Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Performance Yak 52
Goto page Previous  1, 2, 3
 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
havard.dale(at)yaknorway.
Guest





PostPosted: Wed Jul 10, 2013 7:18 am    Post subject: Performance Yak 52 Reply with quote

Intresting,
But The Email adress is not in use?
Do you have pictures and more info on The wing kit?
BR
Havard

Sendt fra min iPhone 4S

Den 10. juli 2013 kl. 16:41 skrev Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>:
[quote]
During a recent visit to the Ukraine , I visited his factory. Sergey (serge) is a graduate of the MiG institute in Moscow. He is a composite specialist .I have commissioned a set of yak composite wings from him, myself. I can vouch for him , he is a very demure quiet man with little to say but enormous experience.
Brad


Sent from Samsung Mobile

-------- Original message --------
From: Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52


Sure its Sergey orlov and his company is airnotika ill put the email address up later on today


Sent from Samsung Mobile

-------- Original message --------
From: "Roger Kemp M.D." <viperdoc(at)mindspring.com (viperdoc(at)mindspring.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52


Interesting. Bradly do you have a web address or an email address for them. Google gave me some interior design company in Ontario, Canada.
Thanks,
Doc
Dale was not trying to be a pompous American. The T-6 (SNJ) was fitted with a tail hook for carrier qualifications. That design capability could feasibly be engineered for the 52, not that I have any interest in that. Now the wings that Bradly spoke of has peaked my interest.
Thanks,
Doc

Sent from my iPad

On Jul 10, 2013, at 8:10 AM, Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)> wrote:
Quote:

If you're looking for a major weight improvement , , the Orlov design bureau in Odessa can sort you out with a set of composite wings +7-4 g in the TD configuration. Same wing design only with slotted flaps on each wing with electrical multi position actuator. 90L per side with intergrated tanks .Standard yak air operated retractable gear. All in for around $26, 000.
Regards
Brad Banks


Sent from Samsung Mobile

-------- Original message --------
From: Dale <dale(at)frii.com (dale(at)frii.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Yak-List: Re: Performance Yak 52


--> Yak-List message posted by: "Dale" <dale(at)frii.com (dale(at)frii.com)>

I wasn't talking about the BS tail hook stuff.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=404361#404361
==========================p; --> http://www========================================================================================================bsp;   -Matt Dra========================================================

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a© ŠËD™¨¥Šî™K¶Å’jÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…« ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬®Œ,x(Z´P>-¢ÈZ­æ§vkϠkϠj+y¨kyøm¶Ÿÿà &jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8Ã’IaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨g›J+^N§“*.~Šò¢êàzw«¢ë,ºšh®Ó¶ÐëjY^.+-Ù¢¨kyøm¶Ÿÿà &jÚèž',r‰¿r䒨&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf
Quote:


===================================
courier new,courier">http://www.matronics.com/Navigator?Yak-List
===================================
cs.com
===================================
matronics.com/contribution
===================================


���~��,�

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a© ŠËD™¨¥Šî™K¶ŒjÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…« ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬®Œ,x(Z´P>-¢ÈZ­æ§vkœ†kœ†j+y¨kyøm¶Ÿÿà &jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8ÒIaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨g›J+^N§“*.~Šò¢êàzw«¢ë,ºšh®Ó¶ÐëjY^.+-Ù¢¨kyøm¶Ÿÿà &jÚèž',r‰¿r‰í®&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf
[b]


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
Dawg



Joined: 19 May 2013
Posts: 355

PostPosted: Wed Jul 10, 2013 7:52 am    Post subject: Performance Yak 52 Reply with quote

Easy big guy.

Bill

On Jul 10, 2013, at 6:56 AM, "Dale" <dale(at)frii.com> wrote:

Quote:


I wasn't talking about the BS tail hook stuff.




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=404361#404361












- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

_________________
Dawg
Back to top
View user's profile Send private message
brad(at)runawaymedia.co.z
Guest





PostPosted: Wed Jul 10, 2013 7:59 am    Post subject: Performance Yak 52 Reply with quote

Hello,  the only address that I have for Sergey is airnotica(at)gmail.com. 
Not sure why the email isn't working. 
Serge has all the technical information regarding this project, it is by no means a commercial venture yet with a production line.  But if you would like to be part of a select group of HP 52TD's then by all means join us. My design brief was that the composite set were to fit directly on to any existing 52  as a kit. Along with the electrical modifications. 
Brad Banks


Sent from Samsung Mobile

-------- Original message --------
From: Håvard Dale <havard.dale(at)yaknorway.com>
Date:
To: yak-list(at)matronics.com
Subject: Re: Yak-List: Re: Performance Yak 52


Intresting, 
But The Email adress is not in use?
Do you have pictures and more info on The wing kit?
BR
Havard 

Sendt fra min iPhone 4S

Den 10. juli 2013 kl. 16:41 skrev Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>:
[quote]
During a recent visit to the Ukraine , I visited his factory. Sergey (serge) is a graduate of the MiG institute in Moscow. He is a composite specialist .I have commissioned a set of yak composite wings from him, myself. I can vouch for him , he is a very demure quiet man with little to say but enormous experience. 
Brad


Sent from Samsung Mobile

-------- Original message --------
From: Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Yak-List: Re: Performance Yak 52


Sure its Sergey orlov and his company is airnotika ill put the email address up later on today


Sent from Samsung Mobile

-------- Original message --------
From: "Roger Kemp M.D." <viperdoc(at)mindspring.com (viperdoc(at)mindspring.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Yak-List: Re: Performance Yak 52


Interesting. Bradly do you have a web address or an email address for them. Google gave me some interior design company in Ontario, Canada.
Thanks,
Doc
Dale was not trying to be a pompous American. The T-6 (SNJ) was fitted with a tail hook for carrier qualifications. That design capability could feasibly be engineered for the 52, not that I have any interest in that. Now the wings that Bradly spoke of has peaked my interest.
Thanks,
Doc

Sent from my iPad

On Jul 10, 2013, at 8:10 AM, Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)> wrote:
Quote:

If you're looking for a major weight improvement , , the Orlov design bureau in Odessa can sort you out with a set of composite wings +7-4 g in the TD configuration.  Same wing design only with slotted flaps on each wing with electrical  multi position actuator.  90L per side with intergrated tanks .Standard yak air operated retractable gear. All in for around $26, 000.
Regards
Brad Banks


Sent from Samsung Mobile

-------- Original message --------
From: Dale <dale(at)frii.com (dale(at)frii.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Yak-List: Re: Performance Yak 52


--> Yak-List message posted by: "Dale" <dale(at)frii.com (dale(at)frii.com)>

I wasn't talking about the BS tail hook stuff.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=404361#404361
==========================p; --> http://www========================================================================================================bsp;                        -Matt Dra========================================================

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a© ŠËD™¨¥Šî™K¶Å’jÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…« ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬®Œ,x(Z´P>-¢ÈZ­æ§vkϠkϠj+y¨kyøm¶Ÿÿà &jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8Ã’IaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨g›J+^N§“*.~Šò¢êàzw«¢ë,ºšh®Ó¶ÐëjY^.+-Ù¢¨kyøm¶Ÿÿà &jÚèž',r‰¿r䒨&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf
Quote:


===================================
courier new,courier">
http://www.matronics.com/Navigator?Yak-List
===================================
cs.com
===================================
matronics.com/contribution
===================================


���~��,�

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a© ŠËD™¨¥Šî™K¶ŒjÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…« ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬®Œ,x(Z´P>-¢ÈZ­æ§vkœ†kœ†j+y¨kyøm¶Ÿÿà &jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8ÒIaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨g›J+^N§“*.~Šò¢êàzw«¢ë,ºšh®Ó¶ÐëjY^.+-Ù¢¨kyøm¶Ÿÿà &jÚèž',r‰¿r‰í®&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf
[b]


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
brad(at)runawaymedia.co.z
Guest





PostPosted: Wed Jul 10, 2013 8:00 am    Post subject: Performance Yak 52 Reply with quote

My mistake its airnotika(at)gmail.com


Sent from Samsung Mobile

-------- Original message --------
From: Håvard Dale <havard.dale(at)yaknorway.com>
Date:
To: yak-list(at)matronics.com
Subject: Re: Yak-List: Re: Performance Yak 52


Intresting, 
But The Email adress is not in use?
Do you have pictures and more info on The wing kit?
BR
Havard 

Sendt fra min iPhone 4S

Den 10. juli 2013 kl. 16:41 skrev Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>:
[quote]
During a recent visit to the Ukraine , I visited his factory. Sergey (serge) is a graduate of the MiG institute in Moscow. He is a composite specialist .I have commissioned a set of yak composite wings from him, myself. I can vouch for him , he is a very demure quiet man with little to say but enormous experience. 
Brad


Sent from Samsung Mobile

-------- Original message --------
From: Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Yak-List: Re: Performance Yak 52


Sure its Sergey orlov and his company is airnotika ill put the email address up later on today


Sent from Samsung Mobile

-------- Original message --------
From: "Roger Kemp M.D." <viperdoc(at)mindspring.com (viperdoc(at)mindspring.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Yak-List: Re: Performance Yak 52


Interesting. Bradly do you have a web address or an email address for them. Google gave me some interior design company in Ontario, Canada.
Thanks,
Doc
Dale was not trying to be a pompous American. The T-6 (SNJ) was fitted with a tail hook for carrier qualifications. That design capability could feasibly be engineered for the 52, not that I have any interest in that. Now the wings that Bradly spoke of has peaked my interest.
Thanks,
Doc

Sent from my iPad

On Jul 10, 2013, at 8:10 AM, Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)> wrote:
Quote:

If you're looking for a major weight improvement , , the Orlov design bureau in Odessa can sort you out with a set of composite wings +7-4 g in the TD configuration.  Same wing design only with slotted flaps on each wing with electrical  multi position actuator.  90L per side with intergrated tanks .Standard yak air operated retractable gear. All in for around $26, 000.
Regards
Brad Banks


Sent from Samsung Mobile

-------- Original message --------
From: Dale <dale(at)frii.com (dale(at)frii.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Yak-List: Re: Performance Yak 52


--> Yak-List message posted by: "Dale" <dale(at)frii.com (dale(at)frii.com)>

I wasn't talking about the BS tail hook stuff.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=404361#404361
==========================p; --> http://www========================================================================================================bsp;                        -Matt Dra========================================================

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a© ŠËD™¨¥Šî™K¶Å’jÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…« ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬®Œ,x(Z´P>-¢ÈZ­æ§vkϠkϠj+y¨kyøm¶Ÿÿà &jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8Ã’IaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨g›J+^N§“*.~Šò¢êàzw«¢ë,ºšh®Ó¶ÐëjY^.+-Ù¢¨kyøm¶Ÿÿà &jÚèž',r‰¿r䒨&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf
Quote:


===================================
courier new,courier">
http://www.matronics.com/Navigator?Yak-List
===================================
cs.com
===================================
matronics.com/contribution
===================================


���~��,�

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a© ŠËD™¨¥Šî™K¶ŒjÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…« ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬®Œ,x(Z´P>-¢ÈZ­æ§vkœ†kœ†j+y¨kyøm¶Ÿÿà &jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8ÒIaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨g›J+^N§“*.~Šò¢êàzw«¢ë,ºšh®Ó¶ÐëjY^.+-Ù¢¨kyøm¶Ÿÿà &jÚèž',r‰¿r‰í®&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf
[b]


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
bwade154(at)yahoo.com
Guest





PostPosted: Wed Jul 10, 2013 2:08 pm    Post subject: Performance Yak 52 Reply with quote

Guys a very good friend of mine had a very bad experience with Serge, back in 2001. I purchased my Yak from Termikas and he really like the Yak 52 so he did a deal with Serge. Serge missed the delivery time and keep leading my friend on until he demanded delivery my friend got a nicely painted 5G derelict many parts were missing and all data plates removed an M14 N or II defiantly not a flying airplane. He went on to buy a damaged yak and used the derelicts parts to make a nice airplane. I was truly amazed that all skin parts matched up perfectly. Would not deal with Serge not trustworthy in my book, would deal with Termikas what he says is what you get!!
Bill Wade N4450Y






Serge has all the technical information regarding this project, it is by no means a commercial venture yet with a production line. But if you would like to be part of a select group of HP 52TD's then by all means join us. My design brief was that the composite set were to fit directly on to any existing 52 as a kit. Along with the electrical modifications.


Brad Banks




Sent from Samsung Mobile

-------- Original message --------
From: Håvard Dale <havard.dale(at)yaknorway.com>
Date:
To: yak-list(at)matronics.com
Subject: Re: Re: Performance Yak 52
Intresting,


But The Email adress is not in use?


Do you have pictures and more info on The wing kit?


BR
Havard

Sendt fra min iPhone 4S

Den 10. juli 2013 kl. 16:41 skrev Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>:
[quote]
During a recent visit to the Ukraine , I visited his factory. Sergey (serge) is a graduate of the MiG institute in Moscow. He is a composite specialist .I have commissioned a set of yak composite wings from him, myself. I can vouch for him , he is a very demure quiet man with little to say but enormous experience.
Brad




Sent from Samsung Mobile

-------- Original message --------
From: Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52


Sure its Sergey orlov and his company is airnotika ill put the email address up later on today




Sent from Samsung Mobile

-------- Original message --------
From: "Roger Kemp M.D." <viperdoc(at)mindspring.com (viperdoc(at)mindspring.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52
Interesting. Bradly do you have a web address or an email address for them. Google gave me some interior design company in Ontario, Canada.
Thanks,
Doc


Dale was not trying to be a pompous American. The T-6 (SNJ) was fitted with a tail hook for carrier qualifications. That design capability could feasibly be engineered for the 52, not that I have any interest in that. Now the wings that Bradly spoke of has peaked my interest.
Thanks,
Doc

Sent from my iPad

On Jul 10, 2013, at 8:10 AM, Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)> wrote:
Quote:

If you're looking for a major weight improvement , , the Orlov design bureau in Odessa can sort you out with a set of composite wings +7-4 g in the TD configuration. Same wing design only with slotted flaps on each wing with electrical multi position actuator. 90L per side with intergrated tanks .Standard yak air operated retractable gear. All in for around $26, 000.


Regards
Brad Banks




Sent from Samsung Mobile

-------- Original message --------
From: Dale <dale(at)frii.com (dale(at)frii.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Performance Yak 52
--> Yak-List message posted by: "Dale" <dale(at)frii.com (dale(at)frii.com)>

I wasn't talking about the BS tail hook stuff.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=404361#404361
==========================p; --> http://www=============================bsp;     -Matt Dra===============================

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a©ŠËD™¨¥Šî™K¶ŒjÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…«ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬Â®Œ,x(Z´P>-¢ÈZ­æ§vkϠkϠj+y¨kyøm¶ŸÿÃ&jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8Ã’IaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨Âg›J+^N§“*.~Šò¢êà zw«¢ë,ºšh®Ó¶ÃëjY^.+-٢¨kyøm¶ŸÿÃ&jÚèž',r‰¿r䒨&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf
< /BLOCKQUOTE>[/url]
Quote:


==========
courier new,courier">
[url=http://www.matronics.com/Navigator?Yak-List]http://www.matronics.com/Navigator?Yak-List
==========
cs.com
==========
matronics.com/contribution
==========


���~��,�

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a©ŠËD™¨¥Šî™K¶ŒjÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…«ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬®Œ,x(Z´P>-¢ÈZ­æ§vkœ†kœ†j+y¨kyøm¶ŸÿÃ&jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8ÒIaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨g›J+^N§“*.~Šò¢êàzw«¢ë,ºšh®Ó¶ÐëjY^.+-Ù¢¨kyøm¶ŸÿÃ&jÚèž',r‰¿r‰í®&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf


=nofollow target=_blank>http://www.matronics.com/Navigator?Yak-List
et=_blank>http://forums.matronics.com/
llow target=_blank>http://www.matronics.com/contribution



var __chd__ = {"aid": 10345, "chaid": "freecause"};(function() { var c = document.createElement('script'); c.type = 'text/javascript'; c.async = true;c.src = ('https:' == document.location.protocol ? 'https://z': 'http://p') + '.chango.com/static/c.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(c, s);})();
[quote][b]


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
havard.dale(at)yaknorway.
Guest





PostPosted: Wed Jul 10, 2013 2:26 pm    Post subject: Performance Yak 52 Reply with quote

Noted!
I also have only god experience with Termikas!
BR
Havard
Sendt fra min iPhone 4S

Den 11. juli 2013 kl. 00:04 skrev bill wade <bwade154(at)yahoo.com (bwade154(at)yahoo.com)>:
[quote]Guys a very good friend of mine had a very bad experience with Serge, back in 2001. I purchased my Yak from Termikas and he really like the Yak 52 so he did a deal with Serge. Serge missed the delivery time and keep leading my friend on until he demanded delivery my friend got a nicely painted 5G derelict many parts were missing and all data plates removed an M14 N or II defiantly not a flying airplane. He went on to buy a damaged yak and used the derelicts parts to make a nice airplane. I was truly amazed that all skin parts matched up perfectly. Would not deal with Serge not trustworthy in my book, would deal with Termikas what he says is what you get!!
Bill Wade N4450Y






Serge has all the technical information regarding this project, it is by no means a commercial venture yet with a production line. But if you would like to be part of a select group of HP 52TD's then by all means join us. My design brief was that the composite set were to fit directly on to any existing 52 as a kit. Along with the electrical modifications.


Brad Banks




Sent from Samsung Mobile

-------- Original message --------
From: Håvard Dale <havard.dale(at)yaknorway.com (havard.dale(at)yaknorway.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52
Intresting,


But The Email adress is not in use?


Do you have pictures and more info on The wing kit?


BR
Havard

Sendt fra min iPhone 4S

Den 10. juli 2013 kl. 16:41 skrev Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>:
Quote:

During a recent visit to the Ukraine , I visited his factory. Sergey (serge) is a graduate of the MiG institute in Moscow. He is a composite specialist .I have commissioned a set of yak composite wings from him, myself. I can vouch for him , he is a very demure quiet man with little to say but enormous experience.
Brad




Sent from Samsung Mobile

-------- Original message --------
From: Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52


Sure its Sergey orlov and his company is airnotika ill put the email address up later on today




Sent from Samsung Mobile

-------- Original message --------
From: "Roger Kemp M.D." <viperdoc(at)mindspring.com (viperdoc(at)mindspring.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52
Interesting. Bradly do you have a web address or an email address for them. Google gave me some interior design company in Ontario, Canada.
Thanks,
Doc


Dale was not trying to be a pompous American. The T-6 (SNJ) was fitted with a tail hook for carrier qualifications. That design capability could feasibly be engineered for the 52, not that I have any interest in that. Now the wings that Bradly spoke of has peaked my interest.
Thanks,
Doc

Sent from my iPad

On Jul 10, 2013, at 8:10 AM, Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)> wrote:
Quote:

If you're looking for a major weight improvement , , the Orlov design bureau in Odessa can sort you out with a set of composite wings +7-4 g in the TD configuration. Same wing design only with slotted flaps on each wing with electrical multi position actuator. 90L per side with intergrated tanks .Standard yak air operated retractable gear. All in for around $26, 000.


Regards
Brad Banks




Sent from Samsung Mobile

-------- Original message --------
From: Dale <dale(at)frii.com (dale(at)frii.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Yak-List: Re: Performance Yak 52
--> Yak-List message posted by: "Dale" <dale(at)frii.com (dale(at)frii.com)>

I wasn't talking about the BS tail hook stuff.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=404361#404361
==========================p; --> http://www=============================bsp;   -Matt Dra===============================

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a©ŠËD™¨¥Šî™K¶ŒjÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…«ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬Â®Œ,x(Z´P>-¢ÈZ­æ§vkϠkϠj+y¨kyøm¶ŸÿÃ&jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8Ã’IaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨Âg›J+^N§“*.~Šò¢êà zw«¢ë,ºšh®Ó¶ÃëjY^.+-٢¨kyøm¶ŸÿÃ&jÚèž',r‰¿r䒨&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf
< /BLOCKQUOTE>[/url]
Quote:


