Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Door Handles

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

seipel(at)seznam.cz
Guest

Posted: Sat Feb 24, 2007 7:14 am Post subject: Door Handles

I know this was discussed before, but did anyone ever end up with some 

decent looking door handles that don't cost $350 each?  Ideally I'm 

looking for something that will fit with the existing mechanism.



PJ Seipel

RV-10 #40032

rv10builder(at)bellsouth.
Guest

Posted: Sat Feb 24, 2007 7:27 am Post subject: Door Handles

I got a very nice set of door handles from Dave Czachorowski.  His WEB 

site is www.rivethead-aero.com.  He can be reached at (302) 437-6087 or 

by email:

dczach86(at)hotmail.com



Regards,



Brian Sutherland

Nashville, TN

#40308

http://www.mykitlog.com/rv10builder





PJ Seipel wrote:

 	  Quote: 	
		   



 I know this was discussed before, but did anyone ever end up with some 

 decent looking door handles that don't cost $350 each?  Ideally I'm 

 looking for something that will fit with the existing mechanism.



 PJ Seipel

 RV-10 #40032





 .

John Ackerman

Joined: 19 Jun 2006
Posts: 130
Location: Prescott, AZ

Posted: Sat Feb 24, 2007 8:01 am Post subject: Door Handles

Brian, I don't see door handles listed. What an I missing? do not  

archive

John Ackerman

On Feb 24, 2007, at 8:26 AM, rv10builder wrote:



 	  Quote: 	
		   

 <rv10builder(at)bellsouth.net>



 I got a very nice set of door handles from Dave Czachorowski.  His  

 WEB site is www.rivethead-aero.com.  He can be reached at (302)  

 437-6087 or by email:

 dczach86(at)hotmail.com



 Regards,



 Brian Sutherland

 Nashville, TN

 #40308

 http://www.mykitlog.com/rv10builder





 PJ Seipel wrote:

> 

>

> I know this was discussed before, but did anyone ever end up with  

> some decent looking door handles that don't cost $350 each?   

> Ideally I'm looking for something that will fit with the existing  

> mechanism.

>

> PJ Seipel

> RV-10 #40032

>

>

> .

>

LarryRosen

Joined: 16 Jan 2006
Posts: 415
Location: Medford, NJ

Posted: Sat Feb 24, 2007 8:08 am Post subject: Door Handles

Here is an earlier post on the door handles by Dave.  The RV-10 handles 

are not on his web site.

Larry

zackrv8 wrote:

 	  Quote: 	

 Guys,

   Dave just made a door handle for the RV10.  It fits the existing RV10 handle assembly perfect.  Like the other RV canopy handles he makes, it mounts with just 2 set screws.  No need to put the large screw in the front.  

   We put this on tonight to check the fit.  I already had the existing holes drilled for Vans handle.  We slid the new handle on, torqued both set screws, removed the handle, center punched were the set screws made marks, and put the handle back on.  The center punch makes little divots were the set screws go and this handle does not rotate.  I tried pretty hard...but it doesn't rotate.  Good to go.

   Dave is making an aluminum insert that replaces Van's plastic cap.  He says it will be a press fit.  Just tap it in.  I'll post a pic when I get it.

   If you are interested in these handles, you can call Dave at 302-437-6087 or email him at his new email address.. dczachorowski(at)comcast.net

 Check out the pics below...

 Zack

 --------

 RV8 #80125 

 RV10 # 40512

 Read this topic online here:

 http://forums.matronics.com/viewtopic.php?p=79987#79987

 Attachments: 

 <http://forums.matronics.com//files/dsc06652_804.jpg>

 <http://forums.matronics.com//files/dsc06648_135.jpg>

 <http://forums.matronics.com//files/dsc06657_111.jpg>

 <http://forums.matronics.com//files/dsc06656_430.jpg>

rv10builder wrote:

 	  Quote: 	

 I got a very nice set of door handles from Dave Czachorowski.  His WEB 

 site is www.rivethead-aero.com.  He can be reached at (302) 437-6087 

 or by email:

 dczach86(at)hotmail.com

 Regards,

 Brian Sutherland

 Nashville, TN

 #40308

 http://www.mykitlog.com/rv10builder

 PJ Seipel wrote:

> 

>

> I know this was discussed before, but did anyone ever end up with 

> some decent looking door handles that don't cost $350 each?  Ideally 

> I'm looking for something that will fit with the existing mechanism.

>

> PJ Seipel

> RV-10 #40032

>

>

> .

>

_________________
Larry Rosen
#40356
N205EN (reserved)
<http>

zackrv8

Joined: 14 Jan 2006
Posts: 133

Posted: Sat Feb 24, 2007 3:35 pm Post subject: Re: Door Handles

PJ,



  Dave does in fact make the exterior handles that fit right on to the existing Van's door handle mechanism.  He'll even engrave them if you want.  He does not have a picture or link to it on his website but trust me,  he does have them.



  Also, coming soon, will be a bolt on replacement for the crappy square tubing that is currently the inside door handle.  Dave is currently working on a set for our RV10 and I'll post some pics as soon as I get them on the plane.



Zack



 	  seipel(at)seznam.cz wrote: 	
		  I know this was discussed before, but did anyone ever end up with some 

decent looking door handles that don't cost $350 each?  Ideally I'm 

looking for something that will fit with the existing mechanism.



PJ Seipel

RV-10 #40032

_________________
RV8 #80125
RV10 # 40512

capsteve

Joined: 09 Jan 2006
Posts: 111
Location: NIAGARA FALLS NY

Posted: Sat Feb 24, 2007 9:17 pm Post subject: Door Handles

PJ, I myself was disappointed with the stock handle so I set out to make a

better "mousetrap". This pic is just a preview. I am planning releasing the

handles officially the end of next month along with a few other cool

products.

I'm pretty proud of the results, and I've tried to keep the cost of a

complete install and retrofit kits as low as possible. Sorry for the sales

ad but I'm pretty excited about it and felt it may offer some alternative

choices....    



Steve DiNieri

40205



Iflyrv10.com

Preautoacc.com

 	  Quote: 	
		   

 I know this was discussed before, but did anyone ever end up with some

 decent looking door handles that don't cost $350 each?  Ideally I'm

 looking for something that will fit with the existing mechanism.

 

 PJ Seipel

 RV-10 #40032

capsteve

Joined: 09 Jan 2006
Posts: 111
Location: NIAGARA FALLS NY

Posted: Sat Feb 24, 2007 9:26 pm Post subject: Door Handles

Duh, pictures would help.....



PJ, I myself was disappointed with the stock handle so I set out to make a

better "mousetrap". This pic is just a preview. I am planning releasing the

handles officially the end of next month along with a few other cool

products.

I'm pretty proud of the results, and I've tried to keep the cost of a

complete install and retrofit kits as low as possible. Sorry for the sales

ad but I'm pretty excited about it and felt it may offer some alternative

choices....    



Steve DiNieri

40205



Iflyrv10.com

Preautoacc.com

 	  Quote: 	
		   

 I know this was discussed before, but did anyone ever end up with some

 decent looking door handles that don't cost $350 each?  Ideally I'm

 looking for something that will fit with the existing mechanism.

 

 PJ Seipel

 RV-10 #40032

DSC02508.JPG

Description:

Filesize:

29.87 KB

Viewed:

556 Time(s)

DSC02475.JPG

Description:

Filesize:

33.87 KB

Viewed:

570 Time(s)

DSC02479.JPG

Description:

Filesize:

21.97 KB

Viewed:

577 Time(s)

capsteve

Joined: 09 Jan 2006
Posts: 111
Location: NIAGARA FALLS NY

Posted: Sat Feb 24, 2007 9:29 pm Post subject: Door Handles

Trying to attach pics.............> 

 	  Quote: 	
		   

 

 Steve DiNieri

 40205

 

 Iflyrv10.com

 Preautoacc.com

 

 

 >

 > I know this was discussed before, but did anyone ever end up with some

 > decent looking door handles that don't cost $350 each?  Ideally I'm

 > looking for something that will fit with the existing mechanism.

 >

 > PJ Seipel

 > RV-10 #40032

 >

DSC02508_(Small).JPG

Description:

Filesize:

29.81 KB

Viewed:

525 Time(s)

DSC02475_(Small).JPG

Description:

Filesize:

33.87 KB

Viewed:

531 Time(s)

DSC02479_(Small).JPG

Description:

Filesize:

22.33 KB

Viewed:

514 Time(s)

mikedoble(at)wi.rr.com
Guest

Posted: Sun Feb 25, 2007 8:07 am Post subject: Door Handles

Steve - Those handles look great.  I can't wait to see the other products

you've come up with.



Mike

Builder 40691

Working on my tail...

www.mykitlog.com/mikedoble



--

LarryRosen

Joined: 16 Jan 2006
Posts: 415
Location: Medford, NJ

Posted: Sun Feb 25, 2007 8:37 am Post subject: Door Handles

Steve,

What happened to the door lock that was integrated into the handle that 

you showed back in November?

Do you have  an approximate price point?



Larry

#356

do not archive



Steven DiNieri wrote:

 	  Quote: 	
		   



 PJ, I myself was disappointed with the stock handle so I set out to make a

 better "mousetrap". This pic is just a preview. I am planning releasing the

 handles officially the end of next month along with a few other cool

 products.

 I'm pretty proud of the results, and I've tried to keep the cost of a

 complete install and retrofit kits as low as possible. Sorry for the sales

 ad but I'm pretty excited about it and felt it may offer some alternative

 choices....    



 Steve DiNieri

 40205



 Iflyrv10.com

 Preautoacc.com

   

> I know this was discussed before, but did anyone ever end up with some

> decent looking door handles that don't cost $350 each?  Ideally I'm

> looking for something that will fit with the existing mechanism.

>

> PJ Seipel

> RV-10 #40032

>

>

_________________
Larry Rosen
#40356
N205EN (reserved)
<http>

CJohnston(at)popsound.com
Guest

Posted: Sun Feb 25, 2007 10:17 am Post subject: Door Handles

is this new latch similar to the one in the ACS catalog?  



http://www.aircraftspruce.com/catalog/appages/doorlatch.php



it looks almost the same.  Deems - which ones are these that you installed?



http://www.deemsrv10.com/album/Sec%2045%20Cabin%20Doors%20and%20Transparancies/slides/DSC03620.html



just curious about the similarities?



cj

#40410

fuse

www.perfectlygoodairplane.net

--

millstees(at)ameritech.ne
Guest

Posted: Sun Feb 25, 2007 8:24 pm Post subject: Door Handles

Steve:



I would be interested in a set of latches...please advise price and

delivery.



Steve Mills N750SM (reserved)

RV-10 40486 Slow-build

Naperville, Illinois

finishing fuselage

Do Not Archive

--

capsteve

Joined: 09 Jan 2006
Posts: 111
Location: NIAGARA FALLS NY

Posted: Sun Feb 25, 2007 9:16 pm Post subject: Door Handles

Hi larry, there is a provision for a keylock in the handle body.(hidden from

view in the pics) The prob is the cylinder will be proud of the door skin. I

left the option up to the builder. And it can be added later..

The second option, which I'm using in this install, is the interior lock to

secure the door. When the billet handle is closed all the way the interior

handle will also close and latch. There is a small hole where I insert a

1/8" pin to "unlock" the door. Keeps it simple and secure, no keys to loose.

I'm still hammering out the numbers with the machinists, and cost will be

based on volume, but this first run will sold at 575 complete with all

hardware and instructions. And the cool thing is it'll retrofit easily into

a flying aircraft...

  

Steve 40205

Iflyrv10.com

Preautoacc.com



 	  Quote: 	
		   To: rv10-list(at)matronics.com

 Subject: Re: Door Handles

 

 

 

 Steve,

 What happened to the door lock that was integrated into the handle that

 you showed back in November?

 Do you have  an approximate price point?

 

 Larry

 #356

 do not archive

 

 Steven DiNieri wrote:

 > 

 <capsteve(at)adelphia.net>

 >

 > PJ, I myself was disappointed with the stock handle so I set out to make

 a

 > better "mousetrap". This pic is just a preview. I am planning releasing

 the

 > handles officially the end of next month along with a few other cool

 > products.

 > I'm pretty proud of the results, and I've tried to keep the cost of a

 > complete install and retrofit kits as low as possible. Sorry for the

 sales

 > ad but I'm pretty excited about it and felt it may offer some

 alternative

 > choices....

 >

 >

 >

 > Steve DiNieri

 > 40205

 >

 > Iflyrv10.com

 > Preautoacc.com

 >

 >

 >

 >> I know this was discussed before, but did anyone ever end up with some

 >> decent looking door handles that don't cost $350 each?  Ideally I'm

 >> looking for something that will fit with the existing mechanism.

 >>

 >> PJ Seipel

 >> RV-10 #40032

 >>

 >>

 >

 >

 >

 >

 >

 >

 >

 >

 >

capsteve

Joined: 09 Jan 2006
Posts: 111
Location: NIAGARA FALLS NY

Posted: Sun Feb 25, 2007 10:09 pm Post subject: Door Handles

Yup, those are the handles that I based mine on, also the south African one

is very similar. It's a great design, just needed a few tweaks....i actually

wanted the original manufacturer (who supplies acs) to make a modified

version for me for the rv10, and his price was waay off. He actually told me

he was going to advertise in the trade pubs (sport av, kitplanes, etc) and

start to sell direct to public this spring. (probably at acs price so not to

conflict)   

steve 



[quote] Subject: RE: Door Handles

 

 is this new latch similar to the one in the ACS catalog?

 

 http://www.aircraftspruce.com/catalog/appages/doorlatch.php

 

 it looks almost the same.  Deems - which ones are these that you

 installed?

 

 http://www.deemsrv10.com/album/Sec%2045%20Cabin%20Doors%20and%20Transparan

 cies/slides/DSC03620.html

 

 just curious about the similarities?

 

 cj

 #40410

 fuse

 www.perfectlygoodairplane.net

 

 

 --

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum