Matronics Email Lists :: View topic - PCU5000X Governor vs Hartzell

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

PCU5000X Governor vs Hartzell

Matronics Email Lists Forum Index -> RV14-List

View previous topic :: View next topic

Author Message

Tim Olson

Joined: 25 Jan 2007
Posts: 2872

Posted: Mon Sep 21, 2015 12:28 pm Post subject: PCU5000X Governor vs Hartzell

Hi all,  sorry to cross-post to 2 forums. Generally I don't do

that, but the RV-14 forum doesn't get any posts so at least

this one will go there.



As with all the other kits for the RV-14, Van's is taking

what in builders lifetimes is "forever" getting their FWF kit

out.  I need to get some things fitted up, now that I have

my engine hung, such as the prop control cable.

So I want to buy my prop governor, and start working on that.



For the IO-390, it uses a .895:1 ratio governor, and on one

of the Van's planes they used the Hartzell S-1-79.   The lever

comes clocked to 180 degrees.   From a bit of googling, it

sounds like *perhaps* the Hartzell's are an older design, but

I hear conflicting things like the S-1 series were developed

for Van's, and have more oil flow.



Then, there is the PCU5000X P-520-029/A-947, that is the proper

gear ratio and model for the IO-390 that I've installed.

They claim to be newer designed, with high oil flows too.



Seeing as though Van's is so ultra-slow in getting the FWF kit

together, they don't have stock of the governors for the IO-390

at all.  I'd like to get one ordered, and can get a PCU5000X

for about the same price as the Hartzell's that Van's sells.

I know some people love the PCU5000X.  I know many who

have a Hartzell.  Does anyone have any info on either that

would push me in one direction or the other?



I love pictures, if you have any, too.



Tim

RV-10 N104CD (2006 to present)

RV-14 (FWF/Finishing)

- The Matronics RV14-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV14-List

carl.froehlich(at)verizon
Guest

Posted: Mon Sep 21, 2015 12:37 pm Post subject: PCU5000X Governor vs Hartzell

Two planes (RV-8A and RV-10) with the PCU500X and they have been flawless.  I got both via a group buy on Van's Air Force so price was less than the Hartzell.



You might want to call a couple of prop/governor overhaul shops and get their opinion as I have heard second hand they prefer the PCU5000X. 



Carl 



 	  Quote: 	
		   On Sep 21, 2015, at 4:28 PM, Tim Olson <Tim(at)MyRv10.com> wrote:

 

 

 

 Hi all,  sorry to cross-post to 2 forums. Generally I don't do

 that, but the RV-14 forum doesn't get any posts so at least

 this one will go there.

 

 As with all the other kits for the RV-14, Van's is taking

 what in builders lifetimes is "forever" getting their FWF kit

 out.  I need to get some things fitted up, now that I have

 my engine hung, such as the prop control cable.

 So I want to buy my prop governor, and start working on that.

 

 For the IO-390, it uses a .895:1 ratio governor, and on one

 of the Van's planes they used the Hartzell S-1-79.   The lever

 comes clocked to 180 degrees.   From a bit of googling, it

 sounds like *perhaps* the Hartzell's are an older design, but

 I hear conflicting things like the S-1 series were developed

 for Van's, and have more oil flow.

 

 Then, there is the PCU5000X P-520-029/A-947, that is the proper

 gear ratio and model for the IO-390 that I've installed.

 They claim to be newer designed, with high oil flows too.

 

 Seeing as though Van's is so ultra-slow in getting the FWF kit

 together, they don't have stock of the governors for the IO-390

 at all.  I'd like to get one ordered, and can get a PCU5000X

 for about the same price as the Hartzell's that Van's sells.

 I know some people love the PCU5000X.  I know many who

 have a Hartzell.  Does anyone have any info on either that

 would push me in one direction or the other?

 

 I love pictures, if you have any, too.

 

 Tim

 RV-10 N104CD (2006 to present)

 RV-14 (FWF/Finishing)

- The Matronics RV14-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV14-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV14-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum