Matronics Email Lists :: View topic - rotax 912 fuel banjo angle

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

rotax 912 fuel banjo angle

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

rowlandcarson(at)gmail.co
Guest

Posted: Sat Oct 01, 2016 8:14 am Post subject: rotax 912 fuel banjo angle

I posted this query last month but have had no response so I’m trying again.



In Appendix A (final inspection checklist) of the Rotax 912S installation manual for the Europa XS, one of the items is puzzling me. It says:



"Check that fuel inlet banjos are correctly orientated."



However, I can find nowhere in the document indicating what the correct angle might be. I’d like to be sure mine are correctly orientated before I start connecting fuel lines.



Here is a link to pictures of the carbs on my engine as-supplied:



http://www.rowlandcarson.org.uk/aviation/europa_435/carb_inlets.pdf



and I wonder if anyone can tell me if they are at the correct angle.



in friendship



Rowland



| Rowland Carson          ... that's Rowland with a 'w' ...

| <rowlandcarson(at)gmail.com>            http://www.rowlandcarson.org.uk

| Skype, Twitter: rowland_carson      Facebook: Rowland Carson

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Burrilla

Joined: 25 Apr 2015
Posts: 189

Posted: Sat Oct 01, 2016 8:48 am Post subject: rotax 912 fuel banjo angle

I'm not aware of any particular angel.



My only suggestion is that it might refer to making sure the banjo is orientated so that the fuel lines do not impede the carb controls and are clear of any heat sources.



The only other thought is that with the fuel lines arriving from below then any vapour locks forming are more likely to be expunged through the carb than sitting in the pipes at a high spot above the carb.



All IMHO



Alan

G-OBJT

 	  Quote: 	
		   On 1 Oct 2016, at 17:13, Rowland Carson <rowlandcarson(at)gmail.com> wrote:

 

 

 

 I posted this query last month but have had no response so I’m trying again.

 

 In Appendix A (final inspection checklist) of the Rotax 912S installation manual for the Europa XS, one of the items is puzzling me. It says:

 

 "Check that fuel inlet banjos are correctly orientated."

 

 However, I can find nowhere in the document indicating what the correct angle might be. I’d like to be sure mine are correctly orientated before I start connecting fuel lines.

 

 Here is a link to pictures of the carbs on my engine as-supplied:

 

 http://www.rowlandcarson.org.uk/aviation/europa_435/carb_inlets.pdf

 

 and I wonder if anyone can tell me if they are at the correct angle.

 

 in friendship

 

 Rowland

 

 | Rowland Carson          ... that's Rowland with a 'w' ...

 | <rowlandcarson(at)gmail.com>            http://www.rowlandcarson.org.uk

 | Skype, Twitter: rowland_carson      Facebook: Rowland Carson

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

JonathanMilbank

Joined: 14 Apr 2012
Posts: 397
Location: Aberdeen area

Posted: Mon Oct 03, 2016 8:19 am Post subject: Re: rotax 912 fuel banjo angle

I agree with Alan. Those banjos can be angled any way that suits your installation.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum