Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Interior paint!

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

indigoonlatigo(at)msn.com
Guest

Posted: Wed Mar 28, 2007 2:59 pm Post subject: Interior paint!

As for painting the interior, just want to let you all know that I painted 

my interior with Zolatone using two different colors and the results were 

quite nice. The tunnel cover, the aft wall and the roof will be a different 

color than the rest.



My plane will be a fairly bare bones transport tool, but the results with 

the paint are really clean and it should be very durable and stain proof. 

Only cloth will be on the seats and the armrests.



John G. 409 Do Not Archive

[quote]From: Robert Wright <flywrights(at)yahoo.com>

Reply-To: rv10-list(at)matronics.com

To: rv10-list(at)matronics.com

Subject: Re: Flutter at altitude

Date: Wed, 28 Mar 2007 14:43:12 -0700 (PDT)



Sounds like we need to convice all of our EFIS manufacturers to write a 

software update calculating a "barber pole" for the higher altitude TASs at 

DA.



Rob Wright

#392

Fuse - need to paint the interior soon - getting hot!

---

rtitsworth

Joined: 16 Jan 2006
Posts: 76
Location: Detroit, Mi

Posted: Wed Mar 28, 2007 5:22 pm Post subject: Interior paint!

Got any photo?



--

indigoonlatigo(at)msn.com
Guest

Posted: Wed Mar 28, 2007 7:40 pm Post subject: Interior paint!

I'll shot some off from the office tomorrow. I have dial up here at 

home...no other options other than satallite. My best buddy's parents who 

live in a small mountain town outside of Beruit, Lebanon have high speed and 

I can't get it here in the Santa Monica mountains outside of Los Angeles.



JOhn G.

[quote]From: "rtitsworth" <rtitsworth(at)mindspring.com>

Reply-To: rv10-list(at)matronics.com

To: <rv10-list(at)matronics.com>

Subject: RE: Interior paint!

Date: Wed, 28 Mar 2007 21:09:29 -0400






Got any photo?



--

indigoonlatigo(at)msn.com
Guest

Posted: Thu Mar 29, 2007 6:42 am Post subject: Interior paint!

HERE ARE SOME PHOTOS OF INTERIOR PAINT...ZOLATONE



[quote]From: "John Gonzalez" <indigoonlatigo(at)msn.com>

Reply-To: rv10-list(at)matronics.com

To: rv10-list(at)matronics.com

Subject: RE: Interior paint!

Date: Wed, 28 Mar 2007 20:39:22 -0700






I'll shot some off from the office tomorrow. I have dial up here at 

home...no other options other than satallite. My best buddy's parents who 

live in a small mountain town outside of Beruit, Lebanon have high speed 

and I can't get it here in the Santa Monica mountains outside of Los 

Angeles.



JOhn G.

>From: "rtitsworth" <rtitsworth(at)mindspring.com>

>Reply-To: rv10-list(at)matronics.com

>To: <rv10-list(at)matronics.com>

>Subject: RE: Interior paint!

>Date: Wed, 28 Mar 2007 21:09:29 -0400

>

>

>

>Got any photo?

>

>--

RV_10_366.jpg

Description:

Filesize:

31.93 KB

Viewed:

400 Time(s)

RV_10_373.jpg

Description:

Filesize:

20.3 KB

Viewed:

395 Time(s)

RV_10_386.jpg

Description:

Filesize:

24.87 KB

Viewed:

372 Time(s)

RV_10_387.jpg

Description:

Filesize:

25.89 KB

Viewed:

368 Time(s)

RV_10_388.jpg

Description:

Filesize:

31.77 KB

Viewed:

394 Time(s)

RV_10_389.jpg

Description:

Filesize:

26.53 KB

Viewed:

366 Time(s)

RV_10_390.jpg

Description:

Filesize:

27.91 KB

Viewed:

387 Time(s)

Vern(at)teclabsinc.com
Guest

Posted: Thu Mar 29, 2007 7:34 am Post subject: Interior paint!

John,



Very nice results and much lighter than upholstered panels. A few

questions about the process.



1. What primer did you use under the Zolatone?

2. Did you over coat the Zolatone with clear polyurethane?

3. Have you pre-fitted the cabin top or does that come later?

4. Are you installing a headliner or using Zolatone on the cabin roof?

Thanks,



Vern Smith (#324 riveting fuselage skins)

Do not archive

--

indigoonlatigo(at)msn.com
Guest

Posted: Thu Mar 29, 2007 8:06 am Post subject: Interior paint!

I used the primer that Aircraft spruce sells, but there is some confusion on 

the directions on the Zolatone web site as far as what primer is used on 

aluminum versus ferious metals.  There are conflicting statements regarding 

aluminum. Mine was a quick build fuselage and it appears that the Shermin 

Williams primer was compartible with the zolatone because the Zolatone 

overspray appears to have adherred quite well. I would test it without a 

primer if you have been using the Sherwin William's product or have a Quick 

build. Go to their web site for more information.



No overcoat is necessary, it will also make any future repairs very easy.



As you can see from the picture I did a real nice job of masking off the 

areas that interact with the cabin top. It will be easy to spot shoot and 

lapse in coverage. The cabin top has not been fitted.



The cabin top will be the same black color as the aft wall and tunnel cover. 

It is cool because it looks like fabric in that it is textured.



Hope it give some people some options to think about.



John G.

[quote]From: "Vern W. Smith" <Vern(at)teclabsinc.com>

Reply-To: rv10-list(at)matronics.com

To: <rv10-list(at)matronics.com>

Subject: RE: Interior paint!

Date: Thu, 29 Mar 2007 08:33:39 -0700






John,



Very nice results and much lighter than upholstered panels. A few

questions about the process.



1. What primer did you use under the Zolatone?

2. Did you over coat the Zolatone with clear polyurethane?

3. Have you pre-fitted the cabin top or does that come later?

4. Are you installing a headliner or using Zolatone on the cabin roof?

Thanks,



Vern Smith (#324 riveting fuselage skins)

Do not archive

--

KiloPapa

Joined: 24 May 2006
Posts: 142
Location: Pearblossom, CA

Posted: Thu Mar 29, 2007 1:04 pm Post subject: Interior paint!

What type of spray gun/size tip did you use?



Thanks,



Kevin

40494

----- Original Message Follows -----

From: "John Gonzalez" <indigoonlatigo(at)msn.com>

To: rv10-list(at)matronics.com

Subject: Spam:***********, RE: Interior paint!

Date: Thu, 29 Mar 2007 07:42:00 -0700



 	  Quote: 	
		  HERE ARE SOME PHOTOS OF INTERIOR PAINT...ZOLATONE

_________________
Kevin
40494

do not archive

indigoonlatigo(at)msn.com
Guest

Posted: Thu Mar 29, 2007 1:26 pm Post subject: Interior paint!

Go to the Zolatone web site and they tell you to use a Binks 2001, with a 

big tip on it. I don't recal the number because I could not locate one 

easily so I used a gun which shoot ceramic glaze.



John

 	  Quote: 	
		  From: kilopapa(at)antelecom.net

Reply-To: rv10-list(at)matronics.com

To: rv10-list(at)matronics.com

Subject: RE: Interior paint!

Date: Thu, 29 Mar 2007 13:03:13 -0800






What type of spray gun/size tip did you use?



Thanks,



Kevin

40494

----- Original Message Follows -----

From: "John Gonzalez" <indigoonlatigo(at)msn.com>

To: rv10-list(at)matronics.com

Subject: Spam:***********, RE: Interior paint!

Date: Thu, 29 Mar 2007 07:42:00 -0700



 >HERE ARE SOME PHOTOS OF INTERIOR PAINT...ZOLATONE

Vern(at)teclabsinc.com
Guest

Posted: Fri Mar 30, 2007 8:25 am Post subject: Interior paint!

John,



Would you please post a picture of the ceramic glaze gun you used? I did

a web search and came up with a huge assortment of different kinds and

sizes.



Vern (#324 fuselage)

Do not archive



--

rvbuilder(at)sausen.net
Guest

Posted: Fri Mar 30, 2007 8:50 am Post subject: Interior paint!

This stuff has been around for a while and is popular on some of the moldless composites like the Long because of its ability to hide inconsistencies.  Details on spray equipment and prep is here:



http://www.zolatoneaim.com/spray.html



Michael Sausen

-10 #352 Limbo



--

Vern(at)teclabsinc.com
Guest

Posted: Fri Mar 30, 2007 9:27 am Post subject: Interior paint!

Michael,



Thanks for the link. I was hoping there was an alternative to buying a

pressure feed spray gun and pot. Though it would be nice to have one.



Vern (#324)

Do not archive 



--

rvbuilder(at)sausen.net
Guest

Posted: Fri Mar 30, 2007 10:04 am Post subject: Interior paint!

For a single use application like this you might want to check Harbor Freight or others el cheapo's.  Surprisingly, several of their guns are quiet good including at least one of their pressure feeds.  Make sure you are getting a big tip though, that's the key.  Zolatone wants something in the .020 size which is quite large.



Michael



--

rv10builder(at)verizon.ne
Guest

Posted: Fri Mar 30, 2007 10:37 am Post subject: Interior paint!

On sale right now for $9.99 at HF #43430

I'll be doing my own testing today as I bought it earlier this week-

http://purplesagetradingpost.com/sumner/techinfo/HVLPspraygun.html

---

Vern(at)teclabsinc.com
Guest

Posted: Fri Mar 30, 2007 10:58 am Post subject: Interior paint!

You're absolutely right, there's no reason to spring for a high quality

setup. Something, with the right nozzle size from Harbor Freight will do

just fine. Thanks for the tip.



Vern (#324)

Do not archive



--

indigoonlatigo(at)msn.com
Guest

Posted: Fri Mar 30, 2007 11:32 am Post subject: Interior paint!

I'll try to do it today.



JOhn

[quote]From: "Vern W. Smith" <Vern(at)teclabsinc.com>

Reply-To: rv10-list(at)matronics.com

To: <rv10-list(at)matronics.com>

Subject: RE: Interior paint!

Date: Fri, 30 Mar 2007 09:25:25 -0700






John,



Would you please post a picture of the ceramic glaze gun you used? I did

a web search and came up with a huge assortment of different kinds and

sizes.



Vern (#324 fuselage)

Do not archive



--

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum