Matronics Email Lists :: View topic - Rivet Set Recommendation?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Rivet Set Recommendation?

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

sean(at)stephensville.com
Guest

Posted: Mon Nov 15, 2010 7:07 am Post subject: Rivet Set Recommendation?

What have others used for a rivet set to get the rivets on the fuse 

skins next to the spar carry through in the attached pic?  I don't have 

a swivel flush set, but maybe that would work?



Thanks,



-Sean #40303

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

IMG_0543.jpg

Description:

Filesize:

1 MB

Viewed:

4562 Time(s)

Neal.George(at)hurlburt.a
Guest

Posted: Mon Nov 15, 2010 8:54 am Post subject: Rivet Set Recommendation?

I believe I'd back-shoot those...



neal



================

What have others used for a rivet set to get the rivets on the fuse skins

next to the spar carry through in the attached pic?  I don't have a swivel

flush set, but maybe that would work?



Thanks,



-Sean #40303

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

smime.p7s

Description:

Download

Filename:

smime.p7s

Filesize:

5.09 KB

Downloaded:

381 Time(s)

sean(at)stephensville.com
Guest

Posted: Mon Nov 15, 2010 10:39 am Post subject: Rivet Set Recommendation?

The shop side of these are inside the side channel, so they can't be 

back shot.  The forward ones can, but not the aft side.



On 11/15/10 10:44 AM, George, Neal E Capt USAF ACC 505 TRS/DOJ wrote:

 	  Quote: 	
		   I believe I'd back-shoot those...



 neal



 ================

 What have others used for a rivet set to get the rivets on the fuse skins

 next to the spar carry through in the attached pic?  I don't have a swivel

 flush set, but maybe that would work?



 Thanks,



 -Sean #40303

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

seipel(at)seznam.cz
Guest

Posted: Mon Nov 15, 2010 11:08 am Post subject: Rivet Set Recommendation?

I used http://www.yardstore.com/browse.cfm/4,3673.html



The face is curved enough to give you room for the rivet gun and still 

keep it flat on the rivet.



PJ Seipel

RV-10 #40032



On 11/15/2010 10:04 AM, Sean Stephens wrote:

 	  Quote: 	
		   What have others used for a rivet set to get the rivets on the fuse

 skins next to the spar carry through in the attached pic? I don't have a

 swivel flush set, but maybe that would work?



 Thanks,



 -Sean #40303

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

10090.jpg

Description:

Filesize:

9.34 KB

Viewed:

4551 Time(s)

sean(at)stephensville.com
Guest

Posted: Mon Nov 15, 2010 2:27 pm Post subject: Rivet Set Recommendation?

Thanks for the link.  For some reason the Yard Store slipped my mind.



I'm wondering if I'd get additional use out of a flush "C" set which 

also seems like it would do the job.



http://www.yardstore.com/browse.cfm/4,3664.html



-Sean #40303



On 11/15/10 1:06 PM, PJ Seipel wrote:

 	  Quote: 	
		   I used http://www.yardstore.com/browse.cfm/4,3673.html



 The face is curved enough to give you room for the rivet gun and still 

 keep it flat on the rivet.



 PJ Seipel

 RV-10 #40032



 On 11/15/2010 10:04 AM, Sean Stephens wrote:

> What have others used for a rivet set to get the rivets on the fuse

> skins next to the spar carry through in the attached pic? I don't have a

> swivel flush set, but maybe that would work?

>

> Thanks,

>

> -Sean #40303

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Andy Turner

Joined: 10 Jan 2006
Posts: 31
Location: Clarion, PA

Posted: Mon Nov 15, 2010 7:29 pm Post subject: Re: Rivet Set Recommendation?

I worried about those rivets and put them off for a while, as well as the rivets around the rear spar attach. Turned out though that my Avery swivel flush set worked fine. I pushed the rubber guard up against the spar, and there was just enough room to get good meat on the rivet, if that makes sense.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Andy Turner

sean(at)stephensville.com
Guest

Posted: Sat Nov 20, 2010 2:29 pm Post subject: Rivet Set Recommendation?

Just an update for those not to the fuse side skins yet.  I actually 

went with the 7 1/2 inch version of what PJ linked below just to make 

sure I cleared the spar with the rivet gun.

http://www.yardstore.com/browse.cfm/4,3741.html

This worked great for the fuse side skins next to the spar.  I wish I 

had this set when doing the bottom wing skins next to the flap attach 

also.  One note, that is similar for other longer rivet sets.  It takes 

quite a bit more pressure with the added length.  This is one of those 

places that I wished I had gotten a 3x gun instead of a 2x.

-Sean #40303 (long and nasty section 29 almost complete)

On 11/15/10 1:06 PM, PJ Seipel wrote:

 	  Quote: 	
		  > I used http://www.yardstore.com/browse.cfm/4,3673.html

>

> The face is curved enough to give you room for the rivet gun and 

> still keep it flat on the rivet.

>

> PJ Seipel

> RV-10 #40032

>

> On 11/15/2010 10:04 AM, Sean Stephens wrote:

>> What have others used for a rivet set to get the rivets on the fuse

>> skins next to the spar carry through in the attached pic? I don't 

>> have a

>> swivel flush set, but maybe that would work?

>>

>> Thanks,

>>

>> -Sean #40303

>>

>>

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

rv10flyer

Joined: 25 Aug 2009
Posts: 364

Posted: Sat Nov 20, 2010 3:06 pm Post subject: I used my long back rivet set

on the rivets near flap hinges and these. Already had this tool and did not want to buy another tool for just a few places. Just put masking tape over rivets to help keep it from sliding, have a helper on the other side and keep your set straight.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Wayne G.

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum