Matronics Email Lists :: View topic - Source for Laser/WaterJet cutting

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Source for Laser/WaterJet cutting

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Mon Jan 08, 2007 2:02 pm Post subject: Source for Laser/WaterJet cutting

I'm looking for a source that can do laser or water jet cutting of some 

subpanels for my instrument panel. Since I'm using a 'non-standard' 

panel it's not one of those supported on epanelbuilder. I have the 

capability to produce and send AutoCad compatible files. anybody know of 

a source?



Deems Davis # 406

Finishing - ( A Misnomer ! )

http://deemsrv10.com/



 	  Quote:

mike(at)cleavelandtool.co
Guest

Posted: Mon Jan 08, 2007 2:23 pm Post subject: Source for Laser/WaterJet cutting

Witte Industries in South Dakota is a new RV10 Builder... Ask for Michael.  I understand they do 1 off parts.



You may have luck with Precision H2O in Spokane, WA also, but they are more geared toward production.

 

Mike

On 1/8/07, Deems Davis <deemsdavis(at)cox.net (deemsdavis(at)cox.net)> wrote:[quote] --> RV10-List message posted by: Deems Davis <deemsdavis(at)cox.net (deemsdavis(at)cox.net)>



I'm looking for a source that can do laser or water jet cutting of some

subpanels for my instrument panel. Since I'm using a 'non-standard' 

panel it's not one of those supported on epanelbuilder. I have the

capability to produce and send AutoCad compatible files. anybody know of

a source?



Deems Davis # 406

Finishing - ( A Misnomer ! )

 

Cleaveland Aircraft Tool

515-432-6794

www.cleavelandtool.com  [quote][b]

noel(at)blueskyaviation.n
Guest

Posted: Mon Jan 08, 2007 2:27 pm Post subject: Source for Laser/WaterJet cutting

Yes Deems, I have water-jet cutting available to me just had a panel cut

for an RV-7 we are building E  Also I did my labeling using Solid Works came

out Fantastic!!!  Best panel I have ever done!!!

Noel



--------------------------------------------------------------------

mail2web - Check your email from the web at

http://mail2web Ecom/  E

DSCF4815.JPG

Description:

Filesize:

121.68 KB

Viewed:

206 Time(s)

DSCF4812.JPG

Description:

Filesize:

127.05 KB

Viewed:

196 Time(s)

DSCF4814.JPG

Description:

Filesize:

142.8 KB

Viewed:

217 Time(s)

jwik(at)crary.com
Guest

Posted: Mon Jan 08, 2007 2:55 pm Post subject: Source for Laser/WaterJet cutting

I know of a small one person shop.  I know she laser's primarily 

acrylics but is accustomed to very small quantity requirements and likes 

the small niche markets.



I'll ask on her experience and willingness for aluminum (I'm sure her 

laser has the wattage needed) and AutoCad in the next day or two unless 

someone comes up with something better.  I've forgotten where you are,  

I'm in Fergus Falls MN.



I'm not even close to this stage so I'd need to know approximate size 

and gauge of the parts.

Deems Davis wrote:

 	  Quote: 	
		   



 I'm looking for a source that can do laser or water jet cutting of 

 some subpanels for my instrument panel. Since I'm using a 

 'non-standard' panel it's not one of those supported on epanelbuilder. 

 I have the capability to produce and send AutoCad compatible files. 

 anybody know of a source?



 Deems Davis # 406

 Finishing - ( A Misnomer ! )

 http://deemsrv10.com/



>

apilot2(at)gmail.com
Guest

Posted: Mon Jan 08, 2007 3:25 pm Post subject: Source for Laser/WaterJet cutting

Deems, Pacific Southwest Avionics at Stellar does it, although when I

wanted a couple holes enlarged to 3 ATI size they weren't interested,

too small a job. He is mostly into redoing entire panels on certified

planes. http://www.psavionics.com/



On 1/8/07, Deems Davis <deemsdavis(at)cox.net> wrote:

 	  Quote: 	
		   



 I'm looking for a source that can do laser or water jet cutting of some

 subpanels for my instrument panel. Since I'm using a 'non-standard'

 panel it's not one of those supported on epanelbuilder. I have the

 capability to produce and send AutoCad compatible files. anybody know of

 a source?



 Deems Davis # 406

 Finishing - ( A Misnomer ! )

 http://deemsrv10.com/



 >

jesse(at)itecusa.org
Guest

Posted: Mon Jan 08, 2007 4:21 pm Post subject: Source for Laser/WaterJet cutting

Double R Manufacturing in Ocala, FL does it.  They have done work for us.

They price is good, but they have to be convinced a little bit to do such a

small job.  You can get them at www.doublermfg.com.



Jesse Saint

I-TEC, Inc.

jesse(at)itecusa.org

www.itecusa.org

Cell: 352-427-0285

Fax: 815-377-3694



--

david555(at)cox.net
Guest

Posted: Mon Jan 08, 2007 5:06 pm Post subject: Source for Laser/WaterJet cutting

Deems, I have a water jet and a CNC router. Call me (at) 757 236 5110 and I'll 

discuss the pros and cons of the approaches to cutting the panel with each 

of these machines. I have cut test panels out of scrap High pressure 

laminate in order to tweak the panel layout prior to cutting the final 

panel. I created a frame designed with four subpanels so that I could remove 

one section without removing the others. Good Luck David O Boone 40138



---

mikedoble(at)wi.rr.com
Guest

Posted: Mon Jan 08, 2007 5:54 pm Post subject: Source for Laser/WaterJet cutting

Deems - I have a guy I work with here that has a fab shop with a water jet

machine.  He can convert AutoCAD to his system and cut away...



Send me a file offline with the thickness and I'll pass it on for a quote.



Mike

Waiting on my EMP kit.....Shipped today though!!!



Do not archive



--

ddddsp1(at)juno.com
Guest

Posted: Mon Jan 08, 2007 10:06 pm Post subject: Source for Laser/WaterJet cutting

Noel, 

Can Solid Works do labeling on TEXTURED painted panels?  Love to talk to you about it.  You have a number I can call you at? 

Dean  40449  



________________________________________________________________________

 FREE Reminder Service  - NEW from AmericanGreetings.com

 Click HERE and never forget a Birthday or Anniversary again!

    [quote][b]

noel(at)blueskyaviation.n
Guest

Posted: Tue Jan 09, 2007 7:29 am Post subject: Source for Laser/WaterJet cutting

Solid works just created the "art work" for the labiling.  using trexure I

think (the people on the list may know better) you will want silk

screeaning witch will need the same Art work as I  created for labeling.



Blue Sky Aviation, Inc.



406-538-6574



www.blueskyaviation.net



--------------------------------------------------------------------

mail2web - Check your email from the web at

http://mail2web.com/ .

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Tue Jan 09, 2007 3:31 pm Post subject: Source for Laser/WaterJet cutting

Thanks to all who provided leads and contact info re this topic I've got 

a few more days work to finish off the CAD files, but I think I've got 

enough leads to get something worked out.

THANKS Again



Deems Davis # 406

Finishing - ( A Misnomer ! )

http://deemsrv10.com/ -



waiting on engine mount fix to hang engine

Do Not Archive

 	  Quote:

armywrights(at)adelphia.n
Guest

Posted: Tue Jan 09, 2007 8:15 pm Post subject: Source for Laser/WaterJet cutting

Deems, what went wrong with your mount, or do you have a close tolerance a

la Tim O?



Rob Wright

#392

Engine mount on horizon



--

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum