Matronics Email Lists :: View topic - Throttle Cable for Rotax

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Throttle Cable for Rotax

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

Tommy Walker

Joined: 12 Jan 2006
Posts: 442
Location: Anniston, AL 36207

Posted: Tue Sep 05, 2006 5:15 am Post subject: Throttle Cable for Rotax

Rotaxers,



I'm scratching my head trying to figure out how to substitute a conventional throttle with a throttle cable for the T-Handle throttle supplied with my kit.  I figured it would be easier to operate and keep the RPM at a cruise setting compared to the T-Handle.



My problem is how to connect it to the Bellcrank.  There has to be a way, but so far I've not figured it out yet.  The throttle cable is an ACS model with a friction lock.  The cable is about between 1/16- 1/8 diameter.  Surely there is a device somewhere out there that will work.



Any ideas?



Tommy Walker in Alabama

Do Not Archive

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
Tommy Walker
N25A - Anniston, AL

rstone4(at)hot.rr.com
Guest

Posted: Tue Sep 05, 2006 5:40 am Post subject: Throttle Cable for Rotax

Tommy,

     A picture or drawing of the part you want to connect and the place 

where you want to connect it would help us all help you to figure it out.  I 

personally would install a verner throttle cable.  This is the kind that you 

can push in or out for general usage or turn to get fine adjustments like 

when you are flying formation.



Bob Stone, Harker Heights, Tx

ZodiacXL



---

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

jon(at)joncroke.com
Guest

Posted: Tue Sep 05, 2006 6:18 am Post subject: Throttle Cable for Rotax

This is from our friend from Iceland, Johan, who has finished his very nice 

701...  without his permission I include:

(sorry for small size picture... I am restricted to dialup out in these 

woods that I live...! )  (not complaining, tho!)



 	  Quote: 	
		  

 I'm scratching my head trying to figure out how to substitute a 

 conventional throttle with a throttle cable for the T-Handle throttle 

 supplied with my kit.  I figured it would be easier to operate and keep 

 the RPM at a cruise setting compared to the T-Handle.



 My problem is how to connect it to the Bellcrank.  There has to be a way, 

 but so far I've not figured it out yet.  The throttle cable is an ACS 

 model with a friction lock.  The cable is about between 1/16- 1/8 

 diameter.  Surely there is a device somewhere out there that will work.



 Any ideas?

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Throttle_Johan.jpg

Description:

Filesize:

28.89 KB

Viewed:

459 Time(s)

bryanmmartin

Joined: 10 Jan 2006
Posts: 1018

Posted: Tue Sep 05, 2006 7:37 am Post subject: Throttle Cable for Rotax

I used a vernier throttle in my 601. It works very well. One thing about a vernier type throttle is that will make the second throttle useless because the vernier mechanism locks the throttle cable up in such a way that it can only be operated from the vernier. I couldn't see any way to make a second throttle function with a vernier on the other side so I eliminated the entire throttle system supplied with the kit and fabricated my own bracket to hook the vernier up to just the pilot's side of the panel. In a pinch, the right seat co-pilot can switch hands on the stick and reach across to operate the throttle. Since all take-offs and landings will normally be flown from the left seat, this arrangement presents no problem.

 



-------------- Original message ----------------------

From: "Robert L. Stone" <rstone4(at)hot.rr.com>

[quote] 

 I personally would install a verner throttle cable.  This is the kind that you 

 can push in or out for general usage or turn to get fine adjustments like 

 when you are flying formation.

 

 ---

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
--
Bryan Martin
N61BM, CH 601 XL, Stratus Subaru.
do not archive.

webmaster(at)upac.ca
Guest

Posted: Tue Sep 05, 2006 9:56 am Post subject: Throttle Cable for Rotax

Tommy, I converted mine to the ACS throttle as well. It was actually quite

easy. I made a part from aluminum stock on a lathe to adapt the wire to

the bell crank.



