Matronics Email Lists :: View topic - |Arblast Propellar Spinner

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

|Arblast Propellar Spinner

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

Alan Carter

Joined: 02 Jul 2012
Posts: 378
Location: Kent, England.

Posted: Fri May 30, 2014 1:04 pm Post subject: |Arblast Propellar Spinner

Hi All.

Just had my permit done, the only maintenance I can see is to grease the lead screw.

However my spinner rotates un-evenly, i can only put the spinner on the same way round as the screws only line up that way.

I have checked the rear back plate which is only about a mm out of true,

I note there is another circular plate in front of the prop,

but this plate does not attach to the spinner, at this same position on the spinner there is a row of screws ie imitation not used,

They are just forward of the plate mentioned above, i was wondering if this is normal or should the screws be attached to this forward plate.

The spinner plates seem to be made of thin aluminium backed with fibre glass to give it strength, the spinner is also thin fibre glass about 14 or 15" in length.

The screws i have mentioned are forward of the plate so no means of fixing them to the plate, its the rear screws only that hold the spinner on.



Regards.

Alan

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum