Matronics Email Lists :: View topic - batch of classic fuel filler pipes being made

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

batch of classic fuel filler pipes being made
Goto page 1, 2, 3 Next

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

graeme bird

Joined: 15 Jul 2010
Posts: 434

Posted: Sun Mar 04, 2012 5:03 am Post subject: batch of classic fuel filler pipes being made

I am thinking of getting a batch of aluminum fuel filler pipes made for the classic to replace the rubber trunk. Frank Mycroft sent me a drawing and has had the mod approved ( it may be with Ian as well).



a) does anyone else want one making, they would be cheaper in a batch

b) I can enquire locally but pointers as to where they could be made in the UK would be helpful (50mm x 1.5 pipe)



Regards Graeme

_________________
Graeme Bird
kit4 (Wagstaff) TBD
Kit3 G-CLXU (Gregory) mono 914 xs Woodcomp
Kit2 G-PATS - (kesterton) Mono Classic 912 warpdrive
Kit 1 G-UMPY - Mono Classic/XS 912S, Woodcomp G(@)gdbmk.co.uk

g-iani(at)ntlworld.com
Guest

Posted: Sun Mar 04, 2012 8:32 am Post subject: batch of classic fuel filler pipes being made

Yes I have a copy of the Mod 13070 and it is available from me and on the

new web site.  In LAA terms it will be a repeat Mod (£22.50) at present but

I can probably get it made a standard mod (then FOC) if there is enough

interest.

Ian Rickard G-IANI XS Trigear, 300hours

Europa Club Mods Specialist

e-mail g-iani(at)ntlworld.com

pete(at)lawless.info
Guest

Posted: Sun Mar 04, 2012 8:55 am Post subject: batch of classic fuel filler pipes being made

Hi Graeme



I will have one, it will probably save a bit of weight and my hose must be

getting towards the end of its life.



How many are you thinking of?  There is a chap on our strip with a metal

working company who may be interested in a batch of work.



If you have a drawing and dimensions I can ask him.



Regards



Pete

G-RMAC

Classic #109



--

roddyeuropa(at)aol.com
Guest

Posted: Mon Mar 05, 2012 1:16 am Post subject: batch of classic fuel filler pipes being made

Hi Graeme.

   I'm in for one if you are getting a batch made up.

   Roddy Kesterton

   G-IKRK

 

 

 

   --

kevinmarie(at)blueyonder.
Guest

Posted: Mon Mar 05, 2012 12:15 pm Post subject: batch of classic fuel filler pipes being made

I am interested



Kevin Challis

G ODJG

On 4 Mar 2012, at 13:03, "graeme bird" <graeme(at)gdbmk.co.uk> wrote:



 	  Quote: 	
		   

 

 I am thinking of getting a batch of aluminum fuel filler pipes made for the classic to replace the rubber trunk. Frank Mycroft sent me a drawing and has had the mod approved ( it may be with Ian as well).

 

 a) does anyone else want one making, they would be cheaper in a batch

 b) I can enquire locally but pointers as to where they could be made in the UK would be helpful (50mm x 1.5 pipe)

 

 Regards Graeme

 

 --------

 Graeme Bird

 G-UMPY

 Mono Classic/XS FWFD 912ULS/Warp drive FP

 Just competed conversion to type 

 G(at)gdbmk.co.uk

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=367709#367709

neveyre(at)aol.co.uk
Guest

Posted: Mon Mar 05, 2012 2:47 pm Post subject: batch of classic fuel filler pipes being made

I started conversations with 3 potential manufactures a while back, confess I have let it slip, will look back into it this week and report back.

   Cheers,

   Nev.

 

 

 

   --

neveyre(at)aol.co.uk
Guest

Posted: Wed Mar 14, 2012 11:24 am Post subject: batch of classic fuel filler pipes being made

Right, update;

   I gave up on the three manufacturers I asked to bid on before, no wonder all the work is going to China !

   Found someone [ a mate] to do the job, I need to know is how many are interested in this first batch.

   I intend to keep a bunch in stock later, as ALL Classic Europa's are going to need one sooner or later, I have inspected 3 recently for Permit Renewal, all getting close to being too far gone.

   Europa are not going to get any more rubber hoses made.

   The pipes will be from 6023 [ heat treated to T3 condition after bending in the T 0 state] with rolled beads on each end. Tags on both ends to ground [ earth] to filler cap and ground circuit.

   Will be a ''new'' Mod with the LAA as we can't use Franks Mod if there is the SLIGHTEST deviation.Frank used 6063 T6 [ YES  T6 !] How did he bend that ? So different material spec needs a new Mod ! ?

   Will be a complete Kit with all connecting hoses, clips, wire etc.....

   I will have a firm price in a week or so, best guess at the moment for the pipe only is about Â£115 / Â£120, but that depends on the number ? Looking at the cost of the other items at the moment.

   Best to ship [ especially to overseas] in multiples, as they will be big [ odd shape] can't be folded up like the rubber ones were ! ? [ mind, I expect Maureen would have tried !]

   So, who wants one in about 3 to 4 weeks ?

    I have had a pipe made from gash steel to trial fit, [ got 3 Europa's to check with, all slightly different !] if / when I get the go ahead from enough of you I will be ready to do sets for real in the alloy.

   Looks like a win / win situation going to alloy, wont get the stink through the poor quality rubber, and it will be lighter. Also got a ''cunning plan'' to aid faster filling, will report back on that later.

   So Guys, show me your money !

   Nev 

 

 

 

   --

dpark748(at)hotmail.co.uk
Guest

Posted: Wed Mar 14, 2012 12:08 pm Post subject: batch of classic fuel filler pipes being made

Hi nev, put me down for one.

Regards dave park. G-LDVO



Sent from my iPhone



On 14 Mar 2012, at 19:35, "Neville Eyre" <neveyre(at)aol.co.uk (neveyre(at)aol.co.uk)> wrote:



[quote] Right, update;

   I gave up on the three manufacturers I asked to bid on before, no wonder all the work is going to China !

   Found someone [ a mate] to do the job, I need to know is how many are interested in this first batch.

   I intend to keep a bunch in stock later, as ALL Classic Europa's are going to need one sooner or later, I have inspected 3 recently for Permit Renewal, all getting close to being too far gone.

   Europa are not going to get any more rubber hoses made.

   The pipes will be from 6023 [ heat treated to T3 condition after bending in the T 0 state] with rolled beads on each end. Tags on both ends to ground [ earth] to filler cap and ground circuit.

   Will be a ''new'' Mod with the LAA as we can't use Franks Mod if there is the SLIGHTEST deviation.Frank used 6063 T6 [ YES  T6 !] How did he bend that ? So different material spec needs a new Mod ! ?

   Will be a complete Kit with all connecting hoses, clips, wire etc.....

   I will have a firm price in a week or so, best guess at the moment for the pipe only is about Â£115 / Â£120, but that depends on the number ? Looking at the cost of the other items at the moment.

   Best to ship [ especially to overseas] in multiples, as they will be big [ odd shape] can't be folded up like the rubber ones were ! ? [ mind, I expect Maureen would have tried !]

   So, who wants one in about 3 to 4 weeks ?

    I have had a pipe made from gash steel to trial fit, [ got 3 Europa's to check with, all slightly different !] if / when I get the go ahead from enough of you I will be ready to do sets for real in the alloy.

   Looks like a win / win situation going to alloy, wont get the stink through the poor quality rubber, and it will be lighter. Also got a ''cunning plan'' to aid faster filling, will report back on that later.

   So Guys, show me your money !

   Nev 

 

 

 

   --

kevinmarie(at)blueyonder.
Guest

Posted: Wed Mar 14, 2012 12:35 pm Post subject: batch of classic fuel filler pipes being made

Put me down for 1 kit

G ODJG



Kevin Challis



On 14 Mar 2012, at 19:20, Neville Eyre <neveyre(at)aol.co.uk (neveyre(at)aol.co.uk)> wrote:



[quote] Right, update;

   I gave up on the three manufacturers I asked to bid on before, no wonder all the work is going to China !

   Found someone [ a mate] to do the job, I need to know is how many are interested in this first batch.

   I intend to keep a bunch in stock later, as ALL Classic Europa's are going to need one sooner or later, I have inspected 3 recently for Permit Renewal, all getting close to being too far gone.

   Europa are not going to get any more rubber hoses made.

   The pipes will be from 6023 [ heat treated to T3 condition after bending in the T 0 state] with rolled beads on each end. Tags on both ends to ground [ earth] to filler cap and ground circuit.

   Will be a ''new'' Mod with the LAA as we can't use Franks Mod if there is the SLIGHTEST deviation.Frank used 6063 T6 [ YES  T6 !] How did he bend that ? So different material spec needs a new Mod ! ?

   Will be a complete Kit with all connecting hoses, clips, wire etc.....

   I will have a firm price in a week or so, best guess at the moment for the pipe only is about Â£115 / Â£120, but that depends on the number ? Looking at the cost of the other items at the moment.

   Best to ship [ especially to overseas] in multiples, as they will be big [ odd shape] can't be folded up like the rubber ones were ! ? [ mind, I expect Maureen would have tried !]

   So, who wants one in about 3 to 4 weeks ?

    I have had a pipe made from gash steel to trial fit, [ got 3 Europa's to check with, all slightly different !] if / when I get the go ahead from enough of you I will be ready to do sets for real in the alloy.

   Looks like a win / win situation going to alloy, wont get the stink through the poor quality rubber, and it will be lighter. Also got a ''cunning plan'' to aid faster filling, will report back on that later.

   So Guys, show me your money !

   Nev 

 

 

 

   --

graeme bird

Joined: 15 Jul 2010
Posts: 434

Posted: Wed Mar 14, 2012 1:02 pm Post subject: Re: batch of classic fuel filler pipes being made

Obvioulsy, put me down for one. 

Also Roger Mills and Ian Mansfield have expressed an interest



I did ask Europa if they wanted to handle them but no response as yet.



Regards Graeme

07702361318

Bob.Fairall(at)fairalls.c
Guest

Posted: Wed Mar 14, 2012 1:08 pm Post subject: batch of classic fuel filler pipes being made

Me too please Nev ...... Bob Fairall, kit 494. 



Sent from my iPhone



On 14 Mar 2012, at 19:32, "Neville Eyre" <neveyre(at)aol.co.uk (neveyre(at)aol.co.uk)> wrote:



[quote] Right, update;

   I gave up on the three manufacturers I asked to bid on before, no wonder all the work is going to China !

   Found someone [ a mate] to do the job, I need to know is how many are interested in this first batch.

   I intend to keep a bunch in stock later, as ALL Classic Europa's are going to need one sooner or later, I have inspected 3 recently for Permit Renewal, all getting close to being too far gone.

   Europa are not going to get any more rubber hoses made.

   The pipes will be from 6023 [ heat treated to T3 condition after bending in the T 0 state] with rolled beads on each end. Tags on both ends to ground [ earth] to filler cap and ground circuit.

   Will be a ''new'' Mod with the LAA as we can't use Franks Mod if there is the SLIGHTEST deviation.Frank used 6063 T6 [ YES  T6 !] How did he bend that ? So different material spec needs a new Mod ! ?

   Will be a complete Kit with all connecting hoses, clips, wire etc.....

   I will have a firm price in a week or so, best guess at the moment for the pipe only is about Â£115 / Â£120, but that depends on the number ? Looking at the cost of the other items at the moment.

   Best to ship [ especially to overseas] in multiples, as they will be big [ odd shape] can't be folded up like the rubber ones were ! ? [ mind, I expect Maureen would have tried !]

   So, who wants one in about 3 to 4 weeks ?

    I have had a pipe made from gash steel to trial fit, [ got 3 Europa's to check with, all slightly different !] if / when I get the go ahead from enough of you I will be ready to do sets for real in the alloy.

   Looks like a win / win situation going to alloy, wont get the stink through the poor quality rubber, and it will be lighter. Also got a ''cunning plan'' to aid faster filling, will report back on that later.

   So Guys, show me your money !

   Nev 

 

 

 

   --

stranfaer(at)btinternet.c
Guest

Posted: Wed Mar 14, 2012 2:30 pm Post subject: batch of classic fuel filler pipes being made

Nev

 

Can you give dimensions for this please?

 

rgds

DJ



 

Sent to you from David Joyce

www.eastmidsspas.com

www.southyorksspas.com

      

  From: Bob Fairall <Bob.Fairall(at)fairalls.co.uk>

 To: "europa-list(at)matronics.com" <europa-list(at)matronics.com> 

 Sent: Wednesday, 14 March 2012, 21:08

 Subject: Re: batch of classic fuel filler pipes being made

  

 

Me too please Nev ...... Bob Fairall, kit 494. 



Sent from my iPhone



On 14 Mar 2012, at 19:32, "Neville Eyre" <neveyre(at)aol.co.uk (neveyre(at)aol.co.uk)> wrote:



[quote] Right, update;

   I gave up on the three manufacturers I asked to bid on before, no wonder all the work is going to China !

   Found someone [ a mate] to do the job, I need to know is how many are interested in this first batch.

   I intend to keep a bunch in stock later, as ALL Classic Europa's are going to need one sooner or later, I have inspected 3 recently for Permit Renewal, all getting close to being too far gone.

   Europa are not going to get any more rubber hoses made.

   The pipes will be from 6023 [ heat treated to T3 condition after bending in the T 0 state] with rolled beads on each end. Tags on both ends to ground [ earth] to filler cap and ground circuit.

   Will be a ''new'' Mod with the LAA as we can't use Franks Mod if there is the SLIGHTEST deviation.Frank used 6063 T6 [ YES  T6 !] How did he bend that ? So different material spec needs a new Mod ! ?

   Will be a complete Kit with all connecting hoses, clips, wire etc.....

   I will have a firm price in a week or so, best guess at the moment for the pipe only is about Ã‚Â£115 / Ã‚Â£120, but that depends on the number ? Looking at the cost of the other items at the moment.

   Best to ship [ especially to overseas] in multiples, as they will be big [ odd shape] can't be folded up like the rubber ones were ! ? [ mind, I expect Maureen would have tried !]

   So, who wants one in about 3 to 4 weeks ?

    I have had a pipe made from gash steel to trial fit, [ got 3 Europa's to check with, all slightly different !] if / when I get the go ahead from enough of you I will be ready to do sets for real in the alloy.

   Looks like a win / win situation going to alloy, wont get the stink through the poor quality rubber, and it will be lighter. Also got a ''cunning plan'' to aid faster filling, will report back on that later.

   So Guys, show me your money !

   Nev 

 

 

 

   --

europapa

Joined: 30 Aug 2010
Posts: 63

Posted: Wed Mar 14, 2012 2:50 pm Post subject: Re: batch of classic fuel filler pipes being made

Me too, please!

Hope it will reduce the gas smell.



Juergen Kit #161

grahamsingleton(at)btinte
Guest

Posted: Wed Mar 14, 2012 4:33 pm Post subject: batch of classic fuel filler pipes being made

Dave

don't you have the XS cobra, you need Tim Ward's pipe

G

        From: DAVID JOYCE <stranfaer(at)btinternet.com>

 To: "europa-list(at)matronics.com" <europa-list(at)matronics.com> 

 Sent: Wednesday, 14 March 2012, 22:28

 Subject: Re: batch of classic fuel filler pipes being made

Nev

Can you give dimensions for this please?

rgds

DJ

Sent to you from David Joyce

www.eastmidsspas.com

www.southyorksspas.com

        From: Bob Fairall <Bob.Fairall(at)fairalls.co.uk>

 To: "europa-list(at)matronics.com" <europa-list(at)matronics.com> 

 Sent: Wednesday, 14 March 2012, 21:08

 Subject: Re: Europa-List: batch of classic fuel filler pipes being made

Me too please Nev ...... Bob Fairall, kit 494. 

Sent from my iPhone

On 14 Mar 2012, at 19:32, "Neville Eyre" <neveyre(at)aol.co.uk (neveyre(at)aol.co.uk)> wrote:

[quote] Right, update;

   I gave up on the three manufacturers I asked to bid on before, no wonder all the work is going to China !

   Found someone [ a mate] to do the job, I need to know is how many are interested in this first batch.

   I intend to keep a bunch in stock later, as ALL Classic Europa's are going to need one sooner or later, I have inspected 3 recently for Permit Renewal, all getting close to being too far gone.

   Europa are not going to get any more rubber hoses made.

   The pipes will be from 6023 [ heat treated to T3 condition after bending in the T 0 state] with rolled beads on each end. Tags on both ends to ground [ earth] to filler cap and ground circuit.

   Will be a ''new'' Mod with the LAA as we can't use Franks Mod if there is the SLIGHTEST deviation.Frank used 6063 T6 [ YES  T6 !] How did he bend that ? So different material spec needs a new Mod ! ?

   Will be a complete Kit with all connecting hoses, clips, wire etc....

   I will have a firm price in a week or so, best guess at the moment for the pipe only is about Ã‚Â£115 / Ã‚Â£120, but that depends on the number ? Looking at the cost of the other items at the moment.

   Best to ship [ especially to overseas] in multiples, as they will be big [ odd shape] can't be folded up like the rubber ones were ! ? [ mind, I expect Maureen would have tried !]

   So, who wants one in about 3 to 4 weeks ?

    I have had a pipe made from gash steel to trial fit, [ got 3 Europa's to check with, all slightly different !] if / when I get the go ahead from enough of you I will be ready to do sets for real in the alloy.

   Looks like a win / win situation going to alloy, wont get the stink through the poor quality rubber, and it will be lighter. Also got a ''cunning plan'' to aid faster filling, will report back on that later.

   So Guys, show me your money !

   Nev 

   --

peter.rees01(at)tiscali.c
Guest

Posted: Thu Mar 15, 2012 1:02 am Post subject: batch of classic fuel filler pipes being made

We would like one please Nev



Peter



G-MFHI

dpark748(at)hotmail.co.uk
Guest

Posted: Thu Mar 15, 2012 1:08 am Post subject: batch of classic fuel filler pipes being made

Nev, cancel last request mine is an xs?

Regards. Dave g-ldvo



Sent from my iPhone



On 14 Mar 2012, at 20:17, "david park" <dpark748(at)hotmail.co.uk (dpark748(at)hotmail.co.uk)> wrote:



[quote]Hi nev, put me down for one.

Regards dave park. G-LDVO



Sent from my iPhone



On 14 Mar 2012, at 19:35, "Neville Eyre" <neveyre(at)aol.co.uk (neveyre(at)aol.co.uk)> wrote:



[quote] Right, update;

   I gave up on the three manufacturers I asked to bid on before, no wonder all the work is going to China !

   Found someone [ a mate] to do the job, I need to know is how many are interested in this first batch.

   I intend to keep a bunch in stock later, as ALL Classic Europa's are going to need one sooner or later, I have inspected 3 recently for Permit Renewal, all getting close to being too far gone.

   Europa are not going to get any more rubber hoses made.

   The pipes will be from 6023 [ heat treated to T3 condition after bending in the T 0 state] with rolled beads on each end. Tags on both ends to ground [ earth] to filler cap and ground circuit.

   Will be a ''new'' Mod with the LAA as we can't use Franks Mod if there is the SLIGHTEST deviation.Frank used 6063 T6 [ YES  T6 !] How did he bend that ? So different material spec needs a new Mod ! ?

   Will be a complete Kit with all connecting hoses, clips, wire etc.....

   I will have a firm price in a week or so, best guess at the moment for the pipe only is about Â£115 / Â£120, but that depends on the number ? Looking at the cost of the other items at the moment.

   Best to ship [ especially to overseas] in multiples, as they will be big [ odd shape] can't be folded up like the rubber ones were ! ? [ mind, I expect Maureen would have tried !]

   So, who wants one in about 3 to 4 weeks ?

    I have had a pipe made from gash steel to trial fit, [ got 3 Europa's to check with, all slightly different !] if / when I get the go ahead from enough of you I will be ready to do sets for real in the alloy.

   Looks like a win / win situation going to alloy, wont get the stink through the poor quality rubber, and it will be lighter. Also got a ''cunning plan'' to aid faster filling, will report back on that later.

   So Guys, show me your money !

   Nev 

 

 

 

   --

nicolaandjohn(at)talktalk
Guest

Posted: Sun Mar 18, 2012 11:11 pm Post subject: batch of classic fuel filler pipes being made

Neville,

  

 Can you please put me down for one.

  

 Many thanks

  

 John Price

  

 G-SHSH

 Kit 113.

  

  

  

  

    

  From: Neville Eyre (neveyre(at)aol.co.uk) 

 Sent: Wednesday, March 14, 2012 7:20 PM

 To: europa-list(at)matronics.com (europa-list(at)matronics.com) 

 Subject: Re: batch of classic fuel filler pipes being  made

  



  Right, update;

 I gave up on the three manufacturers I asked to bid on before, no wonder  all the work is going to China !

 Found someone [ a mate] to do the job, I need to know is how many are  interested in this first batch.

 I intend to keep a bunch in stock later, as ALL Classic Europa's are going  to need one sooner or later, I have inspected 3 recently for Permit Renewal, all  getting close to being too far gone.

 Europa are not going to get any more rubber hoses made.

 The pipes will be from 6023 [ heat treated to T3 condition after bending in  the T 0 state] with rolled beads on each end. Tags on both ends to ground [  earth] to filler cap and ground circuit.

 Will be a ''new'' Mod with the LAA as we can't use Franks Mod if there is  the SLIGHTEST deviation.Frank used 6063 T6 [ YES  T6 !] How did he bend  that ? So different material spec needs a new Mod ! ?

 Will be a complete Kit with all connecting hoses, clips, wire  etc.....

 I will have a firm price in a week or so, best guess at the moment for the  pipe only is about Â£115 / Â£120, but that depends on the number ? Looking at the  cost of the other items at the moment.

 Best to ship [ especially to overseas] in multiples, as they will be big [  odd shape] can't be folded up like the rubber ones were ! ? [ mind, I expect  Maureen would have tried !]

 So, who wants one in about 3 to 4 weeks ?

 I have had a pipe made from gash steel to trial fit, [ got 3 Europa's to  check with, all slightly different !] if / when I get the go ahead from enough  of you I will be ready to do sets for real in the alloy.

 Looks like a win / win situation going to alloy, wont get the stink through  the poor quality rubber, and it will be lighter. Also got a ''cunning plan'' to  aid faster filling, will report back on that later.

 So Guys, show me your money !

 Nev 



 -----Original  Message-----

From: Neville Eyre <neveyre(at)aol.co.uk>

To: europa-list  <europa-list(at)matronics.com>

Sent: Mon, 5 Mar 2012 22:47

Subject: Re:  batch of classic fuel filler pipes being made



  I started conversations with 3 potential manufactures a while back, confess  I have let it slip, will look back into it this week and report back.

 Cheers,

 Nev.



 -----Original  Message-----

From: graeme bird <graeme(at)gdbmk.co.uk (graeme(at)gdbmk.co.uk)>

To: europa-list  <europa-list(at)matronics.com (europa-list(at)matronics.com)>

Sent:  Sun, 4 Mar 2012 13:33

Subject: batch of classic fuel filler  pipes being made



  	  Quote: 	
		  --> Europa-List message posted by: "graeme bird" <graeme(at)gdbmk.co.uk (graeme(at)gdbmk.co.uk)>



I am thinking of getting a batch of aluminum fuel filler pipes made for the 

classic to replace the rubber trunk. Frank Mycroft sent me a drawing and has had 

the mod approved ( it may be with Ian as well).



a) does anyone else want one making, they would be cheaper in a batch

b) I can enquire locally but pointers as to where they could be made in the UK 

would be helpful (50mm x 1.5 pipe)



Regards Graeme



--------

Graeme Bird

G-UMPY

Mono Classic/XS FWFD 912ULS/Warp drive FP

Just competed conversion to type 

G(at)gdbmk.co.uk





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=367709#367709



arget=_blank>http://www.matronics.com/Navigator?Europa-List

p://forums.matronics.com

blank>http://www.matronics.com/contribution



	




 	  Quote: 	
		  



arget=_blank>http://www.matronics.com/Navigator?Europa-List

p://forums.matronics.com

blank>http://www.matronics.com/contribution



	




[quote]



href="http://www.matronics.com/Navigator?Europa-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/c

[b]

Richard Lamprey

Joined: 15 Jul 2011
Posts: 95
Location: Kenya

Posted: Tue Mar 20, 2012 1:21 am Post subject: Re: batch of classic fuel filler pipes being made

Hi, I would like one too.  



I assume this is for the vertical pipe to the filler just ahead of the vents on top, rather than the XS-to-Classic retrofit arrangement, where the filler is on the side of the aircraft.



Can pay from UK account, and delivery to UK address.



Thanks!

Best

Richard

Kenya

Classic 5Y-LRY

Justin(at)systemwise.co.u
Guest

Posted: Tue Mar 20, 2012 3:16 am Post subject: batch of classic fuel filler pipes being made

Hi Neville.

 

Yes please, book one in for me. The kit sounds great just let me know how much and when.

I like the idea of getting rid of the smell of seeping fuel.

Is there a recommendation/current wisdom out there on the type of hose to use for the rest of the fuel system as mine is coming up for first replacement?

 

Let me know

Justin

 

Justin Kennedy

G-ZTED Europa Classic Monowheel

Rotax 912S Airmaster Prop

280 hours

 [quote][b]

MalcolmH

Joined: 10 May 2010
Posts: 15

Posted: Thu Mar 22, 2012 1:24 am Post subject: Re: batch of classic fuel filler pipes being made

Hi Neville,



Thanks for organising this and please count me in for a kit as well



Regards



Malcolm

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours Goto page 1, 2, 3 Next
Page 1 of 3

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum