 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
rleffler
Joined: 05 Nov 2006
Posts: 680
|
 Posted: Sun Feb 07, 2010 11:59 am Post subject: RV-10 Cutaway Drawing |
 |
|
I don’t know how many folks have followed the Cutaway RV Drawing thread on VAF. (http://www.vansairforce.com/community/showthread.php?t=38927) I have taken an interest and wanted to share with the RV-10 community to gather more interest.
Here is an example of the RV-7A Slider:
[img]cid:image001.jpg(at)01CAA800.6608CE80[/img]
To get a RV-10 version commissioned and started, Tom needs a demonstrated interest from the RV-10 community. I’m interested in getting one and I thought I would post here to encourage others that may be interested to order as well.
To order, just send an email to tjtechart(at)comcast.net (tjtechart(at)comcast.net) and let Tom know which model you want and whether you want a limited edition or an open edition print. If you want an open edition, let us know if you want an 18x24 or 24x36. No money is collected until the project starts.
The following is an overview of what’s involved in the project and the different types of prints available.
Research (approximately 50 hours including travel)
Access to engineering plans and actual RV’s. I have already contacted Vans' Aircraft who have given me a thumbs up "go", and they are willing to provide access to plans. I’m confident there are enough RVs in the Portland area for final close-up access to a finished plane(s).
Hand created draft (about 200 hours)
Pencil the detailed draft. This is the phase that makes my art unique. I do this phase by hand because it adds a unique perspective and fine art quality—like Leonardo DaVinci. Also because it's more like building the real plane, which is essentially what I must do to create these images.
Final details and painting (about 100 hours)
Load the draft into the computer for completion and painting.
Send to the Printer.
Tom will bill the retainer through PayPal once the required number of orders is reached.
Once all retainers (50%) have been received, I will schedule in the project, which will take approximately 8 weeks to complete.
Available prints and pricing:
18" X 24" on archival paper............................................. ...$45.00 +S/H**
24" X 36" on archival paper............................................. ...$65.00 +S/H**
Fine-art 24" X 36" limited edition of 100 *giclee prints..........$200.00 + S/H**
Custom prints: an exclusive cutaway of your personal aircraft with your paint scheme and specific details. By quote only, the price will be determined by the complexity of paint scheme and level of detail desired. A 50% deposit will be required on these special projects to secure a position in the queue. They will be scheduled in the order received after completion. Custom cutaways generally range between $500 - $1500. I have done some of these works for Pitts Model 12 customers and they have been extremely pleased with the final result.
*a giclee is digital print that is the highest quality reproduction available. These are fine-art prints produced on museum quality acid-free paper using non-fading special inks. When framed properly, these prints have non-fading life expectancy of 100 years. These must be printed one at a time at ultra-high resolution for maximum detail. They take about 1 hour each to print and are dazzling.
**Shipping and handling includes actual shipping charge and packing tube. Within the US this is $15.00. Overseas rates vary. (Inquire for rates)
Artwork is always copyrighted with all rights retained by TJTechArt, Inc.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
83.08 KB |
| Viewed: |
9212 Time(s) |
|
_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler |
|
| Back to top |
|
 |
AV8ORJWC
Joined: 13 Jul 2006
Posts: 1149
Location: Aurora, Oregon "Home of VANS"
|
| Posted: Mon Feb 08, 2010 4:47 am Post subject: RV-10 Cutaway Drawing |
|
|
Bob, I am amazed you found Tom and his fine work all the way out here. I have a numbered and autographed version of Delmar Benjamin's one of a kind Bee Gee Racer. For those reading this post, it is unbelievable. I consider it a true investment.
I have already sent my response to Tom, would be glad to put him in touch with a number of the RV-10 builders in this area. I will provide a round trip ticket to get him down to see Deems N519PJ and he might just appreciate getting away from the soggy Pacific NorthWe. for the more temperate Arizona this time of year. He is worth the investment. Count me on board for the full meal 24 x 36" deal. How many do we need to move this project along?
The rest of you and those in Wisconsin who have little wooden painted models on their desk might consider such a great offer.
John Cox
From: Bob Leffler
Sent: Sun 2/7/2010 11:54 AM
To: rv10-list(at)matronics.com
Subject: RV10-List: RV-10 Cutaway Drawing
I don’t know how many folks have followed the Cutaway RV Drawing thread on VAF. (http://www.vansairforce.com/community/showthread.php?t=38927) I have taken an interest and wanted to share with the RV-10 community to gather more interest.
Here is an example of the RV-7A Slider:
[img]cid:image001.jpg(at)01CAA800.6608CE80[/img]
To get a RV-10 version commissioned and started, Tom needs a demonstrated interest from the RV-10 community. I’m interested in getting one and I thought I would post here to encourage others that may be interested to order as well.
To order, just send an email to tjtechart(at)comcast.net (tjtechart(at)comcast.net) and let Tom know which model you want and whether you want a limited edition or an open edition print. If you want an open edition, let us know if you want an 18x24 or 24x36. No money is collected until the project starts.
The following is an overview of what’s involved in the project and the different types of prints available.
Research (approximately 50 hours including travel)
Access to engineering plans and actual RV’s. I have already contacted Vans' Aircraft who have given me a thumbs up "go", and they are willing to provide access to plans. I’m confident there are enough RVs in the Portland area for final close-up access to a finished plane(s).
Hand created draft (about 200 hours)
Pencil the detailed draft. This is the phase that makes my art unique. I do this phase by hand because it adds a unique perspective and fine art quality—like Leonardo DaVinci. Also because it's more like building the real plane, which is essentially what I must do to create these images.
Final details and painting (about 100 hours)
Load the draft into the computer for completion and painting.
Send to the Printer.
Tom will bill the retainer through PayPal once the required number of orders is reached.
Once all retainers (50%) have been received, I will schedule in the project, which will take approximately 8 weeks to complete.
Available prints and pricing:
18" X 24" on archival paper............................................ ...$45.00 +S/H**
24" X 36" on archival paper............................................. ...$65.00 +S/H**
Fine-art 24" X 36" limited edition of 100 *giclee prints.........$200.00 + S/H**
Custom prints: an exclusive cutaway of your personal aircraft with your paint scheme and specific details. By quote only, the price will be determined by the complexity of paint scheme and level of detail desired. A 50% deposit will be required on these special projects to secure a position in the queue. They will be scheduled in the order received after completion. Custom cutaways generally range between $500 - $1500. I have done some of these works for Pitts Model 12 customers and they have been extremely pleased with the final result.
*a giclee is digital print that is the highest quality reproduction available. These are fine-art prints produced on museum quality acid-free paper using non-fading special inks. When framed properly, these prints have non-fading life expectancy of 100 years. These must be printed one at a time at ultra-high resolution for maximum detail. They take about 1 hour each to print and are dazzling.
**Shipping and handling includes actual shipping charge and packing tube. Within the US this is $15.00. Overseas rates vary. (Inquire for rates)
Artwork is always copyrighted with all rights retained by TJTechArt, Inc.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
83.08 KB |
| Viewed: |
9177 Time(s) |
|
|
|
| Back to top |
|
|
rleffler
Joined: 05 Nov 2006
Posts: 680
|
| Posted: Mon Feb 08, 2010 5:04 am Post subject: Re: RV-10 Cutaway Drawing |
|
|
John,
I've been told that Tom looks for about 60 of the giclee prints or several hundred of the standard prints. As I understand, he has about ten orders for the RV-10.
Tom was cc'd on my email, plus I let him know that I was posting to the forum. Hopefully, he'll drop by and add some comments.
bob
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler |
|
| Back to top |
|
|
jdriggs49(at)msn.com
Guest
|
| Posted: Mon Feb 08, 2010 6:13 am Post subject: RV-10 Cutaway Drawing |
|
|
Wow! Where do you sign up for one of these?? Dan
| Quote: | Subject: Re: RV-10 Cutaway Drawing
From: rv(at)thelefflers.com
Date: Mon C 8 Feb 2010 05:04:56 -0800
To: rv10-list(at)matronics.com
--> RV10-List message posted by: "rleffler" <rv(at)thelefflers.com>
John C
I've been told that Tom looks for about 60 of the giclee prints or several hundred of the standard prints. As I understand C he has about ten orders for the RV-10.
Tom was cc'd on my email C plus I let him know that I was posting to the forum. Hopefully C he'll drop by and add some comments.
bob
--------
Bob Leffler
N410BL - Fuselage
RV-10 #40684
mykitlog.com/rleffler
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=285321#285321
=
|
| Quote: |
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now. |
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rleffler
Joined: 05 Nov 2006
Posts: 680
|
| Posted: Mon Feb 08, 2010 6:52 am Post subject: RV-10 Cutaway Drawing |
|
|
To order, just send an email to tjtechart(at)comcast.net (tjtechart(at)comcast.net) Let Tom know which model you want and whether you want a limited edition or an open edition print. If you want an open edition, let us know if you want an 18x24 or 24x36. No money is collected until the project starts.
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Danny Riggs
Sent: Monday, February 08, 2010 9:11 AM
To: rv10-list(at)matronics.com
Subject: RE: Re: RV-10 Cutaway Drawing
Wow! Where do you sign up for one of these?? Dan
> Subject: Re: RV-10 Cutaway Drawing
> From: rv(at)thelefflers.com
> Date: Mon, 8 Feb 2010 05:04:56 -0800
> To: rv10-list(at)matronics.com
>
> --> RV10-List message posted by: "rleffler" <rv(at)thelefflers.com>
>
> John,
>
> I've been told that Tom looks for about 60 of the giclee prints or several hundred of the standard prints. As I understand, he has about ten orders for the RV-10.
>
> Tom was cc'd on my email, plus I let him know that I was posting to the forum. Hopefully, he'll drop by and add some comments.
>
> bob
>
> --------
> Bob Leffler
> N410BL - Fuselage
> RV-10 #40684
> mykitlog.com/rleffler
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=285321#285321
>
=
>
>
>
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now. | Quote: | | http://www.matronics.com/Navigator?RV10-List |
0123456789
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler |
|
| Back to top |
|
|
jdriggs49(at)msn.com
Guest
|
| Posted: Mon Feb 08, 2010 8:26 am Post subject: RV-10 Cutaway Drawing |
|
|
What does he typically charge?
From: rv(at)thelefflers.com
To: rv10-list(at)matronics.com
Subject: RE: Re: RV-10 Cutaway Drawing
Date: Mon C 8 Feb 2010 09:47:42 -0500
.ExternalClass .ecxshape {;} .ExternalClass p.ecxMsoNormal C .ExternalClass li.ecxMsoNormal C .ExternalClass div.ecxMsoNormal {margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman' C'serif';} .ExternalClass a:link C .ExternalClass span.ecxMsoHyperlink {color:blue;text-decoration:underline;} .ExternalClass a:visited C .ExternalClass span.ecxMsoHyperlinkFollowed {color:purple;text-decoration:underline;} .ExternalClass p {margin-right:0in;margin-left:0in;font-size:12.0pt;font-family:'Times New Roman' C'serif';} .ExternalClass code {font-family:'Courier New';} .ExternalClass pre {margin-bottom:.0001pt;font-size:10.0pt;font-family:'Courier New';} .ExternalClass span.ecxHTMLPreformattedChar {font-family:Consolas;} .ExternalClass span.ecxEmailStyle20 {font-family:'Calibri' C'sans-serif';color:#1F497D;} .ExternalClass .ecxMsoChpDefault {font-size:10.0pt;} (at)page Section1 {size:8.5in 11.0in;} .ExternalClass div.ecxSection1 {page:Section1;}
To order C just send an email to tjtechart(at)comcast.net (tjtechart(at)comcast.net) Let Tom know which model you want and whether you want a limited edition or an open edition print. If you want an open edition C let us know if you want an 18x24 or 24x36. No money is collected until the project starts.
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Danny Riggs
Sent: Monday C February 08 C 2010 9:11 AM
To: rv10-list(at)matronics.com
Subject: RE: Re: RV-10 Cutaway Drawing
Wow! Where do you sign up for one of these?? Dan
> Subject: Re: RV-10 Cutaway Drawing
> From: rv(at)thelefflers.com
> Date: Mon C 8 Feb 2010 05:04:56 -0800
> To: rv10-list(at)matronics.com
>
> --> RV10-List message posted by: "rleffler" <rv(at)thelefflers.com>
>
> John C
>
> I've been told that Tom looks for about 60 of the giclee prints or several hundred of the standard prints. As I understand C he has about ten orders for the RV-10.
>
> Tom was cc'd on my email C plus I let him know that I was posting to the forum. Hopefully C he'll drop by and add some comments.
>
> bob
>
> --------
> Bob Leffler
> N410BL - Fuselage
> RV-10 #40684
> mykitlog.com/rleffler
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=285321#285321
>
=
>
>
>
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now. | Quote: | | http://www.matronics.com/Navigator?RV10-List |
0123456789
0 Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. [quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jdriggs49(at)msn.com
Guest
|
| Posted: Mon Feb 08, 2010 8:34 am Post subject: RV-10 Cutaway Drawing |
|
|
OK. Ordered one possilbly two depending on the price. Dan
From: rv(at)thelefflers.com
To: rv10-list(at)matronics.com
Subject: RE: Re: RV-10 Cutaway Drawing
Date: Mon C 8 Feb 2010 09:47:42 -0500
.ExternalClass .ecxshape {;} .ExternalClass p.ecxMsoNormal C .ExternalClass li.ecxMsoNormal C .ExternalClass div.ecxMsoNormal {margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman' C'serif';} .ExternalClass a:link C .ExternalClass span.ecxMsoHyperlink {color:blue;text-decoration:underline;} .ExternalClass a:visited C .ExternalClass span.ecxMsoHyperlinkFollowed {color:purple;text-decoration:underline;} .ExternalClass p {margin-right:0in;margin-left:0in;font-size:12.0pt;font-family:'Times New Roman' C'serif';} .ExternalClass code {font-family:'Courier New';} .ExternalClass pre {margin-bottom:.0001pt;font-size:10.0pt;font-family:'Courier New';} .ExternalClass span.ecxHTMLPreformattedChar {font-family:Consolas;} .ExternalClass span.ecxEmailStyle20 {font-family:'Calibri' C'sans-serif';color:#1F497D;} .ExternalClass .ecxMsoChpDefault {font-size:10.0pt;} (at)page Section1 {size:8.5in 11.0in;} .ExternalClass div.ecxSection1 {page:Section1;}
To order C just send an email to tjtechart(at)comcast.net (tjtechart(at)comcast.net) Let Tom know which model you want and whether you want a limited edition or an open edition print. If you want an open edition C let us know if you want an 18x24 or 24x36. No money is collected until the project starts.
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Danny Riggs
Sent: Monday C February 08 C 2010 9:11 AM
To: rv10-list(at)matronics.com
Subject: RE: Re: RV-10 Cutaway Drawing
Wow! Where do you sign up for one of these?? Dan
> Subject: Re: RV-10 Cutaway Drawing
> From: rv(at)thelefflers.com
> Date: Mon C 8 Feb 2010 05:04:56 -0800
> To: rv10-list(at)matronics.com
>
> --> RV10-List message posted by: "rleffler" <rv(at)thelefflers.com>
>
> John C
>
> I've been told that Tom looks for about 60 of the giclee prints or several hundred of the standard prints. As I understand C he has about ten orders for the RV-10.
>
> Tom was cc'd on my email C plus I let him know that I was posting to the forum. Hopefully C he'll drop by and add some comments.
>
> bob
>
> --------
> Bob Leffler
> N410BL - Fuselage
> RV-10 #40684
> mykitlog.com/rleffler
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=285321#285321
>
=
>
>
>
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now. | Quote: | | http://www.matronics.com/Navigator?RV10-List |
0123456789
0 Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. [quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rv10builder(at)verizon.ne
Guest
|
| Posted: Mon Feb 08, 2010 8:46 am Post subject: RV-10 Cutaway Drawing |
|
|
If one looks at Bob's initial e-mail don’t forget there is lots of information as one scrolls down.
Available prints and pricing:
18" X 24" on archival paper............................................. ...$45.00 +S/H**
24" X 36" on archival paper............................................. ..$65.00 +S/H**
Fine-art 24" X 36" limited edition of 100 *giclee prints..........$200.00 + S/H**
Custom prints: an exclusive cutaway of your personal aircraft with your paint scheme and specific details. By quote only, the price will be determined by the complexity of paint scheme and level of detail desired. A 50% deposit will be required on these special projects to secure a position in the queue. They will be scheduled in the order received after completion. Custom cutaways generally range between $500 - $1500. I have done some of these works for Pitts Model 12 customers and they have been extremely pleased with the final result.
*a giclee is digital print that is the highest quality reproduction available. These are fine-art prints produced on museum quality acid-free paper using non-fading special inks. When framed properly, these prints have non-fading life expectancy of 100 years. These must be printed one at a time at ultra-high resolution for maximum detail. They take about 1 hour each to print and are dazzling.
**Shipping and handling includes actual shipping charge and packing tube. Within the US this is $15.00. Overseas rates vary. (Inquire for rates)
From: Danny Riggs (jdriggs49(at)msn.com)
Sent: Monday, February 08, 2010 8:24 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: RE: Re: RV-10 Cutaway Drawing
What does he typically charge?
From: rv(at)thelefflers.com (rv(at)thelefflers.com)
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: RE: Re: RV-10 Cutaway Drawing
Date: Mon, 8 Feb 2010 09:47:42 -0500
.ExternalClass .ecxshape {;} .ExternalClass p.ecxMsoNormal, .ExternalClass li.ecxMsoNormal, .ExternalClass div.ecxMsoNormal {margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman','serif';} .ExternalClass a:link, .ExternalClass span.ecxMsoHyperlink {color:blue;text-decoration:underline;} .ExternalClass a:visited, .ExternalClass span.ecxMsoHyperlinkFollowed {color:purple;text-decoration:underline;} .ExternalClass p {margin-right:0in;margin-left:0in;font-size:12.0pt;font-family:'Times New Roman','serif';} .ExternalClass code {font-family:'Courier New';} .ExternalClass pre {margin-bottom:.0001pt;font-size:10.0pt;font-family:'Courier New';} .ExternalClass span.ecxHTMLPreformattedChar {font-family:Consolas;} .ExternalClass span.ecxEmailStyle20 {font-family:'Calibri','sans-serif';color:#1F497D;} .ExternalClass .ecxMsoChpDefault {font-size:10.0pt;} (at)page Section1 {size:8.5in 11.0in;} .ExternalClass div.ecxSection1 {page:Section1;}
To order, just send an email to tjtechart(at)comcast.net (tjtechart(at)comcast.net) Let Tom know which model you want and whether you want a limited edition or an open edition print. If you want an open edition, let us know if you want an 18x24 or 24x36. No money is collected until the project starts.
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Danny Riggs
Sent: Monday, February 08, 2010 9:11 AM
To: rv10-list(at)matronics.com
Subject: RE: Re: RV-10 Cutaway Drawing
Wow! Where do you sign up for one of these?? Dan
| Quote: | Subject: Re: RV-10 Cutaway Drawing
From: rv(at)thelefflers.com
Date: Mon, 8 Feb 2010 05:04:56 -0800
To: rv10-list(at)matronics.com
--> RV10-List message posted by: "rleffler" <rv(at)thelefflers.com>
John,
I've been told that Tom looks for about 60 of the giclee prints or several hundred of the standard prints. As I understand, he has about ten orders for the RV-10.
Tom was cc'd on my email, plus I let him know that I was posting to the forum. Hopefully, he'll drop by and add some comments.
bob
--------
Bob Leffler
N410BL - Fuselage
RV-10 #40684
mykitlog.com/rleffler
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=285321#285321
=
|
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now. | Quote: | | http://www.matronics.com/Navigator?RV10-List |
0123456789
0
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. 1 [quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
william(at)gbta.net
Guest
|
| Posted: Mon Feb 08, 2010 9:01 am Post subject: RV-10 Cutaway Drawing |
|
|
Are these a "one time only" offer? I'm considering 3 prints (one of each, including the limited edition) but would like to see what I'm getting before committing to that much money.
Bill
From: Bob Leffler (rv(at)thelefflers.com)
Sent: Sunday, February 07, 2010 1:54 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: RV-10 Cutaway Drawing
I don’t know how many folks have followed the Cutaway RV Drawing thread on VAF. (http://www.vansairforce.com/community/showthread.php?t=38927) I have taken an interest and wanted to share with the RV-10 community to gather more interest.
Here is an example of the RV-7A Slider:
[img]cid:2882A7FB389F47A29F5F390A8A6B5FD1(at)BrittonPC[/img]
To get a RV-10 version commissioned and started, Tom needs a demonstrated interest from the RV-10 community. I’m interested in getting one and I thought I would post here to encourage others that may be interested to order as well.
To order, just send an email to tjtechart(at)comcast.net (tjtechart(at)comcast.net) and let Tom know which model you want and whether you want a limited edition or an open edition print. If you want an open edition, let us know if you want an 18x24 or 24x36. No money is collected until the project starts.
The following is an overview of what’s involved in the project and the different types of prints available.
Research (approximately 50 hours including travel)
Access to engineering plans and actual RV’s. I have already contacted Vans' Aircraft who have given me a thumbs up "go", and they are willing to provide access to plans. I’m confident there are enough RVs in the Portland area for final close-up access to a finished plane(s).
Hand created draft (about 200 hours)
Pencil the detailed draft. This is the phase that makes my art unique. I do this phase by hand because it adds a unique perspective and fine art quality—like Leonardo DaVinci. Also because it's more like building the real plane, which is essentially what I must do to create these images.
Final details and painting (about 100 hours)
Load the draft into the computer for completion and painting.
Send to the Printer.
Tom will bill the retainer through PayPal once the required number of orders is reached.
Once all retainers (50%) have been received, I will schedule in the project, which will take approximately 8 weeks to complete.
Available prints and pricing:
18" X 24" on archival paper............................................. ...$45.00 +S/H**
24" X 36" on archival paper............................................. ...$65.00 +S/H**
Fine-art 24" X 36" limited edition of 100 *giclee prints..........$200.00 + S/H**
Custom prints: an exclusive cutaway of your personal aircraft with your paint scheme and specific details. By quote only, the price will be determined by the complexity of paint scheme and level of detail desired. A 50% deposit will be required on these special projects to secure a position in the queue. They will be scheduled in the order received after completion. Custom cutaways generally range between $500 - $1500. I have done some of these works for Pitts Model 12 customers and they have been extremely pleased with the final result.
*a giclee is digital print that is the highest quality reproduction available. These are fine-art prints produced on museum quality acid-free paper using non-fading special inks. When framed properly, these prints have non-fading life expectancy of 100 years. These must be printed one at a time at ultra-high resolution for maximum detail. They take about 1 hour each to print and are dazzling.
**Shipping and handling includes actual shipping charge and packing tube. Within the US this is $15.00. Overseas rates vary. (Inquire for rates)
Artwork is always copyrighted with all rights retained by TJTechArt, Inc.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
83.08 KB |
| Viewed: |
9153 Time(s) |
|
|
|
| Back to top |
|
|
rleffler
Joined: 05 Nov 2006
Posts: 680
|
| Posted: Mon Feb 08, 2010 10:59 am Post subject: RV-10 Cutaway Drawing |
|
|
Bill,
I suggest you contact Tom directly as well as reading the existing thread on VAF that I included in the original posting. Tom has already delivered multiple RV drawings to date. He’s been very forthright about the process and the cost. I have no doubt that if Tom starts the RV-10, it will be of similar quality as his previous offerings.
The giclee prints are indeed limited to the first one hundred. The others are available as prints as long as Tom wants to sell them.
bob
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Billy & Tami Britton
Sent: Monday, February 08, 2010 11:34 AM
To: rv10-list(at)matronics.com
Subject: Re: RV-10 Cutaway Drawing
Are these a "one time only" offer? I'm considering 3 prints (one of each, including the limited edition) but would like to see what I'm getting before committing to that much money.
Bill
From: Bob Leffler (rv(at)thelefflers.com)
Sent: Sunday, February 07, 2010 1:54 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: RV-10 Cutaway Drawing
I don’t know how many folks have followed the Cutaway RV Drawing thread on VAF. (http://www.vansairforce.com/community/showthread.php?t=38927) I have taken an interest and wanted to share with the RV-10 community to gather more interest.
Here is an example of the RV-7A Slider:
[img]cid:image001.jpg(at)01CAA8C4.DBD890E0[/img]
To get a RV-10 version commissioned and started, Tom needs a demonstrated interest from the RV-10 community. I’m interested in getting one and I thought I would post here to encourage others that may be interested to order as well.
To order, just send an email to tjtechart(at)comcast.net (tjtechart(at)comcast.net) and let Tom know which model you want and whether you want a limited edition or an open edition print. If you want an open edition, let us know if you want an 18x24 or 24x36. No money is collected until the project starts.
The following is an overview of what’s involved in the project and the different types of prints available.
Research (approximately 50 hours including travel)
Access to engineering plans and actual RV’s. I have already contacted Vans' Aircraft who have given me a thumbs up "go", and they are willing to provide access to plans. I’m confident there are enough RVs in the Portland area for final close-up access to a finished plane(s).
Hand created draft (about 200 hours)
Pencil the detailed draft. This is the phase that makes my art unique. I do this phase by hand because it adds a unique perspective and fine art quality—like Leonardo DaVinci. Also because it's more like building the real plane, which is essentially what I must do to create these images.
Final details and painting (about 100 hours)
Load the draft into the computer for completion and painting.
Send to the Printer.
Tom will bill the retainer through PayPal once the required number of orders is reached.
Once all retainers (50%) have been received, I will schedule in the project, which will take approximately 8 weeks to complete.
Available prints and pricing:
18" X 24" on archival paper............................................. ...$45.00 +S/H**
24" X 36" on archival paper............................................. ..$65.00 +S/H**
Fine-art 24" X 36" limited edition of 100 *giclee prints..........$200.00 + S/H**
Custom prints: an exclusive cutaway of your personal aircraft with your paint scheme and specific details. By quote only, the price will be determined by the complexity of paint scheme and level of detail desired. A 50% deposit will be required on these special projects to secure a position in the queue. They will be scheduled in the order received after completion. Custom cutaways generally range between $500 - $1500. I have done some of these works for Pitts Model 12 customers and they have been extremely pleased with the final result.
*a giclee is digital print that is the highest quality reproduction available. These are fine-art prints produced on museum quality acid-free paper using non-fading special inks. When framed properly, these prints have non-fading life expectancy of 100 years. These must be printed one at a time at ultra-high resolution for maximum detail. They take about 1 hour each to print and are dazzling.
**Shipping and handling includes actual shipping charge and packing tube. Within the US this is $15.00. Overseas rates vary. (Inquire for rates)
Artwork is always copyrighted with all rights retained by TJTechArt, Inc.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
83.08 KB |
| Viewed: |
9144 Time(s) |
|
_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler |
|
| Back to top |
|
|
Tim Olson
Joined: 25 Jan 2007
Posts: 2882
|
| Posted: Mon Feb 08, 2010 9:33 pm Post subject: RV-10 Cutaway Drawing |
|
|
FWIW, I just got an email from these people and apparently
they changed their pricing. If I read their email the price
is now $100 for the 24x36 print.
Tim Olson - RV-10 N104CD
do not archive
Bob Leffler wrote:
| Quote: | |To order, just send an email to tjtechart(at)comcast.net
<mailto:tjtechart(at)comcast.net> Let Tom know which model you want and
whether you want a limited edition or an open edition print. If you want
an open edition, let us know if you want an 18x24 or 24x36. No money is
collected until the project starts.|
*From:* owner-rv10-list-server(at)matronics.com
[mailto:owner-rv10-list-server(at)matronics.com] *On Behalf Of *Danny Riggs
*Sent:* Monday, February 08, 2010 9:11 AM
*To:* rv10-list(at)matronics.com
*Subject:* RE: Re: RV-10 Cutaway Drawing
Wow! Where do you sign up for one of these?? Dan
> Subject: Re: RV-10 Cutaway Drawing
> From: rv(at)thelefflers.com
> Date: Mon, 8 Feb 2010 05:04:56 -0800
> To: rv10-list(at)matronics.com
>
>
>
> John,
>
> I've been told that Tom looks for about 60 of the giclee prints or
several hundred of the standard prints. As I understand, he has about
ten orders for the RV-10.
>
> Tom was cc'd on my email, plus I let him know that I was posting to
the forum. Hopefully, he'll drop by and add some comments.
>
> bob
>
> --------
> Bob Leffler
> N410BL - Fuselage
> RV-10 #40684
> mykitlog.com/rleffler
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p 85321#285321
>
=
>
------------------------------------------------------------------------
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now.
* *
* *
**
**
**
**
**
**
*http://www.matronics.com/Navigator?RV10-List*
**
**
**
*http://forums.matronics.com*
**
**
**
**
*http://www.matronics.com/contribution*
**
* *
*
*
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rv10builder(at)verizon.ne
Guest
|
| Posted: Tue Feb 09, 2010 8:27 am Post subject: RV-10 Cutaway Drawing |
|
|
When I viewed the website initially I saw the higher pricing, including the
higher S&H fees, turns out to be a difference of $53 with the new pricing.
| Quote: | From $80 delivered to $132 delivered. I actually thought there was a deal in
this for us with better pricing so I jumped on it.
|
http://www.vansairforce.net/graphics/Cutaway.pdf
--------------------------------------------------
From: "Tim Olson" <Tim(at)myrv10.com>
Sent: Monday, February 08, 2010 9:26 PM
To: <rv10-list(at)matronics.com>
Subject: Re: Re: RV-10 Cutaway Drawing
| Quote: |
FWIW, I just got an email from these people and apparently
they changed their pricing. If I read their email the price
is now $100 for the 24x36 print.
Tim Olson - RV-10 N104CD
do not archive
Bob Leffler wrote:
> |To order, just send an email to tjtechart(at)comcast.net
> <mailto:tjtechart(at)comcast.net> Let Tom know which model you want and
> whether you want a limited edition or an open edition print. If you want
> an open edition, let us know if you want an 18x24 or 24x36. No money is
> collected until the project starts.|
>
> *From:* owner-rv10-list-server(at)matronics.com
> [mailto:owner-rv10-list-server(at)matronics.com] *On Behalf Of *Danny Riggs
> *Sent:* Monday, February 08, 2010 9:11 AM
> *To:* rv10-list(at)matronics.com
> *Subject:* RE: Re: RV-10 Cutaway Drawing
>
> Wow! Where do you sign up for one of these?? Dan
>
>> Subject: Re: RV-10 Cutaway Drawing
>> From: rv(at)thelefflers.com
>> Date: Mon, 8 Feb 2010 05:04:56 -0800
>> To: rv10-list(at)matronics.com
>>
>>
>>
>> John,
>>
>> I've been told that Tom looks for about 60 of the giclee prints or
> several hundred of the standard prints. As I understand, he has about ten
> orders for the RV-10.
>>
>> Tom was cc'd on my email, plus I let him know that I was posting to
> the forum. Hopefully, he'll drop by and add some comments.
>>
>> bob
>>
>> --------
>> Bob Leffler
>> N410BL - Fuselage
>> RV-10 #40684
>> mykitlog.com/rleffler
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p 85321#285321
>>
> =
>>
>>
>>
>
> ------------------------------------------------------------------------
>
> Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up
> now.
>
> * *
>
> * *
>
> **
>
> **
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/Navigator?RV10-List*
>
> **
>
> **
>
> **
>
> *http://forums.matronics.com*
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/contribution*
>
> **
>
> * *
>
> *
> *
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
TJTECHART
Joined: 09 Feb 2010
Posts: 1
Location: Portland, Oregon
|
| Posted: Wed Feb 10, 2010 3:06 pm Post subject: Re: RV-10 Cutaway Drawing |
|
|
Hello to everyone - and thank you Bob and John for bringing Tom's cutaway illustrations to the attention of this forum. We are receiving quite a bit of activity from members.
I am attaching a PDF of Tom's cutaway portfolio, which includes current information. The information included in Bob's original post was from our first project, over a year ago when we were still quite naive. Tom comes from a commercial art background where there is one customer for one print and it was our first attempt at responding to a group request to commission a project. In the last year we've learned a lot and have restructured our pricing to be more realistic to support a six month project with high printing and administration costs. We still think it's a great deal, and hope you do too. We both thoroughly enjoy working with the RV community and Tom is excited about the possibility of working on an RV-10 project.
If you would like to place an advance order to help commission the RV-10 project, please send an email to TJTechart(at)comcast.net and let us know what type of print you would like to order. Once we get enough orders, we will notify everyone and bill for the retainers to commission the project.
Thank you. Nina Vaught
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
| Tom Johnson's Cutaway Illustrations |
|
Download |
| Filename: |
RV Cutaway Illustrations by Tom JohnsonFeb_2010.pdf |
| Filesize: |
818.67 KB |
| Downloaded: |
1029 Time(s) |
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
