Matronics Email Lists :: View topic - Rear headset jacks on torque tube covers

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Rear headset jacks on torque tube covers

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

rv10rob(at)gmail.com
Guest

Posted: Mon Mar 15, 2010 11:18 pm Post subject: Rear headset jacks on torque tube covers

Has anyone mounted their rear headset jacks on the flap torque tube covers, right next to the tunnel?  Seems like a good location to me, where the wires don't block the doors and the connectors are out of the way.  Anyone have any comments/suggestions?

   

 Thanks..

  

 -Rob

-- 

Rob Kochman

RV-10 "Finishing" Kit

Woodinville, WA (near Seattle)

http://kochman.net/N819K



  [quote][b]

johngoodman

Joined: 18 Sep 2006
Posts: 530
Location: GA

Posted: Tue Mar 16, 2010 5:27 am Post subject: Re: Rear headset jacks on torque tube covers

Rob,

I don't see anything wrong with it except when you need to remove the cover to take out the front seats. However, I just noticed a post with a mod to the seat rails that would solve that problem.

John

_________________
#40572 Phase One complete in 2011

AirMike

Joined: 27 Feb 2007
Posts: 514
Location: Nevada

Posted: Tue Mar 16, 2010 6:51 am Post subject: Rear headset jacks on torque tube covers

Put mine on the "armrests" - seemed easier for maintenance.

_________________
See you OSH '18
Q/B - sold.

pitts_pilot(at)bellsouth.
Guest

Posted: Tue Mar 16, 2010 12:52 pm Post subject: Rear headset jacks on torque tube covers

Rob Kochman wrote:  	  Quote: 	
		     Has anyone mounted their rear headset jacks on the flap torque tube covers, right next to the tunnel?  Seems like a good location to me, where the wires don't block the doors and the connectors are out of the way.  Anyone have any comments/suggestions?

 	
 I mounted my HS jacks in the panel (L & R sides like normal) before I changed my mind and mounted them in the tunnel between the seats.  I plan on mounting the 't-bar' for the front seats in the forward part of my overhead console and the aft one just above the seat crossbar.  

 I think putting the HSs down near the floor would subject them to being stepped on ..... or the cords ...... causing damage.  I'd rethink that location.

 Linn

 

 [quote]    

   Thanks..

    

   -Rob   

 -- 

 Rob Kochman

 RV-10 "Finishing" Kit

 Woodinville, WA (near Seattle)

   http://kochman.net/N819K

   

    	  Quote: 	
		  



 href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List

 href="http://forums.matronics.com">http://forums.matronics.com

 href="http://www.matronics.com/contribution">http://www.matronics.com/contribution



	
 [b]

conradb

Joined: 02 Jun 2008
Posts: 11
Location: warner robins, georgia

Posted: Tue Mar 16, 2010 1:34 pm Post subject: Re: Rear headset jacks on torque tube covers

Try mounting them in the rear arm rests using the specially designed recessed holder that you can purchase for $16.00 at Spruces.

Section_OP37_WIRING_HARNESS_Page37-7_step_4.jpg

Description:

Filesize:

26.6 KB

Viewed:

9696 Time(s)

_________________
Conrad Booze
P. O. Box 7028
Warner Robins, GA. 31095
(478)-335-4264
conradbooze@cox.net

Jim Combs

Joined: 24 Jan 2010
Posts: 141
Location: Lexington, Ky

Posted: Tue Mar 16, 2010 2:02 pm Post subject: Rear headset jacks on torque tube covers

I mounted my jacks along with a power plug and entertainment jack (1/8") in the tunnel cover between the seat bottoms.



On Tue, Mar 16, 2010 at 1:42 AM, Rob Kochman <rv10rob(at)gmail.com (rv10rob(at)gmail.com)> wrote:

 [quote]Has anyone mounted their rear headset jacks on the flap torque tube covers, right next to the tunnel?  Seems like a good location to me, where the wires don't block the doors and the connectors are out of the way.  Anyone have any comments/suggestions?

    

 Thanks..

  

 -Rob

-- 

Rob Kochman

RV-10 "Finishing" Kit

Woodinville, WA (near Seattle)

http://kochman.net/N819K



   	  Quote: 	
		  



get="_blank">http://www.matronics.com/Navigator?RV10-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	
[b]

_________________
RV-10 -> N312F - Flying as of 12/2008

LarryRosen

Joined: 16 Jan 2006
Posts: 415
Location: Medford, NJ

Posted: Tue Mar 16, 2010 5:13 pm Post subject: Rear headset jacks on torque tube covers

Conrad,

Would you share pictures of your installation?



Larry Rosen



conradb wrote:

 	  Quote: 	
		   



 Try mounting them in the rear arm rests using the specially designed recessed holder that you can purchase for $16.00 at Spruces.



 --------

 Conrad Booze

 Sr. Engineer 

 P. O. Box 7028

 Warner Robins, GA. 31095

 (478)-335-4264

 conradbooze(at)cox.net





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=290505#290505





 Attachments: 



 http://forums.matronics.com//files/section_op37_wiring_harness_page37_7_step_4_144.jpg

_________________
Larry Rosen
#40356
N205EN (reserved)
<http>

dlm46007(at)cox.net
Guest

Posted: Tue Mar 16, 2010 5:14 pm Post subject: Rear headset jacks on torque tube covers

The torque tube covers need to come off for inspection; do you  want to disconnect each time?

   From: owner-rv10-list-server(at)matronics.com  [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Rob  Kochman

Sent: Monday, March 15, 2010 10:43 PM

To:  rv10-list(at)matronics.com

Subject: Rear headset jacks on  torque tube covers

 Has anyone mounted their rear headset jacks on the flap torque tube covers,  right next to the tunnel?  Seems like a good location to me, where the  wires don't block the doors and the connectors are out of the way.  Anyone  have any comments/suggestions?

 Thanks..

 -Rob

-- 

Rob Kochman

RV-10 "Finishing"  Kit

Woodinville, WA (near Seattle)

http://kochman.net/N819K

[quote]

href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List

href="http://forums.matronics.com">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/c

[b]

chuck(at)chuckdirect.com
Guest

Posted: Wed Mar 17, 2010 12:54 am Post subject: Rear headset jacks on torque tube covers

--

IMG_0530_(800x600).jpg

Description:

Filesize:

122.08 KB

Viewed:

9672 Time(s)

conradb

Joined: 02 Jun 2008
Posts: 11
Location: warner robins, georgia

Posted: Wed Mar 17, 2010 12:34 pm Post subject: Re: Rear headset jacks on torque tube covers

Rob; 



Here's a couple of pic's of what I am doing about the rear headphone/mic phone jacks.



Conrad

IMG_0531.jpg

Description:

Filesize:

26.53 KB

Viewed:

9652 Time(s)

IMG_0526.jpg

Description:

Filesize:

27.08 KB

Viewed:

9652 Time(s)

_________________
Conrad Booze
P. O. Box 7028
Warner Robins, GA. 31095
(478)-335-4264
conradbooze@cox.net

pitts_pilot(at)bellsouth.
Guest

Posted: Wed Mar 17, 2010 1:47 pm Post subject: Rear headset jacks on torque tube covers

Nice installation!  I was going to mount mine in the channel above the 

panel where you did.  I couldn't figure a good place to hang the 

headsets where the cords were out of the way of passengers getting 

in/out.  So I mounted mine in the console cover between the seats.

Linn



conradb wrote:

 	  Quote: 	
		   



 Rob; 



 Here's a couple of pic's of what I am doing about the rear headphone/mic phone jacks.



 Conrad



 --------

 Conrad Booze

 Sr. Engineer 

 P. O. Box 7028

 Warner Robins, GA. 31095

 (478)-335-4264

 conradbooze(at)cox.net





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=290666#290666





 Attachments: 



 http://forums.matronics.com//files/img_0531_653.jpg

 http://forums.matronics.com//files/img_0526_125.jpg

rv10rob(at)gmail.com
Guest

Posted: Tue Mar 23, 2010 11:59 am Post subject: Rear headset jacks on torque tube covers

Thanks for the replies.  I heard a few potential problems with the torque tube cover location (especially kicking the connectors) and a bunch of other suggestions.  My main concern with the armrest location is the blocking of the door access by the headset cords.  Does anyone regret putting their jacks on the armrest for that or any other reason?

   

 -Rob

 On Mon, Mar 15, 2010 at 10:42 PM, Rob Kochman <rv10rob(at)gmail.com (rv10rob(at)gmail.com)> wrote:

  	  Quote: 	
		   Has anyone mounted their rear headset jacks on the flap torque tube covers, right next to the tunnel?  Seems like a good location to me, where the wires don't block the doors and the connectors are out of the way.  Anyone have any comments/suggestions?

   

 Thanks..

  

 -Rob

-- 

Rob Kochman

RV-10 "Finishing" Kit

Woodinville, WA (near Seattle)

http://kochman.net/N819K



	
 

-- 

Rob Kochman

RV-10 "Finishing" Kit

Woodinville, WA (near Seattle)

http://kochman.net/N819K

  [quote][b]

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum