Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Fuel Tank Attach Nutplates

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
moons1999(at)yahoo.com
Guest





PostPosted: Sun Feb 11, 2007 1:01 pm    Post subject: Fuel Tank Attach Nutplates Reply with quote

All,
I am working on the wing spars and on page 13-4 step 3 I need to machine countersink the nutplate attach rivet holes. That's all fine and dandy but there are two holes for the fuel tank nutplates that are too close to the spar step to get the countersink in there. How have you been able to get in there? I am sure I am missing something very obvious. Thanks in advance.

--Shawn
40366

Never Miss an Email
Stay connected with Yahoo! Mail on your mobile. [url=http://us.rd.yahoo.com/evt=43909/*http://mobile.yahoo.com/services?promote=mail]Get started![/url] [quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
n8vim(at)arrl.net
Guest





PostPosted: Sun Feb 11, 2007 1:08 pm    Post subject: Fuel Tank Attach Nutplates Reply with quote

I just used a deburring bit (100 degree) in an electric screwdriver...
Just keep going until the rivet is flush.

Takes longer than the microstop, and you need to be careful of the
depth, but it works!

-Jim 40384

Shawn Moon wrote:

Quote:
All,
I am working on the wing spars and on page 13-4 step 3 I need to
machine countersink the nutplate attach rivet holes. That's all fine
and dandy but there are two holes for the fuel tank nutplates that are
too close to the spar step to get the countersink in there. How have
you been able to get in there? I am sure I am missing something very
obvious. Thanks in advance.

--Shawn
40366

------------------------------------------------------------------------
Never Miss an Email
Stay connected with Yahoo! Mail on your mobile. Get started!
<http://us.rd.yahoo.com/evt=43909/*http://mobile.yahoo.com/services?promote=mail>
*
*



- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
moons1999(at)yahoo.com
Guest





PostPosted: Sun Feb 11, 2007 5:32 pm    Post subject: Fuel Tank Attach Nutplates Reply with quote

That is what I was thinking about. Thought there might be a better way to do it but I guess not. Thanks for the reply.

--Shawn
40366

---


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
jesse(at)saintaviation.co
Guest





PostPosted: Sun Feb 11, 2007 5:52 pm    Post subject: Fuel Tank Attach Nutplates Reply with quote

You could also just put the countersink bit in the deburring bit holder (depending on which one you have), which makes a better countersink than the deburring bit because it tends to wander and the countersink bit stays centered.

Do not archive.

Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Shawn Moon
Sent: Sunday, February 11, 2007 8:32 PM
To: rv10-list(at)matronics.com
Subject: Re: Fuel Tank Attach Nutplates


That is what I was thinking about. Thought there might be a better way to do it but I guess not. Thanks for the reply.

--Shawn
40366
---


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group