==========
courier new,courier">
[url=http://www.matronics.com/Navigator?Yak-List]http://www.matronics.com/Navigator?Yak-List
==========
cs.com
==========
matronics.com/contribution
==========


���~��,�

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a©ŠËD™¨¥Šî™K¶ŒjÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…«ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬®Œ,x(Z´P>-¢ÈZ­æ§vkœ†kœ†j+y¨kyøm¶ŸÿÃ&jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8ÒIaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨g›J+^N§“*.~Šò¢êàzw«¢ë,ºšh®Ó¶ÐëjY^.+-Ù¢¨kyøm¶ŸÿÃ&jÚèž',r‰¿r‰í®&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf


=nofollow target=_blank>http://www.matronics.com/Navigator?Yak-List
et=_blank>http://forums.matronics.com/
llow target=_blank>http://www.matronics.com/contribution



var __chd__ = {"aid": 10345, "chaid": "freecause"};(function() { var c = document.createElement('script'); c.type = 'text/javascript'; c.async = true;c.src = ('https:' == document.location.protocol ? 'https://z': 'http://p') + '.chango.com/static/c.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(c, s);})();
Quote:


===================================
//www.matronics.com/Navigator?Yak-List
===================================
cs.com
===================================
matronics.com/contribution
===================================


[b]


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
Dale



Joined: 30 May 2007
Posts: 178

PostPosted: Wed Jul 10, 2013 4:14 pm    Post subject: Re: Performance Yak 52 Reply with quote

Did a quick calculation of my Radial Rocket which like the Yak is also not a stol aircraft.
WITHOUT the Mark 52 tailhook conversion is 1650 lbs empty, 300 lbs lighter than a stripped 52 or 500 lbs lighter than a stock one. ROCKET has a 400+ hp, MT simitar. 3 blade prop and true electric flaps not speed brakes. SPEC shows a 800 ft take off roll or 9 seconds followed by a 3500 fpm climb with pilot and standard fuel loaded. Not a Yak I know. Lighter faster food for thought. Load it up and numbers change fast.

HAY BILL Razz
Dale


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
View user's profile Send private message
brad(at)runawaymedia.co.z
Guest





PostPosted: Wed Jul 10, 2013 10:46 pm    Post subject: Performance Yak 52 Reply with quote

Thanks Bill, this why this forum is so important.  I have asked for a reply, to establish the other side of the story.  Ill keep you posted. 
Brad


Sent from Samsung Mobile

-------- Original message --------
From: Håvard Dale <havard.dale(at)yaknorway.com>
Date:
To: yak-list(at)matronics.com
Subject: Re: Yak-List: Re: Performance Yak 52


Noted!
I also have only god experience with Termikas!
BR
Havard
Sendt fra min iPhone 4S

Den 11. juli 2013 kl. 00:04 skrev bill wade <bwade154(at)yahoo.com (bwade154(at)yahoo.com)>:
[quote]Guys a very good friend of mine had a very bad experience with Serge, back in 2001. I purchased my Yak from Termikas and he really like the Yak 52 so he did a deal with Serge. Serge missed the delivery time and keep leading my friend on until he demanded delivery my friend got a nicely painted 5G derelict many parts were missing and all data plates removed an M14 N or II defiantly not a flying airplane. He went on to buy a damaged yak and used the derelicts parts to make a nice airplane. I was truly amazed that all skin parts matched up perfectly. Would not deal with Serge not trustworthy in my book, would deal with Termikas what he says is what you get!!
Bill Wade N4450Y
 
 
 
 
 
 
Serge has all the technical information regarding this project, it is by no means a commercial venture yet with a production line.  But if you would like to be part of a select group of HP 52TD's then by all means join us. My design brief was that the composite set were to fit directly on to any existing 52  as a kit. Along with the electrical modifications. 


Brad Banks




Sent from Samsung Mobile

-------- Original message --------
From: Håvard Dale <havard.dale(at)yaknorway.com (havard.dale(at)yaknorway.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Yak-List: Re: Performance Yak 52
Intresting, 


But The Email adress is not in use?


Do you have pictures and more info on The wing kit?


BR
Havard 

Sendt fra min iPhone 4S

Den 10. juli 2013 kl. 16:41 skrev Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>:
Quote:

During a recent visit to the Ukraine , I visited his factory. Sergey (serge) is a graduate of the MiG institute in Moscow. He is a composite specialist .I have commissioned a set of yak composite wings from him, myself. I can vouch for him , he is a very demure quiet man with little to say but enormous experience. 
Brad




Sent from Samsung Mobile

-------- Original message --------
From: Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Yak-List: Re: Performance Yak 52


Sure its Sergey orlov and his company is airnotika ill put the email address up later on today




Sent from Samsung Mobile

-------- Original message --------
From: "Roger Kemp M.D." <viperdoc(at)mindspring.com (viperdoc(at)mindspring.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Yak-List: Re: Performance Yak 52
Interesting. Bradly do you have a web address or an email address for them. Google gave me some interior design company in Ontario, Canada.
Thanks,
Doc


Dale was not trying to be a pompous American. The T-6 (SNJ) was fitted with a tail hook for carrier qualifications. That design capability could feasibly be engineered for the 52, not that I have any interest in that. Now the wings that Bradly spoke of has peaked my interest.
Thanks,
Doc

Sent from my iPad

On Jul 10, 2013, at 8:10 AM, Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)> wrote:
Quote:

If you're looking for a major weight improvement , , the Orlov design bureau in Odessa can sort you out with a set of composite wings +7-4 g in the TD configuration.  Same wing design only with slotted flaps on each wing with electrical  multi position actuator.  90L per side with intergrated tanks .Standard yak air operated retractable gear. All in for around $26, 000.


Regards
Brad Banks




Sent from Samsung Mobile

-------- Original message --------
From: Dale <dale(at)frii.com (dale(at)frii.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Yak-List: Re: Performance Yak 52
--> Yak-List message posted by: "Dale" <dale(at)frii.com (dale(at)frii.com)>

I wasn't talking about the BS tail hook stuff.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=404361#404361
==========================p; --> http://www=============================bsp;                        -Matt Dra===============================

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a©ŠËD™¨¥Šî™K¶ŒjÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…«ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬Â®Œ,x(Z´P>-¢ÈZ­æ§vkϠkϠj+y¨kyøm¶ŸÿÃ&jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8Ã’IaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨Âg›J+^N§“*.~Šò¢êàzw«¢ë,ºšh®Ó¶ÃëjY^.+-٢¨kyøm¶ŸÿÃ&jÚèž',r‰¿r䒨&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf
< /BLOCKQUOTE>[/url]
Quote:


==========
courier new,courier">
[url=http://www.matronics.com/Navigator?Yak-List]http://www.matronics.com/Navigator?Yak-List
==========
cs.com
==========
matronics.com/contribution
==========


���~��,�

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a©ŠËD™¨¥Šî™K¶ŒjÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…«ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬®Œ,x(Z´P>-¢ÈZ­æ§vkœ†kœ†j+y¨kyøm¶ŸÿÃ&jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8ÒIaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨g›J+^N§“*.~Šò¢êàzw«¢ë,ºšh®Ó¶ÐëjY^.+-Ù¢¨kyøm¶ŸÿÃ&jÚèž',r‰¿r‰í®&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf


=nofollow target=_blank>http://www.matronics.com/Navigator?Yak-List
et=_blank>http://forums.matronics.com/
llow target=_blank>http://www.matronics.com/contribution



var __chd__ = {"aid": 10345, "chaid": "freecause"};(function() { var c = document.createElement('script'); c.type = 'text/javascript'; c.async = true;c.src = ('https:' == document.location.protocol ? 'https://z': 'http://p') + '.chango.com/static/c.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(c, s);})();
Quote:


===================================
//www.matronics.com/Navigator?Yak-List
===================================
cs.com
===================================
matronics.com/contribution
===================================


[b]


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
invert33(at)gmail.com
Guest





PostPosted: Wed Jul 10, 2013 11:07 pm    Post subject: Performance Yak 52 Reply with quote

I have heard similar stories about Serge, no direct experience. Always 2 sides to every story of course.
Art

On 11/07/2013, at 4:33 PM, Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)> wrote:
[quote]
Thanks Bill, this why this forum is so important.  I have asked for a reply, to establish the other side of the story.  Ill keep you posted.
Brad


Sent from Samsung Mobile

-------- Original message --------
From: Håvard Dale <havard.dale(at)yaknorway.com (havard.dale(at)yaknorway.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52


Noted!
I also have only god experience with Termikas!
BR
Havard
Sendt fra min iPhone 4S

Den 11. juli 2013 kl. 00:04 skrev bill wade <bwade154(at)yahoo.com (bwade154(at)yahoo.com)>:
Quote:
Guys a very good friend of mine had a very bad experience with Serge, back in 2001. I purchased my Yak from Termikas and he really like the Yak 52 so he did a deal with Serge. Serge missed the delivery time and keep leading my friend on until he demanded delivery my friend got a nicely painted 5G derelict many parts were missing and all data plates removed an M14 N or II defiantly not a flying airplane. He went on to buy a damaged yak and used the derelicts parts to make a nice airplane. I was truly amazed that all skin parts matched up perfectly. Would not deal with Serge not trustworthy in my book, would deal with Termikas what he says is what you get!!
Bill Wade N4450Y






Serge has all the technical information regarding this project, it is by no means a commercial venture yet with a production line. But if you would like to be part of a select group of HP 52TD's then by all means join us. My design brief was that the composite set were to fit directly on to any existing 52 as a kit. Along with the electrical modifications.


Brad Banks




Sent from Samsung Mobile

-------- Original message --------
From: Håvard Dale <havard.dale(at)yaknorway.com (havard.dale(at)yaknorway.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52
Intresting,


But The Email adress is not in use?


Do you have pictures and more info on The wing kit?


BR
Havard

Sendt fra min iPhone 4S

Den 10. juli 2013 kl. 16:41 skrev Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>:
Quote:

During a recent visit to the Ukraine , I visited his factory. Sergey (serge) is a graduate of the MiG institute in Moscow. He is a composite specialist .I have commissioned a set of yak composite wings from him, myself. I can vouch for him , he is a very demure quiet man with little to say but enormous experience.
Brad




Sent from Samsung Mobile

-------- Original message --------
From: Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52


Sure its Sergey orlov and his company is airnotika ill put the email address up later on today




Sent from Samsung Mobile

-------- Original message --------
From: "Roger Kemp M.D." <viperdoc(at)mindspring.com (viperdoc(at)mindspring.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52
Interesting. Bradly do you have a web address or an email address for them. Google gave me some interior design company in Ontario, Canada.
Thanks,
Doc


Dale was not trying to be a pompous American. The T-6 (SNJ) was fitted with a tail hook for carrier qualifications. That design capability could feasibly be engineered for the 52, not that I have any interest in that. Now the wings that Bradly spoke of has peaked my interest.
Thanks,
Doc

Sent from my iPad

On Jul 10, 2013, at 8:10 AM, Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)> wrote:
Quote:

If you're looking for a major weight improvement , , the Orlov design bureau in Odessa can sort you out with a set of composite wings +7-4 g in the TD configuration. Same wing design only with slotted flaps on each wing with electrical multi position actuator. 90L per side with intergrated tanks .Standard yak air operated retractable gear. All in for around $26, 000.


Regards
Brad Banks




Sent from Samsung Mobile

-------- Original message --------
From: Dale <dale(at)frii.com (dale(at)frii.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Yak-List: Re: Performance Yak 52
--> Yak-List message posted by: "Dale" <dale(at)frii.com (dale(at)frii.com)>

I wasn't talking about the BS tail hook stuff.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=404361#404361
==========================p; --> http://www=============================bsp;   -Matt Dra===============================

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a©ŠËD™¨¥Šî™K¶ŒjÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…«ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬Â®Œ,x(Z´P>-¢ÈZ­æ§vkϠkϠj+y¨kyøm¶ŸÿÃ&jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8Ã’IaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨Âg›J+^N§“*.~Šò¢êà zw«¢ë,ºšh®Ó¶ÃëjY^.+-٢¨kyøm¶ŸÿÃ&jÚèž',r‰¿r䒨&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf
< /BLOCKQUOTE>[/url]
Quote:


==========
courier new,courier">
[url=http://www.matronics.com/Navigator?Yak-List]http://www.matronics.com/Navigator?Yak-List
==========
cs.com
==========
matronics.com/contribution
==========


���~��,�

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a©ŠËD™¨¥Šî™K¶ŒjÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…«ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬®Œ,x(Z´P>-¢ÈZ­æ§vkœ†kœ†j+y¨kyøm¶ŸÿÃ&jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8ÒIaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šîš�




[b]


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
brad(at)runawaymedia.co.z
Guest





PostPosted: Mon Jul 15, 2013 11:09 am    Post subject: Performance Yak 52 Reply with quote

Further to this , I suppose its time to nail my colours to the mast. I have discussed this issue at length with Sergey , He did indeed acknowledge that there were problems with the deal, not wanting to dig further , he  voluntarily explained that the aircraft was bought over the net, sight unseen , some 10 or more years ago, during those years exporting out of the Ukraine was fraught with corruption and bureaucratic  red tape. And admitted freely that it was a deal that he would rather forget .I questioned him further about Art’s remarks that there were other soured business deals , but he said that there were none .
I too have had Business dealings with  Sergey, I have travelled to the Ukraine and bought a 52 from Him based, at the retired Limanskoye  Mig airbase on the Moldovan border.
I have spent a week with his family and got to know the children on first name basis.
He too is a small business owner , who has many connections into the M14P repair shops dotted around the Ukraine. And Between us have begun a process to develop a set of composite wings , flight surfaces and other parts.
I find him candid , and willing to go the extra mile to assist with finding engine parts and the odd L39 item when needed.
The hospitality we experienced was kind, but never patronising and what you would expect from a cordial friendship, which is what this has become.

I do not profess that we are the next OKB design bureau , but having a contact in the Ukraine , who speaks Russian is a current AN2 pilot, and is as passionate about aircraft design  as any of us  are , has turned out to be an adventure I want to continue with. (who knows what we will come up with?)

Yours sincerely
Bradly banks




From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Invert
Sent: 11 July 2013 08:54 AM
To: yak-list(at)matronics.com
Subject: Re: Re: Performance Yak 52

I have heard similar stories about Serge, no direct experience. Always 2 sides to every story of course.



Art
On 11/07/2013, at 4:33 PM, Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)> wrote:
Quote:

Thanks Bill, this why this forum is so important. I have asked for a reply, to establish the other side of the story. Ill keep you posted.

Brad





Sent from Samsung Mobile
-------- Original message --------
From: Håvard Dale <havard.dale(at)yaknorway.com (havard.dale(at)yaknorway.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52
Noted!



I also have only god experience with Termikas!



BR



Havard

Sendt fra min iPhone 4S
Den 11. juli 2013 kl. 00:04 skrev bill wade <bwade154(at)yahoo.com (bwade154(at)yahoo.com)>:
Quote:

Guys a very good friend of mine had a very bad experience with Serge, back in 2001. I purchased my Yak from Termikas and he really like the Yak 52 so he did a deal with Serge. Serge missed the delivery time and keep leading my friend on until he demanded delivery my friend got a nicely painted 5G derelict many parts were missing and all data plates removed an M14 N or II defiantly not a flying airplane. He went on to buy a damaged yak and used the derelicts parts to make a nice airplane. I was truly amazed that all skin parts matched up perfectly. Would not deal with Serge not trustworthy in my book, would deal with Termikas what he says is what you get!!

Bill Wade N4450Y

 

 

 

 

 

 

Serge has all the technical information regarding this project, it is by no means a commercial venture yet with a production line. But if you would like to be part of a select group of HP 52TD's then by all means join us. My design brief was that the composite set were to fit directly on to any existing 52 as a kit. Along with the electrical modifications.



Brad Banks





Sent from Samsung Mobile
-------- Original message --------
From: Håvard Dale <havard.dale(at)yaknorway.com (havard.dale(at)yaknorway.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52
Intresting,



But The Email adress is not in use?



Do you have pictures and more info on The wing kit?



BR

Havard
Sendt fra min iPhone 4S
Den 10. juli 2013 kl. 16:41 skrev Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>:
Quote:

During a recent visit to the Ukraine , I visited his factory. Sergey (serge) is a graduate of the MiG institute in Moscow. He is a composite specialist .I have commissioned a set of yak composite wings from him, myself. I can vouch for him , he is a very demure quiet man with little to say but enormous experience.

Brad





Sent from Samsung Mobile
-------- Original message --------
From: Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52
Sure its Sergey orlov and his company is airnotika ill put the email address up later on today





Sent from Samsung Mobile
-------- Original message --------
From: "Roger Kemp M.D." <viperdoc(at)mindspring.com (viperdoc(at)mindspring.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Re: Performance Yak 52
Interesting. Bradly do you have a web address or an email address for them. Google gave me some interior design company in Ontario, Canada.

Thanks,

Doc



Dale was not trying to be a pompous American. The T-6 (SNJ) was fitted with a tail hook for carrier qualifications. That design capability could feasibly be engineered for the 52, not that I have any interest in that. Now the wings that Bradly spoke of has peaked my interest.

Thanks,

Doc

Sent from my iPad
On Jul 10, 2013, at 8:10 AM, Bradly Banks <brad(at)runawaymedia.co.za (brad(at)runawaymedia.co.za)> wrote:
Quote:

If you're looking for a major weight improvement , , the Orlov design bureau in Odessa can sort you out with a set of composite wings +7-4 g in the TD configuration. Same wing design only with slotted flaps on each wing with electrical multi position actuator. 90L per side with intergrated tanks .Standard yak air operated retractable gear. All in for around $26, 000.



Regards

Brad Banks





Sent from Samsung Mobile
-------- Original message --------
From: Dale <dale(at)frii.com (dale(at)frii.com)>
Date:
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Re: Performance Yak 52
--> Yak-List message posted by: "Dale" <dale(at)frii.com (dale(at)frii.com)>

I wasn't talking about the BS tail hook stuff.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=404361#404361
==========================p; --> http://www=============================bsp;     -Matt Dra===============================

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a©ŠËD™¨¥Šî™K¶ŒjÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…«ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬Â®Œ,x(Z´P>-¢ÈZ­æ§vkϠkϠj+y¨kyøm¶ŸÿÃ&jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8Ã’IaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šî寃çá¶Úýú+ºk&jÚèž',r‰¡¶Úýú+ºk&jÚèž',r‰¿h¸¬´*'¶¸›ºØ¨Âg›J+^N§“*.~Šò¢êà zw«¢ë,ºšh®Ó¶ÃëjY^.+-٢¨kyøm¶ŸÿÃ&jÚèž',r‰¿r䒨&î¶*'†Ûiÿü0Âf­®‰ârÇ(›÷(žÚânëb¢Úý¿ß¢{¦·¿n‡rþf

< /BLOCKQUOTE>
Quote:
==========courier new,courier">http://www.matronics.com/Navigator?Yak-List==========cs.com==========matronics.com/contribution==========


���~��,�
¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§r‹«‰êç{(º¸ž­8^a©ŠËD™¨¥Šî™K¶ŒjÚèž',.+-æ­º·¬5«â«h®Ú®Œ,zØ^™©ò.+-ºØ¥ŠØž²Ëœ…«ŠËTŸô®nÇ+Š›b¢p+r¯y'š­ÈC£ å¡§{ ¬®Œ,x(Z´P>-¢ÈZ­æ§vkœ†kœ†j+y¨kyøm¶ŸÿÃ&jÚèž',r‰¿5«â«h­†¤.+-†Ûiÿü0Âf­®‰ârÇ(›óZ¾(¶ŠØjBâ²ßÚ0Ñ8ÒIaäT1$š™è+y«\¢{^žÖ¥²†¯j)ZnW¯‰«ayg›Šîš�




0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
Quote:
==========
0
Quote:
==========
1
Quote:
==========
2
Quote:
==========
3
Quote:
==========
4
Quote:
==========
5
Quote:
==========
6
Quote:
==========
7
[quote][b]


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Goto page Previous  1, 2, 3
Page 3 of 3

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group