supposed to "see" down to the horizon, in fact
most receivers with ignore satellites within 5-10 degrees of the horizon
("the masking angle") by orbital calculation in order to avoid atmospheric
distortions of the signal. Since your engine is below the inside ceiling
of the panel, the existence of the engine is a non-factor as well.

My GPS puck is attached to the ceiling of my panel with industrial grade
double sided foam tape.
Ivor, your solution requires extra length of coax cable and a connection to be broken whenever you need to pull the panel out of the fuse. Extra
coax length and in particular, extra coax connections are extremely hurtful
to GPS signal strength.


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Ira N224XS
Back to top
View user's profile Send private message
mau11(at)free.fr
Guest





PostPosted: Mon Feb 08, 2010 11:05 pm    Post subject: GPS antenna mounted to instrument module Reply with quote

Hello, ron
I install two antennas for my 495 GPS :
The first (Garmin) is bonded inside the skin on the roof of the fuselage between the doors before I dismantling the antenna plastic box, and extracting the electronic element.
The second antenna from Furuno (is exactly same of Garmin) is bonded on the top of panel inside the skin. I send to you pictures of these antennas.
Good day
Michel
Builder 145 - 350 hdv



09-02-2010
mau11
De : rparigor
Date/heure : 08-02-2010 20:11:07
A : Europa
Cc :
Sujet : GPS antenna mounted to instrument module

Hi group.
We are working on instrument module at moment.
We have a Garmin 295 and was wondering if anyone has mounted the antenna to the underside of the top of the instrument module just about above the gear lever cutout?
Bout how far aft of firewall?
Any input would be appreciared.
Ron Parigoris
Quote:


[quote][b]


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
gavanne(at)iconz.co.nz
Guest





PostPosted: Sun Feb 14, 2010 10:25 pm    Post subject: GPS antenna mounted to instrument module Reply with quote

Hi Ron
I have the Garmin 295 panel mounted and have the external aerial on top of the instrument panel looking through the windscreen in about the centre of the panel. Works very well and its slimline shape is not noticeable.

Cheers
Gavin Lee………ZK-EPA


From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of rparigor(at)suffolk.lib.ny.us
Sent: Tuesday, 9 February 2010 7:58 a.m.
To: Europa
Subject: GPS antenna mounted to instrument module


Hi group.
We are working on instrument module at moment.
We have a Garmin 295 and was wondering if anyone has mounted the antenna to the underside of the top of the instrument module just about above the gear lever cutout?
Bout how far aft of firewall?
Any input would be appreciared.
Ron Parigoris
Quote:
http://www.matronics.com/Navigator?Europa-List
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
[quote][b]


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group