I'm not the originator of the idea however, Johann in Iceland is. Have a

look on his 701 website for pictures of the adaptor here:



http://www.gi.is/fis/zenithpanel.htm



Trevor Page

CH601HD

R912



 	  Quote: 	
		   



 Rotaxers,



 I'm scratching my head trying to figure out how to substitute a

 conventional throttle with a throttle cable for the T-Handle throttle

 supplied with my kit.  I figured it would be easier to operate and keep

 the RPM at a cruise setting compared to the T-Handle.



 My problem is how to connect it to the Bellcrank.  There has to be a way,

 but so far I've not figured it out yet.  The throttle cable is an ACS

 model with a friction lock.  The cable is about between 1/16- 1/8

 diameter.  Surely there is a device somewhere out there that will work.



 Any ideas?



 Tommy Walker in Alabama

 Do Not Archive



 --------

 Tommy Walker





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=59586#59586

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

ggower_99(at)yahoo.com
Guest

Posted: Tue Sep 05, 2006 10:12 am Post subject: Throttle Cable for Rotax

Great idea from Johan,  

My comment,  I will just add a little drop of Locktite to the bolt tread...  Will not hurt and will prevent loose from vibration.



Saludos

Gary Gower

Flying from Chapala, Mexico.

Jon Croke <jon(at)joncroke.com> wrote: 	  Quote: 	
		   This is from our friend from Iceland, Johan, who has finished his very nice 

701...  without his permission I include:

(sorry for small size picture... I am restricted to dialup out in these 

woods that I live...! )  (not complaining, tho!)



 	  Quote: 	
		  

 I'm scratching my head trying to figure out how to substitute a 

 conventional throttle with a throttle cable for the T-Handle throttle 

 supplied with my kit.  I figured it would be easier to operate and keep 

 the RPM at a cruise setting compared to the T-Handle.



  My problem is how to connect it to the Bellcrank.  There has to be a way, 

 but so far I've not figured it out yet.  The throttle cable is an ACS 

 model with a friction lock.  The cable is about between 1/16- 1/8 

 diameter.  Surely there is a device somewhere out there that will work.



 Any ideas?



 	



	


  [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Johann G. Johannsson

Joined: 10 Jan 2006
Posts: 18
Location: Iceland

Posted: Wed Sep 06, 2006 11:42 am Post subject: Re: Throttle Cable for Rotax

Hello Tommy.



I used the Vernier throttle from ACS wit the solid wire end, A820 on both sides. I started with the throttle on the left side, and then decided to install it on both sides, because it was the perfect setup.

The old T from Zenith is still on the right side in the picture on my home page. 

Did not like that long stick because it was hard to control.

If you need the part to attatch the cable to the steel rod, I could send it to you. Just contact me off list with your address, and I will ship it to you.



Best regards,

Johann G.

Iceland.

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
Johann G.
Iceland.
Flying Zenith 701.

Tommy Walker

Joined: 12 Jan 2006
Posts: 442
Location: Anniston, AL 36207

Posted: Sun Sep 10, 2006 9:15 am Post subject: Re: Throttle Cable for Rotax

Johann,

I sent email, but I'm not sure you got it, so I will reply here.  I would sure like to have the part.  I can send you a check, just let me know.



My Address:



Tommy Walker 

28 Old Coach Road

Anniston, AL 36207



Ph. 256-835-6610

email: twalker(at) cableone.net



 	  Johann G. Johannsson wrote: 	
		  Hello Tommy.



I used the Vernier throttle from ACS wit the solid wire end, A820 on both sides. I started with the throttle on the left side, and then decided to install it on both sides, because it was the perfect setup.

The old T from Zenith is still on the right side in the picture on my home page. 

Did not like that long stick because it was hard to control.

If you need the part to attatch the cable to the steel rod, I could send it to you. Just contact me off list with your address, and I will ship it to you.



Best regards,

Johann G.

Iceland.

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
Tommy Walker
N25A - Anniston, AL

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum